Silicone resins - Import export

The cartridge emptying ViscoMT-C offers the possibility to empty 180 ml cartridges, 310 ml Euro cartridges and 600 ml or 950 ml cartridges in industrial use. Your advantages: - Plunger without direct air supply - Supply of media to the dispenser(s) - Venting option after cartridge change - electrical "empty" and "almost empty" message Controls: - Pressure sensor for inlet pressure control - Pneumatic pressure reducer for pre-pressure adjustment Application: - for low-viscosity media up to viscous media - Media examples: Silicones, adhesives, resins, greases, color pastes, metal-filled pastes Necessary and optional components: Dispenser suitable for dosing (separate article)

The ViscoMT-XS hobbock emptying system offers a modern way of emptying containers.The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from approx. 5 l to 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers - direct dosing as pulsation-free flow rate

The ViscoMT-XL drum emptying system offers a modern way of emptying containers. The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - Bridge frame can be driven underneath with drums on pallets - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers

The ViscoMT-D bin emptying system offers a modern way of emptying small containers and bins cleanly. The use of our dispenser series for the removal of the medium offers the following advantages: - container sizes from approx. 100 ml to 5 l - viscosities of approx. 80,000 - 1,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of filler-loaded material - no backflow within the withdrawal pump - electrical control of the pump with pressure control - direct dosing from the container possible - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: Removal of materials directly from the delivery container, e.g. silicones, adhesives, resins, fats, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes)

SilQon OMCTS ( Octamethylcyclotetrasiloxane ) is a clear liquid which has C8H24O4Si4 as chemical formula. It is a cyclic organic silicon substance which can be used as monomer in the production of silicone polymers such as rubber, resins and greases. Octamethylcyclotetrasiloxane is also known as D4. Availability Europe and United States Provided SilQon OMCTS is on stock in our local warehouses our lead time is about one week if delivered in 200 KG steel drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details.

The ViscoTreat-R preparation and feeding system ensures an even and reliable product supply. At the same time, the medium is optimally prepared for the production process by stirring and circulating. The use of the VRP dispenser series for the further transport of the medium offers the following advantages: optimal processing of viscosities up to 50,000 mPas very low shear stress of the medium very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - no air supply necessary - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - Stator material is adapted to the medium to be pumped Application: - Feeding and processing of medium to highly sensitive media, e.g.: Silicones, adhesives, resins, greases, colour pastes, metal-filled pastes

In order to meet the demands for robustness and efficient heat output, we have embroidered the heating element on a glass mesh fabric carrier material. Between the meandering arrangement of the heating strands, we integrate a recess for the temperature switch in the CAD layout. In addition, a second wire is laid concurrently as a PTC thermistor for the electrical connection of the safety switch. After the technical embroidery process, the safety switch is inserted and connected by our company’s respective department. Each prefabricated element is tested for functionality and performance in the final inspection and is delivered to the customer after passing the test. As a semi-finished product, the infrared heating element on glass mesh fabric can be further processed by the customer, e.g. in connection with silicone, rubber or epoxy resin.

The ViscoMT-L 3 / 18 barrel emptying system offers a modern way of emptying containers.The connection with the ViscoTec VMP dispenser series for the removal of the medium offers the following advantages: - container sizes from approx. 50 l to 300 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - removal of materials loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: Removal of materials directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers

Cast Resin BusbarBusbar trunking systems (E-Line CR Busbar: Cast Resin Busbar) provides the transfer and distribution of electrical current between 630A and 6300A. Explosion proof protected and compatible with E-line KX busbar modules. IP 68 protection class. The "DUROCOMP" synthesized material which has a high temperature and mechanical working strength composed of specially selected pure silicon minerals and epoxy resin, thereby protecting the E-Line CR busbar from external impacts.

MV Busbar (Medium Voltage Busbar) Easy Assembly E-Line MV Busbar, manufactured with state of the art technology starting at 12 kV and 24 kV. Ensures safe and effective power transmission. MV CR is manufactured within a single frame as Al and Cu conductors are embedded in the insulation material which consists of an alloy of exclusively selected silicon minerals and epoxy resin. Busbar system (Medium Voltage - Cast Resin Busbar) is designed to perform at 12 kV and 24 kV. It is manufactured for use up to 5700 A as a standard application.

High Temperature Paint Paint (140°C-200°C) with a silicon resin base, excellent adhesion, high resistance to oxidizing agents and fire. Ideal for exhausts, boilers, chimneys, stoves, flues etc. It does not get burnt or damaged. It is recommended that gradual heating of the painted surface to 250°C should take place after drying, so that optimal properties may be achieved. The dye is not suitable for painting surfaces that come into direct contact with flames

Product Identification Chemical name: Diphenylsilanediol Synonyms: Dihydroxydiphenylsilane, Diphenyldihydroxysilane CAS No.: 947-42-2 Molecular formula: C12H12O2Si Molecular weight: 216.31 Melting point: 135-150 ℃ Specification Appearance: White powder Purity: 98.00%min by GC Volatile: 0.10%max Package Regular Packing: N.W 25kg/plastic drum Sample Packing: 0.1kg-1kg plastic bottle Transportation Information Classification: Class 4.1 dangerous goods UN 1325 PG II HS Code: 2931900090 Status & Application Status: Commercial available Application: Used as a silicone rubber structure control agent to reduce the structuring phenomenon of silicone rubber and improve the processing performance of silicone rubber; it can be used to synthesize phenyl silicone oil, phenyl silicone resin, phenyl silicone rubber Chemicalbook, etc.; It can be used as modified intermediates of polyurethane resin, epoxy resin, acrylic resin, PP, PET, PE, etc.

