Results for
DOGA MAKINA
Turkey
Special dimensions Collet manufacture in Doga Makina. We produce your products as your technical drawings
Request for a quoteJANELA EXÓTICA, LDA
Portugal
Minimalistic sliding system specially suitable for large dimensions, which allows to have the maximum luminosity with the minimum visible section of aluminium, and makes possible to cover great openings with a glass surface of 94%. Its extraordinary glazing capacity allows to place glasses of up to 54 mm thickness which guarantees the best acoustic and thermal performance in a system with these characteristics. It is available in configurations of fixed and sash, 2 and 4 sashes, and the maximum dimensions are 4.000 mm/sash width/ height.. It has a visible section of just 25 mm and the possibility to inlay totally the bottom, lateral and top frames. It counts with the possibility of motorized opening for weights up to 700 kg, and manual opening for up to 400 kg. Additionally, it allows to place multipoint lock systems by operating rod, with or without key. The rollers are placed in the frame, and the sashes count with a stainless steel reinforced
Request for a quoteCAIXILHARIAS MANUEL COSTA UNIP LDA
Portugal
» Minimalist sliding system specially suitable for large dimensions (up to 4,000 mm/sash of width or height) » Possible to cover great openings with a glass surface of 94% » Visible section of just 25 mm » Outstanding thermal and acoustic performance » It comes with the possibility of motorised opening for sashes up to 700 kg, and manual opening for up to 400 kg. Additionally, it allows to place multipoint lock systems by operating rod, with or without key » The rollers are placed in the frame, and the sashes count with a stainless steel reinforced rolling area which makes the sliding movement smoother » Possibility of corner sash encounters at 90º without needing a mullion » The motorised version allows to completely hide the sash within the frame in closing position » Maximum glazing thickness 56 mm » Opening possibilities Sliding of 2, 4 or 6 sashes Up to 4 rail configurations 1 sash + 1 fixed / 2 sashes + 1 fixed
Request for a quoteIGUS® GMBH
Germany
iglidur® A200: Delicious FDA compliant material for applications with low to medium loads in immediate environs of (or contact with) food or drugs. Dimensions according to DIN 1850 and special dimensions. iglidur® A200 is available as cylindrical bearings, plain bearings with flange and thrust washers. The iglidur® A200 products comply with the requirements of the FOOD AND DRUG ADMINISTRATION (FDA) For direct use in the vicinity of (or in contact with) food or drugs For low speeds
Request for a quoteIGUS® GMBH
Germany
iglidur® W300: The endurance runner The specialist for extremely high wear resistance, also for rugged shafts or especially abrasive environmental media. Attain maximum holding times in your applications with iglidur® W300. Dimensions according to ISO 3547-1 and special dimensions. iglidur® W300 is available as cylindrical bearings, plain bearings with flange and thrust washers. For extremely high service life in continuous operation Low friction value Extremely high wear-resistance Suited for rough shafts and stainless steel shafts Dirt resistant
Request for a quoteIGUS® GMBH
Germany
Shaft diameter d1 [mm]: Request iglidur® multi-component bearing Even higher loads The new iglidur® multi-component bearing combines the benefits of a hard polymer shell and a tribooptimized iglidur® core to make a unique bearing: Service lives previously not achieved in with an injection- molded polymer bearing heavy duty pivoting applications even beyond a radial load of 120 MPa show the potential. Lubrication-free wear-resistant Extremely shape stable Corrossion-resistant Application areas: Agricultural engineering, utility and construction vehicles, mechanical engineering Dimensions according to ISO 3547-1 and special dimensions Chamfer depending on d1 d1 [mm]: f[mm]: Ø 1-6 0,3 Ø 1-6 0,5 Ø 1-6 0,8 Ø > 30 1,2 Shaft diameter d1 [mm]:
Request for a quoteIGUS® GMBH
Germany
