Speed measurement - Import export

Doppler Radar true-ground-speed Sensor

Speed and Positioning Sensor with DGPS an Accelerometer Fusion

Speed Sensor with GPS and Accelerometer Fusion

■ Measuring on turbo vanes and shafts ■ TTL output for speed measurement ■ Analogue monitor output for gap control ■ High resolution ■ High dynamics ■ Low current consumption ■ High noise immunity

Torque range from ± 0 - 0,01 Nm to ± 0 - 1500 Nm with speed or angle detection waterproof (IP67) contactless integral torque amplifier single supply voltage wide range of application small form low moment of inertia speed measurement (option) angle measurement (option) DRWPL series torque transducers are fitted with a number of gaskets in compliance with international protection IP67. The devices are also available with optional speed or angle detection for a host of applications. The integrated signal amplifier is powered with 12 V DC and outputs an electrically isolated analog signal of 0 to ± 10 V.

Laser sensor Q4 – with a small form factor – Q4 for standard 2D / 3D measuring applications: Low sensitivity against influences of secondary light Measuring ranges from 5 mm to 1000 mm Laser wave lengths starting from UV via blue, red and green through to IR Average measuring speed up to 350 Hz frame The Q4 laser sensor has been designed to meet the requirements of standard measuring applications. Thanks to its increased flexibility, it can be used for several tasks also in complex projects. The dimensions of the ultra-compact version amount to only 86x40x25, at a weight of 140 g. Protective panes and cooling modules are available as an option. The Q4 laser sensor model enables users to obtain stable measuring results also on difficult surfaces, whether mirroring or transparent. The QS-View Standard Software comprises a comprehensive selection of application modules, to be invoked at once without previous programming steps. Customized adaptations are possible any time.

With this anemometer ANE8903 you can measure both the wind speed and the ambient temperature.

With this anemometer ANE8903 you can measure both the wind speed and the ambient temperature.

In the field there is a frequent need to measure sensor readings rapidly and easily right at the sensor and to transfer them directly to a PC without additional amplifiers or converters. The 9206 USB sensor interface can satisfy this requirement admirably, thanks to its „plug & measure“ design. The USB connection means installation could not be simpler. Typical applications: —Mobile test measurements via laptop —Laboratory test set-ups —Instrumentation and control —Diagnostic measurements in the chemical industry —PC-based recording of expansion figures in bio engineering The USB sensor interface takes its supply from the connected PC via the USB port, and uses it to generate the power supply for the sensors. The initial settings and sensor settings are made by burster in-house and saved in the USB sensor interface. These can then be fine-tuned by the customer.

Incremental rotation sensors are used wherever displacement, positions or speeds have to be measured accurately. They are therefore important interfaces between the mechanical and electronic parts of a machine. Mechanically robust, electrically reliable and resistant to extreme ambient conditions; these are the outstanding properties offered by this sensor. Typical applications include —Machine tools —Wood and plastic machining —Textile machines —Lifts —Door systems —Paper machines —Drive equipment —Assembly and handling equipment —Packaging machines —Scales —Test machines —Conveying equipment —Doors and gates Specific characteristics —Degree of protection IP65, all-around —Robust —High resistance to interference —Rotary speed sensor: 60 pulses/turn (standard) —Angular displacement sensor: up to 3600 pulses/turn —Detection of rotation direction (channels A and B) —Reference pulse (channel N) —Special versions on request

The turboSPEED DZ140 is designed for rotation speed measurements of turbochargers. The turbocharger rotation speed sensors are extremely compact and directly integrated in the turbocharger housing.

The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and bus controller can be integrated into any existing setup. The amplifier 9250 in conjuction with the fieldbus controller 9251 takes signals exactly to the point where they can be combined, monitored and linked efficiently to other data. The fieldbus interfaces give you flexibility, speed and perfect connections, and save you time, money and other resources when integrating your measurement setup with existing systems. Automatic sensor recognition due to burster TEDS lets you play absolutely safe, protecting you from setting incorrect parameters. The broad supply voltage range permits operation on standard power supplies used in switch gear cabinets.

The capaNCDT CST6110 is a capacitive rotation speed sensor system for counting tasks and rotational speed measurements of any type. The industrial measuring system consists of a dust proof, water tight controller and a compact sensors which can be integrated in confined spaces. The rotation speed sensor is used in centrifugal test benches, balancing machines, generators and engines, as well as shafts and drives. The CST6110 detects and counts blades, gearwheels and nubs with the highest precision and stability even in dusty, oily environments.

