Measurements - Import export

In these training courses, we teach the basics of the various measurement techniques, the selection and use of suitable measuring instruments as well as the evaluation of measurement data. The following topics are taught in concrete terms: Fundamentals and concepts of measurement technology; measurands and units; Traceability; Technologies; Signal conversion and digitalization; Selection and use of suitable measuring instruments. In addition to the general overview training, we also offer specific training courses on measurement technology for the following measurands: Temperature; Pressure; Flow (volume and mass flow); Force and elongation; Distance and velocity; Oscillation. By arrangement, you can design the training according to your wishes! We are happy to respond to your individual questions and concerns. Since we regularly expand our training portfolio, please contact us if the metric you are looking for is not listed.

We offer the service for HGL hardware and software in Germany, Austria, and Switzerland. Together, we can work out your needs and create an attractive service package. From billing for individual hours to complete packages that include regular upgrades of hardware and software, a lot is possible. We would be happy to provide you with an individually tailored service package.

Do you own a measuring device from HGL Dynamics and want to use it to obtain reliable measured values in the future? In this case, calibration is essential. We will advise you on the selection of the right calibration method for your amplifier. In addition, we also offer a factory calibration of your HGL measuring devices according to your specifications. All calibration references we use are traceable to national and international standards. We will be happy to prepare a suitable offer for this.

We design this training according to your wishes: For newcomers, we offer basic seminars on dynamic data acquisition. It doesn't matter whether you already have a measuring system or want to procure one first. We explain the basics of the most common sensors used in dynamic measurement technology, explain the general functionality of dynamic measuring systems and show, using the example of HGL hardware and software, how a dynamic measurement task can be prepared, carried out and evaluated. If you already have measurement technology from HGL, we offer you further courses to further deepen and optimize the handling of hardware and software. Here we focus entirely on your needs. We can provide an in-depth overview of the various hardware or software components or concentrate on individual aspects and deepen them.

Fuel Transporter Monitoring, Sensor application in the mining industry, Application on diesel generator sets, Heavy machine monitoring, Garbage Truck monitoring, Concrete mixer monitoring, Precision monitoring in refrigerators, On a high voltage line and etc.

3D scanning aids engineering, reverse engineering, and quality inspection, streamlining development in sectors like motorsport, aerospace and manufacturing. Accurately capturing complex shapes and forms with high accuracy and speed, surpassing traditional measurement methods in many ways.

1 m flexometer in resistant white ABS, with bamboo insert on the body and transport ring. With wide branding surface and blade with measurements in centimetres and inches. Clip Included Bamboo/ ABS

In this training course, you will learn about different measurement methods that you can use for your measurement tasks. You will learn how to select and apply the appropriate measurement method. You will get an overview of the advantages and disadvantages of different measurement methods, such as optical, acoustic, or electrical methods. The training is aimed at anyone involved in measurements, e.g. engineers, technicians, quality managers or scientists. The training lasts one day and covers the following topics: Measuring principles and application examples; Optical, electrical, thermal, mechanical, ... measurement; From measurands to measurement data; Structuring the test task; Documentation.

For customers who prefer an individual software solution, we offer various interfaces for the integration of HGL measuring devices. These range from low-level network APIs, Windows® DLLs, LabVIEW™ toolkits, and iDDS support to single-instrument applications (apps) for simple measurement tasks. This flexibility allows the user to choose the best solution for each specific use case. Contact us for more information.

Program overview E2 micro Program overview EasyChain® A = energychain 045.10.028.0, not part of the article B = signal cables C = K2

Measurement and control technology from Heidenhain Regardless of whether you require measurement devices for your machine tools or length measurement systems – Heidenhain is your best option for challenging positioning tasks. With over 40 years of experience with measurement and control technology from Heidenhain, we can offer you a broad range of products to meet a variety of requirements in your plant. The encoders are available for various ranges with and without integral bearings and we also supply sliders and sensing heads for length measurement systems. A lot of our products also include comprehensive technical information documents, such as operating instructions and product information. We can supply general reconditioned repairs as well as new, replacement and exchange parts for current and discontinued modules and always at fixed prices.