News 2014 Lubrication-free drylin® screw drives: larger and high resilience, new sizes and many more… All News and line extensions Application examples Be inspired by our lead screw unit application examples. drylin® lead screw units - application examples 3D-CAD Faster and simpler designing with file formats for various systems. 3D-CAD Online-Shop Inform, select and order online. Information about drylin® screw drives, quick selection and order. Delivery in 24 h or today* DryLin® screw drives Find them quick with selection aids The product finder and the service life calculation offer you the possibility to find the suitable drylin® screw drives quickly. Product finder and lifetime calculation for screw drives Special dimensions Configurator for leadscrew nuts and -spindles for special dimensions. Screw drives special dimensions Classic format adjustments and lifting applications can be implemented with the self-locking trapezoidal thread. Quick adjustments or handling utilize the high ratio of the steep thread. In addition to steel, all spindles are available in stainless steel and thus provide a corrosion-resistant solution in combination with drylin® threaded nuts made of iglidur® plastics. Advantages: Maintenance-free, dry operation Low noise Insensitive to dirt and dust XYZKorrosionsfrei Trapezoidal thread and high helix thread High efficiency Anti-backlash function available FDA certification available Screw drives are machine elements that convert a rotary motion into a translational motion. drylin® screw drives are always based on self- lubricating plastic nuts and thus enable a life-long operation without external lubrication. The spindle (trapezoidal thread or steep thread) remains in dry operation, providing many technical advantages. For example, dirt does not stick to lubricants. The screw drive can thus be used on the one hand in applications with extreme dirt accumulation and on the other in the hygiene sector. Different thread types cover a wide range of applications. drylin® - Trapezoidal leadscrew nut - Technical data Classic format adjustments and lifting applications can be implemented with the self-locking trapezoidal thread. Quick adjustments or handling utilize the high ratio of the steep thread. In addition to steel, all spindles are available in stainless steel and thus provide a corrosion-resistant solution in combination with drylin® threaded nuts made of iglidur® plastics. Advantages: Maintenance-free, dry operation Low noise Insensitive to dirt and dust XYZKorrosionsfrei Trapezoidal thread and high helix thread High efficiency Anti-backlash function available FDA certification available drylin® screw drives: Efficiency measurement News 2014 Lubrication-free drylin® screw drives: larger and high resilience, new sizes and many more… All News and line extensions Application examples Be inspired by our lead screw unit application examples. drylin® lead screw units - application examples 3D-CAD Faster and simpler designing with file formats for various systems. 3D-CAD Online-Shop Inform, select and order online. Information about drylin® screw drives, quick selection and order. Delivery in 24 h or today* DryLin® screw drives Find them quick with selection aids The product finder and the service life calculation offer you the possibility to find the suitable drylin® screw drives quickly. Product finder and lifetime calculation for screw drives Special dimensions Configurator for leadscrew nuts and -spindles for special dimensions. Screw drives special dimensions
Request for a quoteIGUS® GMBH
Germany
iglidur® PEP, metric d1 [mm]: d2 [mm]: iglidur® PEP, inch d1 [inch]: d2 [inch]: When to use iglidur® PEP plain bearings? When a low-priced plastic plain bearing system is required When freedom is required from shaft material and shaft surface For the protection of expensive and sensitive shafts For extraordinary wear resistance with rare and slow movements. For constantly low coefficients of friction When freedom from corrosion is desired When not to use them? For high surface speeds iglidur® J For high loads iglidur® G iglidur® Q For high temperatures iglidur® V400 iglidur® X iglidur® Z When low-clearance bearings are required iglidur® P iglidur® X Maintenance-free plain bearings usually distinguish themselves by their ability to glide free of lubricants without any further additional layer on the shaft. In these systems it is obvious that shaft materials are as important as the bushings. igus® blazes a new trail with an enclosed and maintenance-free plain bearing concept. iglidur® PEP is an entirely novel lubricant-free plastic plain bearing system with an inner and outer ring. Special feature: The running partner is determined by the inner ring and for the first time, the material and surface finish of the shaft are insignificant. Even thread, rust or scratches do not affect the long-term reliable function. By the specification of the gliding partner and extensive series of tests, the long-term behavior of the bearing system can be precisely forecast. With the PEP polymer plain bearing, the inner ring rotates with the shaft like in ball bearings Relative movements of the shaft to the bearing are dispensed with. This protects the shaft surface from wear and saves costs. Another plus point: Even the most sensitive or unusual materials for the rotating shaft can be used with these new polymer bearings. The PEP polymer bearings are thereby absolutely free from material-dependent corrosion. Wear