A beton - Import export

Self-levelling mortar based on cement, reinforced with fibres, modified by additives that give it the ability to be fluid and pumpable, especially intended for screeds and levelling of coverings with a thickness between 5 mm and 50 mm, which, once hardened, must be covered with coverings. USES Applicable on concrete or cement mortar supports. On supports with low porosity, apply a Fixmar Primer GR bonding primer beforehand. Regularisation of continuous screeds. Ideal in situations where a flat surface is required as a support for the subsequent application of another type of covering, such as parquet, carpet, ceramic, linoleum, ceramic materials, marble... Suitable for underfloor heating and as a finishing product for synthetic coverings.

It is a conglomerate of marble and cement aggregates, packed dry so that 1 user, by mixing it with the indicated quantity of water, obtains a non-structural concrete of adequate and constant quality to form volumes of materials, such as sidewalk concrete, curb concrete and filling concrete.

It is a conglomerate of marble and cement aggregates, bagged in a dry state so that the user, by mixing it with the indicated water, can obtain a mass concrete, reinforced or pre-contracted, of adequate and constant quality.

Self-levelling cement mortar modified with additives that give it the ability to be fluid and pumpable, especially for screeds and levelling of coatings with a thickness between 5 mm and 20 mm that, once hardened, must be covered with coatings. USES Applicable on concrete or cement mortar substrates, on low porosity substrates, apply previously a Fixmar Primer GR bonding primer. Regularisation of continuous screeds. Ideal in situations where a flat surface is required as a support for the subsequent application of another type of coating, such as parquet, carpet, ceramic tiles, linoleum, ceramic materials, marble... Suitable for underfloor heating and as a finishing material for synthetic coatings. Not suitable for wear surfaces.

Cement-based self-levelling mortar for low thicknesses 5-20 mm, type CT-C30-F7-A22, made with marble aggregates and special additives that give it optimum fluidity, to be used for the regularisation, repair and levelling of paving slabs. It is a product with high mechanical resistance and a good surface finish, ideal for the creation of continuous screeds. This mortar can be applied on a wide range of supports such as concrete, cement screeds, anhydrite, ceramic or natural stone, both indoors and outdoors.

Colored adhesive joint for sealing joints from 0 to 15 mm, with high resistance to abrasion and reduced water absorption. USES Seal joints between floor and wall tiles, both indoors and outdoors. Suitable for all types of ceramics and stones. Suitable for filling swimming pool joints.

Low-slip cementitious adhesive type C1T according to UNE-EN 12004:2017, designed with marble aggregates, cement and special additives that give it ideal adhesion, slip and water retention properties for laying ceramic tiles. USES For fixing tiles, medium/high porosity stoneware, in interior cladding, on traditional plaster supports. Prefabricated plasterboards and panels. Suitable for anhydrite substrates.

Latex formulated with polymers in aqueous dispersion which, pure in some cases, serves as an adhesion bridge, and in other cases, mixed with hydraulic mortars, improves their flexibility, their impermeability, their adhesion and their resistance to compression and traction.

The tile adhesive is a high-performance, single-component adhesive cement, designed, developed, and manufactured with selected marble aggregates, cement, synthetic resins, and other specific additives that provide it with excellent adhesion properties, as well as great flexibility and negligible slip. It is particularly suitable for use in thin layers, with low-absorption and large-format ceramic materials, for facades, high-traffic floors, and floors with underfloor heating. - Professional Adhesive C1T - 25kg Bag. (56 per pallet) - Porcelain Adhesive C2TE - 25kg Bag. (56 per pallet) - Flexible Adhesive C2TE S1 - 25kg Bag. (56 per pallet) - Flexible Gel - 25kg Bag. (56 per pallet) - SuperFlex Flexible Adhesive C2TE S2 - 25kg Bag. (56 per pallet)

Our dry concrete is produced using marble aggregates extracted from our underground quarry, resulting in exclusive properties and a high level of quality to meet the most demanding needs of our clients. - Beton sec H-25 - Béton sec léger - Béton sec autoplaçant H-25 / AR12 - Béton FAST & EASY

"We offer them a wide range of mortars and are constantly developing new products to meet the needs and demands of our customers. The uniqueness of our mortars lies in their production using premium-quality marble aggregate with very controlled granulation. This, combined with other carefully selected raw materials, gives them optimal qualitative characteristics." - Mortier M-7.5 Sec - Mortier Gris M5 - Mortier Gris M-7.5 Hydrofuge - Mortier Blanc M-7,5 Hydrofuge - Mortier de Chaux M5b

CEM II/A-P 52.5 R (25KG BAGS AND BULK)

CEM II/B-L 32.5 R (NF) (25-35KG BAGS AND BULK) CEM II/B-L 32.5 R (CE) (25-35KG BAGS AND BULK) MC 12.5 X (35KG BAGS) CEM IV/A (P) 42.5 N – SR (25KG BAGS AND BULK) CEM II/A-L 42.5 R (25KG BAGS AND BULK)

Industrial mortar composed of cement, lime, marble aggregates and special additives that give it good impermeability and breathability. It can be applied manually or using a spraying machine.

12/25 Pebble (Siliceous River Gravel) Mix (Sand + Gravel) 12/20 Gravel Big Bag

Dry concrete with a fine finish supplied in an ecological bag that dissolves in the presence of water, leaving the physical and chemical properties of the concrete intact. This system offers cleaner working conditions because it does not generate dust, safer because it avoids possible injuries when opening the bags and inhalation of dust, more sustainable because it does not generate waste and faster.

It is a conglomerate of crushed marble aggregates, lightweight aggregates and cement, bagged in a dry state so that the user, by mixing it with the indicated water, obtains a low density concrete of adequate and constant quality.

It is a conglomerate of marble and cement aggregates, bagged in a dry state so that the user, by mixing it with the indicated water, can obtain a mass concrete, reinforced or pre-contracted. Of adequate and constant quality.

Single-component powder mortar based on cement, marble and silica aggregates, synthetic resins and special additives that reduce water absorption and permeability and give it optimum workability and docility for its application, as well as being characterized by very high abrasion, high compressive strength, as well as an ideal fineness for a smooth finish.

Decorative mortar in microcement; single-component powder based on cement, marble and silica aggregates, synthetic resins and special additives that reduce water absorption and permeability and give it optimum workability and docility for its application.

Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready to use for interior and exterior use, with inert fillers that give it a textured surface.

Smoothing compound provides a fine finish with strong adhesion.

Industrial mortar composed of cement, lime, marble aggregates and special additives that give it good impermeability and breathability. It can be applied manually or using a spraying machine

Industrial mortar composed of cement, marble aggregates and special additives that reduce water absorption and permeability and give it optimum fluidity for manual and mechanical application, for daily use.

Industrial mortar composed of cement, marble aggregates and special additives which give it optimum fluidity for manual and mechanical application, for daily use.

Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready for interior and exterior use, with inert fillers that give it a textured surface.