Our measuring microscopes accommodate highquality optics in a robust lightmetal body. They are universally applicable, e.g. for testing hardness, evaluating Brinell and Vickers hardness, in graphics or for noncontact measurement of small parts and small distances. Our 20x/7 mm, 30x/5 mm, 40x/4 mm, 60x/2 mm and 100x/1 mm measuring microscopes feature batteryoperated LED illumination as standard.

Housing polyamide 6. Hollow shaft steel. Screen plastic. Grub screw steel. Version Impactresistant housing. Hollow shaft black oxidised. Grub screw black. Dial black, digits white. Note Position indicators allow direct reading of input measurement values at a glance. In addition, the value indicated per spindle rotation (corresponding spindle pitch) can be selected and the various indicator values are realised by a transmission gear. The position indicators are distinguished by their small construction with very clear display. They are especially suitable for small spindle distances and small shaft diameters and have a torque support that is positioned in a hole on the side. ** At the 1st asterisk give assembly position and at the 2nd asterisk give the count direction (see sample order “assembly position, count direction”). Technical data – Counter consisting of 3 10position dials – Height of figures about 4 mm – Hollow shaft Ø 10 H7 mm

The Befort measuring magnifier design provides for a parallaxfree reading. Measuring magnifiers are available with 6, 8 and 10fold magnification. Measuring plates are exchangeable.

Befort measuring microscopes are robust, flexible usable and are optimally suited for daily use in a tough production environment. The handling of the measuring microscopes is easy and their image quality is impressive

The line laser is a measuring device for aligning drive pulleys laterally, horizontally and vertically using a laser beam, preventing heavy wear to the edges of the belt. Laser beam range approx. 5 to 10 m Laser class 2 (EN 6082511997) Wavelength 630–680 mm Power < 1 mW Power supply 2 x 1.5 V (LR44) Note Never look directly into the laser beam and do not point it at other people, animals or strongly reflective surfaces. The device and the target points contain highpowered magnets. Individuals with pacemakers should not use the device due to safety reasons. Keep a safe distance away from electronic devices and wristwatches in order to prevent interference. The device must not be used in potentially explosive areas.

The tension meter is used to perform a pretension test on commercially available belt systems quickly and easily by means of frequency measurement. Fully electronic and equipped with stateoftheart microprocessor technology, the meter enables precise adjustment of all V, toothed and flat belts that have to be tensioned in the range from 10 to 600 Hz. The measurement must never be performed while the drive is running The meter is not permitted or certified for use in potentially explosive areas.

power consumption electricity costs CO2 emissions operating time on a large LCD display and easy-to-use buttons.

Cylinder series with dimensions based on ISO 15552 with an integrated position measuring system based on magnetostriction. The position sensor allows a high degree of accuracy in measuring the cylinder position. Analogue output signal 0-10 V via M 12 connector.

5 metre flexometer with metal blade and locking mechanism. With soft body in varied colors, coated with protective cover made of resistant rubber, metallic clip for belt and carrying belt. With special die-cut for doming and presented in an individual box. With Brake and Clip Included

3 metre flexometer with metal blade and locking mechanism. With soft body in varied colors, coated with protective cover made of resistant rubber, metallic clip for belt and carrying belt. With special die-cut for doming and presented in an individual box. With Brake and Clip Included

Learn how to calculate and interpret the measurement uncertainty of your measurement results. In this training, you will learn the basics of measurement uncertainty analysis, how to apply the GUM method, how to create measurement uncertainty budgets, and what makes ASME PTC19.1 different from GUM. You will learn how to determine measurement uncertainty budgets and how to use them to efficiently optimize the measurement uncertainty of measurement setups. In the training, we focus on: Mathematical Fundamentals; Definitions and terms; Application of the GUM method; Creation of measurement uncertainty budgets; Calculation of measurement uncertainty; Analysis and critical appraisal. You can design the training according to your wishes! Holding a workshop in which you actively contribute your problems has also proven to be a good idea. We are happy to respond to your individual questions and concerns.