resistance The wear test results are absolutely convincing with loads up to 5 N/mm². Here the PEP polymer bearings attain values that are virtually comparable with those of the most wear-resistant plastic-steel bearing systems. An exceedingly satisfying result when you consider the costs saved by dispensing with the otherwise essential surface treatment of the shaft. The constantly low friction-coefficient level is also an advantage for the user. As the glide partners are fixed by the defined system, their tribological data too are accurately predictable. The coefficients of friction of the lubricant-free bearing are not determined any more by the shaft materials or surface conditions. If necessary, the coefficients of friction can be further lowered by additional minimum lubrication. Detailed test information with a wide range of lubricants are available and can be had from igus® on request. iglidur® PEP bearings operate independent of the shaft material. iglidur® PEP bearings consists of an inner and outer bearing. X = Load [MPa] Y = Wear [μm/km] A = PEP B = Combination 1 C = Comb. 2 D = Comb. 3 E = Comb. 4 F = Comb. 5 G = Comb. 6 H = Comb. 7 A1 = Wear of the outer bearing B2 = Wear of the inner bearing Fig. 02: Wear tests of various material combinations, p = 0.75 MPa, v = 0.3 m/s X = Load [MPa] Y = Wear [μm/km] A = iglidur® J B = iglidur® PEP Fig. 03: Wear of the iglidur® PEP bearing dependent on the load, v = 0.3 m/s iglidur® PEP, metric d1 [mm]: d2 [mm]: iglidur® PEP, inch d1 [inch]: d2 [inch]: Dimensions according to ISO 3547-1 and special dimensions
Request for a quoteIGUS® GMBH
Germany
iglidur® clip bearing, metric d1 [mm]: iglidur® clip bearing, inch d1 [inch]: iglidur® clip bearings are especially intended for the shaft bushing through plates. For this reason the bearing has a flange on each of the two front sides. After the clip-on the bearings are secured on both sides in the plate. The clip bearings have chamfered slot on the side that enables the mounting of the bearing on one side. After the mounting the bearing straddles and lines the bore in the plate. The shaft prevents the clip bearing from slipping out of the bore. The bearing cannot slip out of the bore even in axial movements. Extremely simple mounting through lateral slot Maintenance-free and self-lubricating Good flexibility in punch hole Good abrasion resistance Quiet operation Suitable for rotary and linear movements Extendibility through the slot Undetachable through double flange Special dimensions possible Plate thicknesses from 3 mm to 4 mm available from stock Material: iglidur® M250 Special properties of the iglidur® clip bearings iglidur® clip bearings are made from the most abrasion-resistant material, iglidur® M250. iglidur® M250 is a bearing material for rugged, wear-resistant bearing systems for medium loads. The bearings are self-lubricating and can be used dry. If required the bearings can also be lubricated. The material iglidur® M250 is resistant to all common lubricants. The iglidur® clip bearings are the ideal solution for bearing functions with low loads. The easy mounting makes it ideal for applications with difficult bearing locations. Compressive strength The permitted static surface pressure of iglidur® M250 amounts to 20 MPa at room temperature. Due to the good adaptability to uneven surfaces of the bearing housing, a high pressure load capacity of the clip bearings persists even in punched holes. For the most small bearing surfaces, the good vibration dampening properties and the insensitivity to misalignment are of primary importance. Surface speeds Clip bearings are particularly wear resistant in slow rotating, oscillating and axial motions. You can find the maximum gliding speeds for the various motions for the iglidur® M250 material under the materials data link shown below. A lubrication at installation or continuous lubrication raises the permitted surface speeds. Clip bearings are available from stock in dimensions of 3 to 25 mm. Fixation Triflex RS For mounting, the bearings are laterally pressed together with the large flange. The chamfered slot makes the bearing spiral-shaped, whereby it can be easily inserted in the plate. The remaining slot in the attached clip bearing can compensate for linear expansions of the circumference. Thus narrow bearing clearances are possible with clip bearings. The bearing clearance is dimensioned in such a way that in a housing bore with a nominal diameter, a shaft made with the same nominal diameter turns easily. The clip bearing can be used in H-tolerance housings up to H13. The turning of the clip bearing in the bore is also permitted. Operating temperatures The wear resistance of the iglidur® clip bearings are excellent with operating temperatures till 80°C. Even at low temperature the bearings remain elastic and abrasion resistant. When to use it? When a sheet metal feedthrough is required When the bearing should be captively clipped on in a drill hole with rough tolerance For rotating, linear and pivoting movements When a quick-mounting bearing solution is sought Clip bearings application examples When not to use it? When constant temperatures of more than +80°C occur iglidur® G When a high-precision bearing is needed iglidur® J When the housing bore is more than 4 mm long iglidur® Clips 2 iglidur® MKM When very high surface pressures occur iglidur® G iglidur® clip bearing, metric d1 [mm]: iglidur® clip bearing, inch d1 [inch]:
