Equipment machine - Import export

Machines and (or) equipment including those used at hazardous industrial facilities, for which types of hazard have been detected and identified, the requirements for elimination and reduction of which are set out according to the Annexes № 1 and № 2 to the regulations. Annexes № 1 and № 2 to the regulations contain basic and supplementary safety requirements for machines and equipment. Used machines and (or) equipment, or those produced for own manufacturers’ needs Component and spare parts to machines used for repair (maintenance) of machines and (or) equipment Machines and (or) equipment meant to maintain integrity and stability of communication networks performance and use of RF spectrum Machines and (or) equipment used for medical purposes and used in direct contact with a patient (Xray, diagnostic, therapeutic, orthopedic, dental, surgical equipment) Machines and (or) equipment specially designed for nuclear energy use area.

The twisterchain product line offers a wide range for circular movements and is available in four sizes. Modular in width and radius, therefore flexible in applications where rotary and spiral movements up to 360° and more with high loads and smooth operation are required. The twisterchain applications are available with guide trough, which has the following advantages: guidance of the energy chain, reduced abrasion of the energy chain, optimal operational smoothness, rotation angle up to 360° from stock. - Strong, high fill weights, smooth operation, weight-optimised - Rotary speeds up to 1m/s and more - Circular/spiral movements up to 360° from stock (up to 400° upon request) - Cable-friendly, smooth interior crossbars openable along the inner and outer radius - Successfully tested for over 1 million cycles in the igus laboratory

SALIMOGULLARI HOTEL CAFES FURNITURE TABLES CHAIRS Salimogulları is an innovative company specialising in the production of custom-designed furniture, including tables and chairs, exclusively for cafes, restaurants and the hospitality sector. They are known for their progressive design, close collaboration with clients and architects, and commitment to sustainability. With the ability to produce high quality tables and chairs tailored to specific needs, fast delivery capabilities and a vision for global recognition, Salimogulları is a trusted name in the industry.

Screw on rubber impact buffers can also be used as equipment or machine feet.

Suitable for emergency stop and continuous use Energy reduction: 58% to 73% Dynamic force absorption: 870 N to 35190 N Impact velocity: max. 5 m/s. The profile dampers are maintenance-free and are supplied ready to install with a special fastening screw. Environment: Resistant to microbes, sea water, chemicals and with very good UV and ozone resistance. No water absorption or maceration. Fastening screws: Special cap screws with hex sockets, material 44SMn28 (free-cutting steel SAE 1144) electro zinc-plated: M6x9, M6x10, M8x14, M12x18, M16x26 ISO 4762 cap screws with hex sockets - 8.8 steel, black: M3x6, M4x8**, M5x10** ** With DIN 125 washer, electro zinc-plated steel. Application: Linear slides and linear guides, pneumatic cylinders, handling equipment, machines and plants

Nowadays, engineers use highly specialized licensed software. Due to the construction complexity of certain diagram types or providing a strength calculation directly on the designs and parts blueprints, such software is a completely separate area of the engineering arsenal.Professional strength expert’s specialization allows taking a completely new look at the preliminary calculations of production and construction. Thanks to the masterful work of such specialists, each manufacturer may apply the famous «Rockefeller formula» when saving on one rivet or a couple of millimeters of material save millions on an industrial scale. Expert calculations of structural strength, presented in several versions, depending on the shape and material of the part, are extremely voluminous and require plug-ins to complement engineering programs. Services included in the professional strength engineer portfolio: Dlubal RFEM 5; ANSYS; NX Nastran; Robot Structural Analysis; Static and Seismic Calculat

CNC machines programming – is a method used for generation of software instructions for managing machines, units, mechanisms. As a result, the correctly adjusted and algorithmized equipment allows to automate the production process and to ensure higher flexibility of the company for industrial requirements and tasks. GFE-Solutions’ specialists provide algorithmization services for the operation of CNC machines of any type using profile software remotely for industrial enterprises throughout Europe. During operation and preparation of new algorithms, GFE-Solutions’ specialists are guided by advanced technical documentation of the industrial company, as well as reasonable quality standards in the customer’s industry that allows finding an optimal economic, technical and operational solution. Within the framework of cooperation, we can send both an outstaffed employee and a complete team of software engineers with conduct visit to the customer’s for expert evaluation, ensuring the comple