Rotation speed sensors are used to monitor, regulate and control mechanical drive systems and play a major role when it comes to protecting elements of a rotational system (e.g., in the engine, drive) from mechanical overload. Micro-Epsilon offers two sensor systems for rotation speed measurement. The capaNCDT CST6110 is a universal rotation speed sensor for counting tasks and rotation speed applications of any type. Moreover, the turboSPEED DZ140 measuring system is specifically designed for the detection of turbocharger rotation speeds.

The capaNCDT 6200 is the first entirely modular multi-channel measuring system. The controller can be expanded to 4 channels and is therefore suitable for flexible applications. All capacitive displacement sensors from Micro-Epsilon can be operated using the capaNCDT 6200 controller. The integrated Ethernet interface supports parameter setting and measurements via web interface. The DL6230 demodulator provides high resolution measurements. For high-speed measurements up to 20 kHz, the capaNCDT 6222 system is available.

Sensors can be adapted to suit customer-specific applications. Particularly for a large number of pieces, customized sensors can be produced efficiently, which results in considerable cost reductions. The compact PCB which contains the sensor element and the evaluation electronics is responsible for the signal preparation, signal evaluation and signal output. The type of measurement (distance or rotational speed measurement) and the required frequency response are adaptable. In addition, the interfaces offer numerous connectivity options. There are several outputs such as current, voltage, PWM and further digital outputs. The design of the housing, the material and the protection class can be adapted to the specific requirements. In cases where space is limited, the side shifted measurement offers a space-saving alternative. For harsh environments, the sensor is designed with a fully sealed stainless steel housing that withstands high pressure, dirt, aggressive chemicals (acids)

Other versions Profile MA07/1: Incremental, length, angle, rotational speed or number of pieces measurement LED display (1 line of 5 digits) Inputs for incremental sensors, length and angle measurement, rotational speed or number of pieces Free programming via front keyboard Incremental measurement function (operating mode I), actual value memory (operating modes I and S) With reference connection Programming enabled via external input (keyswitch) Compact design

FAST, FIELD-READY PROCESS MONITORING SYSTEM Performance, Reliability, and Versatility INFICON Transpector CPM has been the market-leading Residual Gas Analyzer (RGA) process monitoring system in the semiconductor industry for over a decade. Now Transpector CPM 3 provides industry leading measurement speed and sensitivity through a field proven pumping and inlet system integrated with a new sensor and electronics. Transpector CPM 3 is the ideal RGA process monitor for new and established semiconductor processes such as ALD, CVD, PVD, and Etch. Transpector CPM 3 provides proven return on investment to our partners through: 1 Ion source pressure reading @ low emission using total pressure lens 2 Total pressure accuracy @ low emission 3 Maximum ion source operating pressure @ low emission 4 2x10 -4 Torr in the ion source will produce about 1x10 -5 Torr in the quadrupole region 5 MDPP at the ion source with EM on and 1s dwell time 6 Mass 40 contribution onto 41 AMU 7 Zero blast...

DIGIFORCE® 9311 is the new standard in efficient quality control. The pioneering force/displacement controller delivers rapid, precise evaluation results for applications that demand both high quality and high productivity. The smart performance features and intelligent hardware make test equipment quicker to set up, easier to use and capable of automatic integration in modern production systems. This unrivalled product specification gives businesses the added security and dependability they need for increasingly complex production processes. The DIGIFORCE® 9311 monitors processes in which precisely defined functional relationships need to be demonstrated between two measured quantities of the process. For instance when recording and monitoring processes such as press-insertion, joining, riveting, stamping or caulking, reliable quality control depends on synchronous and high-speed acquisition of measured values combined with analysis based on versatile evaluation elements.

Rotary Transducer with Angle Measurement Option CheckStar sets the standard for dynamic torque and angle measurement of all continuous drive and impulse tools, with proven reliable performance in thousands of applications worldwide. CheckStar transducers fit in-line between the assembly tool and the fastener, measuring the actual torques applied under production conditions. Whatever the vibration and shock loads experienced, CheckStar's patented contact system ensures contact is always maintained between the readout and the strain gauges. Inferior systems suffer from "brush bounce" that leads to unreliable torque readings. The low inertia design of CheckStar ensures accurate and repeatable measurement of high speed transients, such as the point of shut-off on continuous drive tools and the pulsing of impulse tools.