Request for a quoteIGUS® GMBH
Germany
igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm When to use it? When you want to save weight When rotating, oscillating and linear movements should be implemented When high-frequency oscillations/vibrations predominate When a low-noise operation is desired When an electrically insulating part is required When freedom from corrosion is desired For combinations with pneumatic cylinders and gas struts When chemical resistance is required When high stiffening is required When not to use? When you have temperatures above +80°C (then HT options) When rotation speeds in excess of 0.5 m/s should be implemented When very high tensile and lateral loads prevail When applications should be implemented with hydraulic cylinder When dimensions over 30 mm are needed igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm Special properties of the igubal® rod end bearings Maintenance-free, self lubricating High stiffening Very high fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight Dimensional series K and E, dimensions according to DIN ISO 12240 Version with metal sleeve in the spherical ball for enhanced torque Tolerances igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9. Please contact us in case you require lower or more bearing tolerances. Loads igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing. In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft. Delivery program igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the Form A - with male thread and Form B - with female thread The dimensional series K and partly E are moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).
Request for a quoteERLAS ADVERTISING INDUSTRIAL AND ARTISTIC PRODUCTS
Turkey
With 3D technology, the most effective advertising and promotion tool of recent years, we increase your brand's awareness and make you noticeable! From the food and beverage industry to entertainment, from shopping mall displays to entertainment venues, we offer creative and effective marketing solutions with 3D advertisements! In our 3D production park, we prepare models, characters and dummies specific to your brand's needs and expectations; we provide modeling, production and application services for your special projects. We add dimension to advertising with the most realistic models, characters that become tangible from the digital environment, durable and long-lasting models that provide ease of installation and use!
Request for a quoteARGOFILM
Greece
Open-mouth white bags are the most common bags intended for various uses, such as: feed, bran, betas, corn, rice, raw materials, soy, olives, wheat, flour, feed by-products, wood, charcoal, etc. they are open at the top so that the products can be easily shaded, while at the bottom they are doubled so that they do not open due to the weight during transport and storage. The white open mouth bags can be both twisted and twisted at the top, depending on what the customer needs. All white plastic bags can be printed according to the customer's wishes. The following table shows the main dimensions of the twisted bags, which we trade. It is always possible to place a special order for other dimensions.
Request for a quoteNORELEM FRANCE
France
Other threads, screw lengths and special versions. Dimensions “H1” and “A” available in other lengths at extra charge.
Request for a quoteOTTO EICHHOFF GMBH & CO. KG
Germany
PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces
Request for a quoteHAMBURGER DRAHTSEILEREI A. STEPPUHN GMBH
Germany
The processing of granules into coated long products requires high precision with tools and machine settings as well as sound expertise in the specific characteristics of the materials. As an extrusion specialist of steel cables and other long products such as wires, glass-fibre rods, we offer a wide service range: Plastic coating from ca. 0.5 to 24mm, PA, PE, PP, PUR and PVC and more, additives for special requirements, such as the UV and water resistance, circular cross sections and special dimensions and stock colours or your own selection.