Scalable amplifier in 19" format The compact solution for complex measurement tasks. •,Up to 32 analog input channels •,2 freely configurable analog and digital outputs each (other options available on request) •,8 digital inputs •,Up to 100kHz bandwidth synchronously sampled across all channels (higher bandwidths available on request) •,16/24 bit resolution with 110+dB signal-to-noise ratio •,Form factor ideal for installation in 19" cabinets •,Freely scalable from an amplifier with 32 channels to multiple devices with any number of channels (e.g. 32 devices with a total of 1024 channels) •,2x Ethernet interfaces, connection for external 12V power supply, LVDS connection for synchronization of several Dragonfly amplifiers (IRIG and GPS optionally available) •,Various options for connection design (depending on signal conditioning) •,Digital inputs and outputs optionally available

The Hawk user interface gives you full control over your measurement. The interface of the Hawk GUI offers the possibility of a simple and clear configuration of all measurement channels, as well as the control of data acquisition during the actual measurement. It also provides an overview of the organization of all measurement PCs and amplifiers in the network. •,Interface for configuring all connected measuring devices. •,Configuration of various limit values to monitor the measurement. •,Seamless recording of your measurement •,Define individual time ranges (manoeuvres) to make them easier to identify in the downstream analysis. •,Configuration of additional, external amplifier hardware can be integrated. •,No license fees for using the software. •,MS Windows compatible

Real-time monitoring of the measurement The HawkEye software offers various forms of representation for monitoring and controlling the ongoing measurement. Any number of pages can be created in the software with different forms of presentation of the measurement data. By supporting a server-client architecture, monitoring is scalable and can be distributed across any number of PCs. •,Real-time phase analysis •,Speed signals are calculated and displayed in real time. •,Different forms of representation for the measurement signals (time domain, FFT, Bode diagram, orbit, waterfall, machine order monitoring) •,Real-time monitoring and visual representation of implemented limit values. •,Visual and acoustic signal when limit values are exceeded. •,The screen layout can be flexibly adapted to the respective monitoring requirements and user needs. •,No license fees for using the software. •,MS Windows compatible

A fully equipped computer that can be used to record data from connected Dragonfly amplifiers. Depending on the number of connected devices and CPU power, data can also be processed for real-time monitoring and forwarded to a network-connected PC or laptop. •,Different CPU versions (Core i3, i5 or i7) are available. •,Internal SSD stores data from connected Dragonfly amplifiers •,12V power supply (also possible via Dragonfly battery) •,Ideal for systems that record data autonomously over a longer period.

With the classic network switch in Dragonfly case format, Dragonfly amplifiers can be connected bundled to a PC or to a larger network. In combination with a Dragonfly PoE (Power over Ethernet) module, this switch can be used to power Dragonfly amplifiers. •,10x 1GB/s Ethernet ports (8 ports with PoE support) •,Bundle the data streams from multiple Dragonfly amplifiers to forward them to a PC or laptop. •,Front LEDs to indicate connection and power supply via PoE.

With the Dragonfly PoE (Power over Ethernet) module, amplifiers connected via a Dragonfly network switch can be powered via the network cable. •,Maximum output power of 150W to power up to 8 Dragonfly or 3 Hummingbird32 amplifiers. •,Less cabling required, as the power supply is ensured via the network cable.

The Dragonfly battery is designed to enable measurements in areas where power is not available from the local power grid. •,Capacity of 100Wh (power supply of a typical Dragonfly amplifier for up to 10h runtime) •,One battery module can also power several Dragonfly amplifiers (with correspondingly shortened runtime) •,Several modules can be combined to extend battery life. •,Can be used as a UPS (Uninterruptible Power Supply).