We develop and build test stands for pumps and can refer to several references in this field. In addition, we build press-off facilities and design them individually, including suitable risk assessment. Our process visualisation is suitable for customer presentations of the running pumps directly at the pump test stand. In addition, Merecs Engineering provides the connection to the IT infrastructure of our customers (ERP systems or databases). - Planning, calculations and construction - Coordination of suppliers - LabVIEW software development - NI-Real-Time & FPGA for high-speed evaluation of speed and acceleration measurement values - Vibration analysis via FFT (updated live) - LabVIEW, NI-cRIO and Siemens S7-1500 PLC in combination possible - Database connection - On-site assembly and IB

colorCONTROL ACS7000 is one of the most advanced inline color measuring systems in the world. Unlike conventional technologies, this system recognizes colors not just by comparing them to reference values, but also by using the reflection spectrum to ensure unique identification. Due to its very high measurement speed, the colorCONTROL ACS7000 is suitable for applications where colors and shades have to be examined on-the-fly and to very high accuracies. Due to the extremely high measurement accuracy, the system is also applied in laboratories, e.g. in industrial Research and Development. Different sensor models are available to suit various measurement tasks.

Capacitive displacement sensors are designed for measurement tasks that require extremely high precision. The capaNCDT 6500 capacitive multi-channel system is ideally suited to reliable measurements down to sub-nanometre resolution. The controller offers a maximum response rate of 7.8kHz (digital, with up to four channels) or a frequency response of 8.5kHz. As well as an analogue output, an EtherCAT interface is also available. EtherCAT enables accurate data transmission in real time, with high speed integration into the existing measurement environment and synchronisation of two systems. Set up and configuration of the capaNCDT 6500 system are carried out easily using a web browser.

Incremental or absolute, length, angle, speed or number of pieces measurement Profile MA10/4: High-contrast LCD (1 line of 12 digits) Display of units Inputs for incremental or absolute encoder (SSI), Free programming via front keyboard With reference connection Optional: RS232 or RS485 interface Optional: Switching outputs

Freely programmable, compact measurement display. Optionally, the positions of incremental measurement systems or rotary speeds as well as number of pieces can be displayed combined with commercially available initiators or light barriers. Incremental, length, angle, rotational speed or number of pieces measurement. LED display (1 line of 5 digits). Inputs for incremental sensors, length and angle measurement, rotational speed or number of pieces. Free programming via front keyboard. Incremental measurement function (operating mode I), actual value memory (operating modes I and S). With reference connection. Programming enabled via external input (keyswitch). Compact design.

Digital Panel Meter for speed display 96 x 48 mm (B x H) Relais output optional 1/mm for torque and speed measurement of pickups, with speed options. The device series M2 is equipped with a MIN / MAX memory and optional with two relay outputs. The powerful LED's and simple operation via keypad facilitate the handling of the equipment in daily operation. The display of this instrument installation is 5 digits and can be scaled relative to the input frequency.

Mobile test device for detection of the maximum torque (drag indicator mode) and for the detection of the power range (constant load) of motors in dental and dental surgical application area. arbitrary loading curves endurance test speed ​​measurement in aluminum case permanently installed Calibration disc and calibration will be in the trunk.

Series DRDL torque transducers are suitable for lab and industrial applications because of their small size and multiple mounting options. As supply voltage and output signal are transmitted without contact, the device can operate continuously with low wear and no maintenance. These transducers are also available with optional speed and angular measurement for a host of applications. The integrated signal amplifier is powered with 12 V DC and outputs an electrically isolated analog signal of 0 to ± 10 V per torque range. Simultaneous measurement of peak torque and operating torque Torquesensor with speed or angle measurement High accuracy with 100% overload protection 16 measurement range from ± 0 - 0,5 Nm up to ± 0 - 5000 Nm 2 torque ranges (1/10 - 1/2 of the 1st measuring range) Integral signal amplifier Low moment of inertia Single supply voltage Wide range of applications Multipurpose use Contactless output signals Compact Speed measurement (option) Angular measurement (option)