Product Identification Chemical name: 1,1,3,3-Tetramethyl-1,3-divinyldisilazane Synonyms: Tetramethyldivinyldisilazane, DVTMDS, 1,3-Divinyl-1,1,3,3-tetramethyldisilazane, Bis(vinyldimethylsilyl)amine CAS No.: 7691-02-3 Molecular formula: C8H19NSi2 Molecular weight: 185.41 Boiling point: 161-163 ℃ Density: 0.819g/mL @ 25°C Specification Appearance: Colorless transparent liquid Purity: 95.00%min by GC Impurity (Divinyltetramethyldisiloxane): 5.00%max by GC Color (APHA): 50 max Package Regular Packing: N.W 160kg/iron drum Sample Packing: 0.1kg-1kg plastic bottle or under request Transportation Information Classification: Class 3 dangerous goods UN 1993 PG III HS Code: 2931900090 Status & Application Commercial available; Application: It can be used to produce silicone rubber, silicone colloid and vinyl silicone resin.

Smooth coat for decorate and protect all types of brickwork surfaces in general, it is formulated by using silicon resins, combining a high repellence to the humidity and an excellent permeability to the water vapour, achieving a extreme durability. Paint with a coating protect that provides an excellent protection against a wide range of fungus and algae.

The vetronites may contain epoxy, polyester, melamine and silicone resins with different thermal class depending on the model chosen. They have excellent mechanical and dielectric characteristics and are suitable for use in many sectors and are the excellence for the electromechanical sector. It should be noted that FR4, GPO3 and FR5 glass elements are self-extinguishing according to the UL 94 V0 standard. The GPO3 and FR5 material are also non-marking and halogen-free. The GPO3 material is a layered insulation based on glass mat and filled polyester resin and is used for machined and sheared pieces. It has good mechanical properties and is suitable for blanking up to 6mm thick. It has good dielectric properties. The FR4, G11 and FR5 laminates are layered with a glass fabric and epoxy resin base. They have different thermal classes. LG11 material exists in two versions: - Insulation class F (155 ° C), code LG11 - Insulation class H (180 ° C), code LG11H

Suitable for outdoor facades: Professional Silicate Facade Paint AS17 can be applied universally to viable lime- and cement plaster, concrete, and brickwork. Also very well-suited for External Thermal Insulation Composite Systems (ETICS) as well as wheathered, matt dispersion- and silicone resin coats. Solvent-free, silicate dispersion paint enriched with nano-quartz-particles (silicate sol) in accordance with VOB/C DIN 18363 2.4.1. Its special composition and ingredients create an inseparable microporous bond with the substrate. This silicification results in perfect adhesion and achieves an extremely good durability even on critical substrates. Highest color stability: A1 (FB-Code, BFS-MB Nr. 26).

Suitable for outdoor facades: Professional Silicate Facade Paint AS17 can be applied universally to viable lime- and cement plaster, concrete, and brickwork. Also very well-suited for External Thermal Insulation Composite Systems (ETICS) as well as wheathered, matt dispersion- and silicone resin coats. Solvent-free, silicate dispersion paint enriched with nano-quartz-particles (silicate sol) in accordance with VOB/C DIN 18363 2.4.1. Its special composition and ingredients create an inseparable microporous bond with the substrate. This silicification results in perfect adhesion and achieves an extremely good durability even on critical substrates. Highest color stability: A1 (FB-Code, BFS-MB Nr. 26).

fluid 010 dissolves pollutions like: oils, greases, resins, silicon, residues of anti-corrosion agents, colorbatches, etc. It evaporates without residues.

fluid 015 dissolves pollutions like: oils, greases, resins, silicon, residues of anti-corrosion agents, colorbatches and tough stains like baked-on polymer residues. It evaporates very slow, but without residues.

Power Jet dissolves pollutions like: oils, greases, resins, silicon, residues of anti-corrosion agents, colorbatches, etc. Power Jet dissolves nearly all kinds of label adhesives. It evaporates without residues.

fluid 050/H1 dissolves pollutions like: oils, greases, resins, silicon, residues of anti-corrosion agents, colorbatches, etc. It evaporates without residues. Fluid 050/H1 can be used fast evaporating lubricant during the assembly of rubber parts.

Material Phlogopite mica flakes, silicon resin, tanged stainless steel insert (AISI 316L in 0.1 mm)