Mechanical processing - Import export

Other information Installation video: Instructions for the opening and closing of the E-Tubes Series R117 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the inner radius on both sides Series R118 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the outer radius on both sides Series R157 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the inner radius on both sides Series R158 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the outer radius on both sides Series R167 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the inner radius on both sides Series R168 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the outer radius on both sides iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request Other information Series R117 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the inner radius on both sides Series R118 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the outer radius on both sides Series R157 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the inner radius on both sides Series R158 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the outer radius on both sides Series R167 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the inner radius on both sides Series R168 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the outer radius on both sides Installation video: Instructions for the opening and closing of the E-Tubes E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E2 R100 and E2 R Chip protection, swivelable Excellent protection against chips (even hot chips) Rugged and tight Snap-open alternately along inside or outside - Swivelable or removable lid, short installation time Space-saving through good internal/external dimensions ratio Modular interior separation options Double stop dog system for longer service life and long, unsupported lengths Universal KMA mounting brackets with potential for "all-round" fastening Typical industrial sectors and applications Machine tools Timber Processing Machines General mechanical engineering etc In all areas exposed to dirt and chips iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request

Special cylinders developed and manufactured according to individual customer requirements, specifications or specifications. Both as a completely custom-made special cylinder or modified inexpensively using standard elements with adjustments in form, function, mount, connection or material.

Forged parts made of steel, stainless steel and aluminum including mechanical processing. Pressed brass blanks including mechanical processing, also on rotary transfer machines. Sintered parts made of sintered bronze, sintered porous brass and stainless steel. Filter elements for air, liquids and fuel made of sintered ball material or mesh.

Our new products are inspired by bag styles that have stood the test of time. Fashion is constantly changing and new bag models are created every season. However, true classic style has irreplaceable value due to its exclusivity and timeless design. Philip Zepter leather bags are pieces that are not subject to the current fashion and season and that you can wear forever. Presentation All products are handcrafted in Italy from natural, genuine cowhide leather (embossed). Cow grain leathers are valued for their resistance to dirt and moisture. The veneering process involves the leather being mechanically processed, dyed and covered with wax. As a result, it gains unparalleled smoothness and shine. Delightful with delicacy, nubuck leather combines the beauty of suede with the durability of grain leather. It is resistant to distortions. Nubuck bags and wallets not only enchant with their appearance, they are also not afraid of the passage of time or intensive use.

Our new products are inspired by bag styles that have stood the test of time. Fashion is constantly changing and new bag models are created every season. However, true classic style has irreplaceable value due to its exclusivity and timeless design. Philip Zepter leather bags are pieces that are not subject to the current fashion and season and that you can wear forever. Presentation All products are handcrafted in Italy from natural, genuine cowhide leather (embossed). Cow grain leathers are valued for their resistance to dirt and moisture. The veneering process involves the leather being mechanically processed, dyed and covered with wax. As a result, it gains unparalleled smoothness and shine. Delightful with delicacy, nubuck leather combines the beauty of suede with the durability of grain leather. It is resistant to distortions.

Another working area of the Suvis GmbH is the field of innovative sensor systems applied to particle and flow measurements taking into account microsystems. We develop novel flow and particle sensor systems for the application in environmental technology, process and mechanical engineering, and automotive technology. Important aspects are robustness and economicalness of the complete sensor system in order to create for the above mentioned application fields practical and affordable solutions. The respective sensor system will be developed as a whole solution. This means besides the hardware set up that we also take care of the evaluation of the sensor signals with our own solutions. We develop from scratch up to prototype level including periphery technology development. Please contact us for a not binding offer. We would like to know more about your challenge!

Based on the longstanding experience in the field of industry optics, Befort is your optimal partner for the new development and production of customer specific optics and mechanooptic systems. Our experts will find and realize the best solution for your optical problem. Solutions may be based on a variety of technologies, such as spherical, refractive optics, but also freeform optics, micro optics, diffractiveaspheric or plastic optics. Furthermore, we integrate electronics, sensor technology, controls and image processing jointly with external partners. OUR SOLUTIONS ARE APPLIED IN A VARIETY OF MARKETS Medical technology Automotive Mechanical engineering Industrial image processing Laser technology Defense Sensor technology

Cane sugar is produced by means of technologies rather similar to those used in a beet sugar plant that are also fully mastered by DSEC. Sugar cane is however a totally different plant compared to sugar beet: whereas sugar beet is sowed and can be harvested after +/- 6 months, cane takes longer to grow but grows back after it has been cut and can therefore be harvested several consecutive years (4 to 6) before being replanted. Cane can be cut either manually or mechanically before being directly processed in the mill. Cane plantation location in relation of the plant is of paramount importance so as to reduce sugar losses by the degradation of the plant after cutting as well as to minimize logistic costs. DSEC will select the most appropriate methodology for extracting the juice from the cane after its first shredding. The extraction operation will be performed using mill tandem or cane diffusion while additional mills will press the residual solid (bagasse) in order to increase its fiber content while additional mills will press the residual solid (bagasse) in order to increase its fiber content. Pressed bagasse will be used as fuel for the plant combined heat and power generation that will generally export electricity on the public grid. The choice between mill tandem and diffuser will be highly dependent on plant capacity, cane characteristics, expected extraction performances and plant general concept.

We are aluminium profile processing and supplying company for global aluminium user firms. We also supply aluminium casting, foil and sheet products too. We serve several mechanical processes like cutting, drilling, tapping, spilling, bending, sizing and mounting. We prepare customer’s orders in package with accessories and assembly guide inside and barcodes outside as shared by the inquiries.

It is used in mechanical processing of metals and non-metallic structural materials in mechanical engineering (turning, milling, planing, chiseling and drilling). Hard alloys and composite materials based on tungsten carbide are widely used In the mining industry, as well as mixtures of tungsten carbide, titanium carbide, tantalum carbide (TT grade for particularly severe processing conditions, e.g. chiselling and planing of forgings made of heat-resistant steels, or impact drilling of heavy-duty materials). We buy scrap of the following categories: Tungsten 4, Tungsten 5, Tungsten 6

As a manufacturer of control cabinets, we are always at your side. We process standard cabinets as well as special designs for our customers. We take care of construction and wiring plans directly according to customer specifications, as well as the mechanical processing, the construction and the wiring of the control cabinets. After the actual construction, we also carry out an electrical test and insulation tests. Upon delivery, you will receive the customer-specific labels and accompanying documents. Your advantages with A + B Electronic -Switch cabinets directly according to your specifications -We are not just a service provider, but a technology partner: A + B Electronic thinks your project with you and together we can bring it to series production successfully

Warehousing and logistics have been our core business since 1977. Our service includes all things related to the storage, transloading, and handling of plastics (both granulate and regrind), rubber, elastomers, paper, phosphates, and animal nutrition. We also have a recycling department for the storage, transloading, and mechanical processing of both dangerous and non-dangerous solids. We do all our work with a strong focus on you, the customer: top-notch quality, a customer-oriented approach, and bend-over-backwards flexibility to effectively meet all your logistics challenges! Warehousing Management System (WMS): A crucial component for success Our warehouse management system is an indispensable link in our service chain. It adds significant value for our customers, who profit from optimal management information in every phase of the process, from transport and storage to handling and upgrading. We work with a proven, comprehensive WMS that not only gives us maximum control over ou