Request for a quoteTYROLIT - SCHLEIFMITTELWERKE SWAROVSKI AG & CO K.G
Austria
Thanks to decades of experience and innovation, the Tyrolit range includes drill bits, including TGD® technology diamond wet drill bits, which fulfil almost all construction requirements. Especially in combination with Tyrolit drill motors, they offer reliable and clean results. Tyrolit fulfils the expectations of construction professionals with durable wet core bits for precise core drilling in various dimensions. — For reinforced concrete, steel, masonry, brick, sand-lime brick, fireclay brick, asphalt and special applications — Holders and connection threads in accordance with local standards for all motor types — Perfect system solutions with Tyrolit drill motors and drill rigs — Special dimensions and customised solutions on request Tyrolit offers vacuum-brazed diamond tile drills for wet and dry drilling (with paraffin), which enable precise drilling without edge chipping in tiles, porcelain stoneware and marble slabs.
Request for a quoteNORELEM FRANCE
France
Tension levers can be used for simple clamping or control operations. Where applicable, there must be enough space available so that the grip can be rotated 360°. On request: Other internal threads, reamed holes and special versions. Dimension “A” available in other lengths at extra charge.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NORELEM FRANCE
France
Enter the desired lever colour here. The standard colours are: Black grey clamping lever, traffic red push button. Orange clamping lever, black grey push button. Traffic red clamping lever, black grey push button. Where L ≥ 60 mm the thread length is 60 mm. On request: Other threads, screw lengths and special versions. Dimension “H1” available in other lengths at extra charge. Drawing reference: 1) flat point DIN 78
Request for a quoteANTHERMO GMBH
Germany
(Socked-Weld-Fittings) Straight from our warehouse We always have numerous versions of weld-in fittings (ANSI B 16.11) available in our extensive warehouse in Kamen. We can also supply you at short notice. We only deliver goods of European origin. 3 types of reducing inserts Insert reducers are available in three different types (see technical data sheet in the download area). Standards and special requests We supply weld-in fittings as standard in two pressure levels (3000 lbs and 6000 lbs) and in all common materials. We can also supply 9000 lbs and special materials if required. Technical specifications You can find more details, technical data and dimensions in our data sheet "Weld-in fittings" in the download area. We will be happy to provide you with information on special dimensions and custom-made products on request.
Request for a quoteTYROLIT - SCHLEIFMITTELWERKE SWAROVSKI AG & CO K.G
Austria
Since 1919, Tyrolit has pioneered technological advancements in construction tools, exemplified by our wall saw blades. We offer wall cutting blades in various quality lines (PREMIUM, STANDARD, TGD®), featuring diverse specifications, dimensions, and properties. Designed to meet varied customer and market needs, our wall saw blades are perfect for openings and breakthroughs in walls or ceilings, and for cutting reinforced or non-reinforced concrete up to 100 cm thick. Blades with TGD® technology ensure even load distribution and optimal cooling, extending blade life and reducing machine strain. Our SILENT design blades reduce noise by 10 dB, benefiting health and noise-sensitive areas. Tyrolit also provides wall saw blades in special dimensions and offers comprehensive application technology support.
Request for a quoteANTHERMO GMBH
Germany
Numerous designs available at short notice Branch connections on straight pipe sections Lateral outlets are used for 45 ° branches on straight pipe sections. Other departure angles are possible on request. Standards and special requests We deliver lateral outlets in two pressure levels (3,000 lbs and 6,000 lbs) and in all common materials. If required, we can also supply special materials. Technical specifications You can find more details, technical data and dimensions in our data sheet “Lateral outlets” in the download area. We will be happy to provide you with information on special dimensions and custom-made products on request.
Request for a quoteANTHERMO GMBH
Germany
Elbow outlets for 90 ° bends 1.5 D Up to 2 “elbow outlets fit on elbows of all diameters mentioned in our data sheet (see download area). Larger branches are manufactured precisely for the respective arch diameter. Standards and special requests We deliver elbow outlets in two pressure levels (3000 lbs and 6000 lbs) and in all common materials. If required, we can also supply special materials. Technical specifications More details, technical data and dimensions can be found in our data sheet "elbow outlets" in the download area. We will be happy to provide you with information on special dimensions and custom-made products on request.
