Speed measurement - Import export

Doppler Radar true-ground-speed Sensor

Speed and Positioning Sensor with DGPS an Accelerometer Fusion

Speed Sensor with GPS and Accelerometer Fusion

■ Measuring on turbo vanes and shafts ■ TTL output for speed measurement ■ Analogue monitor output for gap control ■ High resolution ■ High dynamics ■ Low current consumption ■ High noise immunity

Especially designed for continuous measurement of velocity of solids and particles such as granulates, powders and dusts, which are transported in free fall or in pneumatic transport. Uses triboelectric correlation technology. • plugin sensor for easy retrofit • continuous speed measurement of solids • measurement directly in the conveying stream • material independent measurement

Measurement of the volume flow, especially in dusty applications. Easy installation on existing ducts, no venturi or similar conversions are required. • easy to retrofit • no calibration necessary • output in operating cubic metres • suitable for all diameters and geometries

Torque range from ± 0 - 0,01 Nm to ± 0 - 1500 Nm with speed or angle detection waterproof (IP67) contactless integral torque amplifier single supply voltage wide range of application small form low moment of inertia speed measurement (option) angle measurement (option) DRWPL series torque transducers are fitted with a number of gaskets in compliance with international protection IP67. The devices are also available with optional speed or angle detection for a host of applications. The integrated signal amplifier is powered with 12 V DC and outputs an electrically isolated analog signal of 0 to ± 10 V.

The Doppler traffic radar 24 GHz (IRZ SensR-24.01) is designed to determinate the range, angle (azimuth), direction and radial speed of vehicles movement by scanning the space in the forward hemisphere thus enabling traffic data collection and roadway performance analysis. The radar can be used as a part of vehicles video recording and registration systems (including ANPR and speed enforcement systems) or installed into variable message signs (VMS).

Continuous velocity measurement in tube version for careful material transport. Measures in full crosssection. • continuous speed measurement of solids in metal pipes • measurement directly in the conveying stream/entrained flow • measurement completely independent of material • sensor is made accordingly to the existing pipe diameter • measurement without product contact

Give your product the power it deserves with the new 25W Super Fast Charger. Use a Samsung USB Type-C cable to optimize charging speed. Use adaptive load to measure your device's capabilities. If the Ultra Fast Charger delivers a maximum of 25W to compatible devices*, it can also adapt to the capabilities of other models.

Give your product the power it deserves with the new 25W Super Fast Charger. Use the Samsung USB-C cable to optimize charging speed. Use adaptive load to measure your device's capabilities. If the Ultra Fast Charger delivers a maximum power of 25W to compatible devices, it can also adapt to the capabilities of other models. Ultra-fast charging requires a USB PD 3.0 compatible device in direct charging mode to achieve optimal charging speed. The actual charging speed may vary depending on the environment.

While the grain is carried upwards with the anchors made of hard material resistant to abrasion formed in appropriate dimensions on the rotor in an angled semi-cylindrical body made of stainless steel, the water is absorbed by the grain by subjecting it to intensive mixing at a measured speed. It is used in grain processing plants to ensure that the desired moisture content of the grains penetrate and feed the grain sufficiently. It brings the grain to be annealed with water and provides a homogeneous mixture. At the same time, a significant amount of peeling is ensured in the grain shell as a result of friction caused by the rotor rotating at high speed. Application Fields ◾ At food industry ◾ At the dry cleaning units of the flour and semolina mills ◾ At the grain processing plants where moistening process is required

Laser sensor Q4 – with a small form factor – Q4 for standard 2D / 3D measuring applications: Low sensitivity against influences of secondary light Measuring ranges from 5 mm to 1000 mm Laser wave lengths starting from UV via blue, red and green through to IR Average measuring speed up to 350 Hz frame The Q4 laser sensor has been designed to meet the requirements of standard measuring applications. Thanks to its increased flexibility, it can be used for several tasks also in complex projects. The dimensions of the ultra-compact version amount to only 86x40x25, at a weight of 140 g. Protective panes and cooling modules are available as an option. The Q4 laser sensor model enables users to obtain stable measuring results also on difficult surfaces, whether mirroring or transparent. The QS-View Standard Software comprises a comprehensive selection of application modules, to be invoked at once without previous programming steps. Customized adaptations are possible any time.

Speed cameras are still an excellent tool for making your town safer by reducing the speed of motorists. The Speed+ radar's design makes it visible from very far away, improving road safety or areas heavily used by pedestrians. Its technology can accurately measure the speed of vehicles travelling in both directions. The Speed+ speed camera is also available in a solar-powered version (monocrystalline photovoltaic panel). Detection of vehicles at 80 m Powered by public lighting or solar panel 240V (AC) street lighting, consumption 24W active, <1W standby 1 battery included Red and white reflective strips (40 mm) Two-colour display (red and green or red and amber super-bright LEDs) Circuit breaker (multi-circuit, 5A fuses)

With this anemometer ANE8903 you can measure both the wind speed and the ambient temperature.

With this anemometer ANE8903 you can measure both the wind speed and the ambient temperature.

Incremental rotation sensors are used wherever displacement, positions or speeds have to be measured accurately. They are therefore important interfaces between the mechanical and electronic parts of a machine. Mechanically robust, electrically reliable and resistant to extreme ambient conditions; these are the outstanding properties offered by this sensor. Typical applications include —Machine tools —Wood and plastic machining —Textile machines —Lifts —Door systems —Paper machines —Drive equipment —Assembly and handling equipment —Packaging machines —Scales —Test machines —Conveying equipment —Doors and gates Specific characteristics —Degree of protection IP65, all-around —Robust —High resistance to interference —Rotary speed sensor: 60 pulses/turn (standard) —Angular displacement sensor: up to 3600 pulses/turn —Detection of rotation direction (channels A and B) —Reference pulse (channel N) —Special versions on request

Wind speed measurement sensors The device measures wind speed and direction and is powered by its integrated solar panel. It also has a rechargeable lithium battery.