Request for a quoteANTHERMO GMBH
Germany
Straight from our warehouse We have around 150 different versions of Socket Weld Outlets (ANSI B 16.11 / MSS SP 97) in our extensive warehouse in Kamen. We can deliver to you at short notice at any time. We only deliver goods of European origin. Standards and special requests We supply socket weld outlets in two pressure levels (3000 lbs and 6000 lbs) and in all common materials. We can also supply special materials on request. Furthermore, socket weld outlets differentiate between reduced and full branches. Express service We can deliver socket weld outlets in stock to the customer within Germany the next day if the order is received by 11.00 a.m. Simply specify when ordering if you would like to use this express service. Technical specifications More details, technical data and dimensions can be found in our data sheet “Socket weld outlets” in the download area. We will be happy to provide you with information on special dimensions and custom-made products on request.
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
ON SITE PRODUCTION FLEXIBILITY WITH CONTINUOUSLY VARIABLE DIMENSIONS Special circumstances and requirements often call for containers which cannot be produced using standard solutions. This is where special tanks and silos which can be adjusted to suit prevailing conditions and provide individual solutions are required. The LIPP System offers a variety of possible solutions to a wide range of problems in the form of welded or folded designs. Steplessly adjustable diameters and heights enable tank dimensions to be individually adapted to the prevailing conditions. In addition, on site installation only requires a minimal amount of space, for example enabling containers to be constructed in buildings or other situations where there is limited space available. Tank in tank solutions can also be realised using the LIPP System. Tank in tank solutions Container expansion, e.g. of concrete containers Installation inside buildings Mounting on platforms Mounting on various substructures
Request for a quoteKULLEN-KOTI GMBH
Germany
The strip brushes in cup form are also an all-purpose brush type. For special tasks we offer the dimensions from 20 mm to 1000 mm and through that cover a wide spectrum of applications. We provide you the following selection criterias: - All fill materials possible, e.g. natural bristles and hair, plant fibres and synthetic filaments. - As backing material we use galvanised steel-, stainless steel (1.4301, 1.4571) or brass tape. The same possibilities are available for the production of strip brushes in arch form, not only in semi circle form but also in any other pitch circle form. The larger the dimensions the better multiple brush segments can be mounted around the perimeter.
Request for a quoteFRIEDR. FREEK GMBH
Germany
HotMicroCoils have an exceptional capacity for being shaped - even in three dimensions. Many special winding patterns and geometries apart from the purely cylindrical are thus possible, allowing heating close to the contours of all manner of surfaces. Applications include hot runner manifolds, heating plates and hot die stamps. The shaped heating elements thus obtained can be used in two principal ways: either placed over the surface to be heated (firmly bonded by soldering, force-fitted, pressed or otherwise appropriately joined) or pressed into a positive fit in grooves in the surface to be heated. The second of these alternatives is also becoming more widely accepted in plastics processing, as it offers the best heat transfer because the heating area is the greatest (see also Freek Heat Transfer System). Since not all our customers have the necessary equipment and experience to press the HotMicroCoil elements into the contours of the surfaces, Freek also offers this as a service.
Request for a quoteMAGMETT METALL INC.
Turkey
Introducing Logistic: Your Ultimate Packaging Solution Logistic, brought to you by Magmett, is a comprehensive and sophisticated packaging system designed to cater to the diverse needs and demands of our esteemed customers. With Logistic, we offer an array of packaging solutions that guarantee utmost convenience and efficiency. One of the key features of Logistic is its ability to facilitate the serial packaging of profiles of various types and lengths. Whether you require packaging for aluminum, steel, or any other material, our system ensures seamless and secure packaging, maintaining the integrity of your valuable products. At Magmett, we understand that each customer may have unique packaging requirements. Hence, Logistic offers packaging in special dimensions tailored to your specific needs. We are committed to providing packaging solutions that align perfectly with your expectations, ensuring maximum satisfaction.
Request for a quotePIRPED INTERNATIONAL
France
Special Forgings Dimension :½" - 196" up to 35 000 kgs/pc
Request for a quotePIRPED INTERNATIONAL
France
Special Flanges Dimension : ½" - 196" up to 35 000 kgs/pc
Request for a quoteResults for
Special dimensions - Import exportNumber of results
108 ProductsCountries
Category