The turboSPEED DZ140 is designed for rotation speed measurements of turbochargers. The turbocharger rotation speed sensors are extremely compact and directly integrated in the turbocharger housing.

The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and bus controller can be integrated into any existing setup. The amplifier 9250 in conjuction with the fieldbus controller 9251 takes signals exactly to the point where they can be combined, monitored and linked efficiently to other data. The fieldbus interfaces give you flexibility, speed and perfect connections, and save you time, money and other resources when integrating your measurement setup with existing systems. Automatic sensor recognition due to burster TEDS lets you play absolutely safe, protecting you from setting incorrect parameters. The broad supply voltage range permits operation on standard power supplies used in switch gear cabinets.

The capaNCDT CST6110 is a capacitive rotation speed sensor system for counting tasks and rotational speed measurements of any type. The industrial measuring system consists of a dust proof, water tight controller and a compact sensors which can be integrated in confined spaces. The rotation speed sensor is used in centrifugal test benches, balancing machines, generators and engines, as well as shafts and drives. The CST6110 detects and counts blades, gearwheels and nubs with the highest precision and stability even in dusty, oily environments.

Rotation speed sensors are used to monitor, regulate and control mechanical drive systems and play a major role when it comes to protecting elements of a rotational system (e.g., in the engine, drive) from mechanical overload. Micro-Epsilon offers two sensor systems for rotation speed measurement. The capaNCDT CST6110 is a universal rotation speed sensor for counting tasks and rotation speed applications of any type. Moreover, the turboSPEED DZ140 measuring system is specifically designed for the detection of turbocharger rotation speeds.

The capaNCDT 6200 is the first entirely modular multi-channel measuring system. The controller can be expanded to 4 channels and is therefore suitable for flexible applications. All capacitive displacement sensors from Micro-Epsilon can be operated using the capaNCDT 6200 controller. The integrated Ethernet interface supports parameter setting and measurements via web interface. The DL6230 demodulator provides high resolution measurements. For high-speed measurements up to 20 kHz, the capaNCDT 6222 system is available.

Sensors can be adapted to suit customer-specific applications. Particularly for a large number of pieces, customized sensors can be produced efficiently, which results in considerable cost reductions. The compact PCB which contains the sensor element and the evaluation electronics is responsible for the signal preparation, signal evaluation and signal output. The type of measurement (distance or rotational speed measurement) and the required frequency response are adaptable. In addition, the interfaces offer numerous connectivity options. There are several outputs such as current, voltage, PWM and further digital outputs. The design of the housing, the material and the protection class can be adapted to the specific requirements. In cases where space is limited, the side shifted measurement offers a space-saving alternative. For harsh environments, the sensor is designed with a fully sealed stainless steel housing that withstands high pressure, dirt, aggressive chemicals (acids)

Other versions Profile MA07/1: Incremental, length, angle, rotational speed or number of pieces measurement LED display (1 line of 5 digits) Inputs for incremental sensors, length and angle measurement, rotational speed or number of pieces Free programming via front keyboard Incremental measurement function (operating mode I), actual value memory (operating modes I and S) With reference connection Programming enabled via external input (keyswitch) Compact design

4-row, 7 digits and backlit LCD. Up to three incremental measuring systems. Parameter setting with 4 keys and dial. Each axis is individually programmable. Connection for pluggable magnetic sensors MS100/1 or MS500. System accuracy up to 10 μm. Resolution 1 μm with MS100/1. Speed input measurement as an option. Two accuracy classes: 0.01 mm with magnetic sensor MS100 / 1 or 0.05 mm with magnetic sensor MS500.

FAST, FIELD-READY PROCESS MONITORING SYSTEM Performance, Reliability, and Versatility INFICON Transpector CPM has been the market-leading Residual Gas Analyzer (RGA) process monitoring system in the semiconductor industry for over a decade. Now Transpector CPM 3 provides industry leading measurement speed and sensitivity through a field proven pumping and inlet system integrated with a new sensor and electronics. Transpector CPM 3 is the ideal RGA process monitor for new and established semiconductor processes such as ALD, CVD, PVD, and Etch. Transpector CPM 3 provides proven return on investment to our partners through: 1 Ion source pressure reading @ low emission using total pressure lens 2 Total pressure accuracy @ low emission 3 Maximum ion source operating pressure @ low emission 4 2x10 -4 Torr in the ion source will produce about 1x10 -5 Torr in the quadrupole region 5 MDPP at the ion source with EM on and 1s dwell time 6 Mass 40 contribution onto 41 AMU 7 Zero blast...

DIGIFORCE® 9311 is the new standard in efficient quality control. The pioneering force/displacement controller delivers rapid, precise evaluation results for applications that demand both high quality and high productivity. The smart performance features and intelligent hardware make test equipment quicker to set up, easier to use and capable of automatic integration in modern production systems. This unrivalled product specification gives businesses the added security and dependability they need for increasingly complex production processes. The DIGIFORCE® 9311 monitors processes in which precisely defined functional relationships need to be demonstrated between two measured quantities of the process. For instance when recording and monitoring processes such as press-insertion, joining, riveting, stamping or caulking, reliable quality control depends on synchronous and high-speed acquisition of measured values combined with analysis based on versatile evaluation elements.