Precise analytical engineering comes to be an acute aspect in a case the complex project development. One involves a structural analysis of each individual component and the entire structure as a whole. Correct technical parameter computation is especially important while designing equipment parts or complexes. Both cases, product complexity compression to a technically safe and functional level positively affects its cost in terms of material savings. To conduct strength calculations — a key parameter determining the material cost and design features of the future product shape — a completely separate class of engineering specialists is required. Strength Engineers use all their vast experience and the entire breadth of technical mechanics, materials, geometry, and even architecture knowledge base to build the most functional and reliable product, parts, and entire complex project designs.

Main Technical Data Production Speed Up to 1000 pcs/min Production Linear Speed 280 m/min max Efficiency 85-90% Product Width (min-max) 70-115 mm w/o wings, up to 165 including wings Product Length (min-max) 180-320 mm Required Air Pressure 6 bar Noise Lower than 90 dBa Basic Machine Features • Top sheet with NW side barriers • Fluff core with short ADL layer • Core anatomic shaped according to customer design • Core embossing according to customer design • Back sheet • Release tape glued on line • Edge sealing & contour cut out according to customer design • Wing tape glued on line Optional Machine Features • Thermo sealing for three pieces top sheet • Videojet printing on ADL • Individual easy wrap fold • Pouch tape • Bypass for straight product

Welding inverters of the PRO series are light in weight and dimensions. The metal housing reliably protects the internal components, making it suitable for use on the construction site. Inverters are capable to operate with all brands of stick electrodes from 1.6 to 5 mm and 6 mm (VIKING 250PRO, VIKING 270PRO), including the УОНИ 13/55 brand. The minimum arc welding current is 30 A, the maximum one corresponds to the model. TP at maximum current for all models is 60%. Mains voltage range is 160 ... 260 V.

TORUS-255 has the widest possible range of arc welding currents (from 20 to 255 A), which makes it possible to use it both for welding very thin metals, including in the TIG mode (welding with non-consumable electrode), and for continuous welding of large metal structures using an electrode up to 6 mm in diameter. The operating margin in the ТОРУС-255 device is such that it can be effectively used not only for the MMA and TIG modes, but also in the surfacing and cutting modes. At the same time, the weight of the device itself is traditionally not big – only 5.7 kg. Like all devices of the ТОРУС line, ТОРУС-255 has increased reliability with all its maximum parameters. A 3-year manufacturer’s warranty is a guarantee of its high performance in the most severe operating conditions.

SANDVIK 55077880 ALTERNATOR TAMROCK STARTERS AND ALTERNATORS FOR ENGINES SANDVIK SPECIAL EQUIPMENT AND INDUSTRIAL MACHINES Voltage 28 V Current strength 100 Am Size B 80,00 mm Chip type82

Experience the convenience of our comprehensive office furniture import service. We handle sourcing, logistics, and delivery, ensuring you receive top-notch office furniture that suits your business needs.

The equipment that guarantees total hygiene and safety control The Pass-120 Boot Sanitizing Station is a disinfection equipment that guarantees strict hygiene control of the operator's boots. With automatic soap dosing system and two rotating brushes 700 mm long and 170 mm in diameter. This equipment is very easy to implement, has an ergonomic design and an input and output system controlled by photocells. The most competitive price-quality ratio on the market Automatic soap dosing Entry and exit step controlled by photocells 700 mm long rotating brushes Footwear sanitized in milliseconds Stainless steel construction Cabinet with lock for the disinfectant bottle

A high-performance device The cortex fish peeler CBF 496/7 is an automatic two-line equipment ideal for skinning fresh or smoked salmon. With an ultra-compact design, easy to use and complying with all hygiene and safety protocols. This machine offers three skinning methods: deep, with a sharp blade; thin and silvery, which pulls the skin out. A 100% automatic equipment for skinning fish Does not affect the final quality of the product stainless steel bearings Safety cover with pneumatic spring A new ally in your production line Complies with all hygiene and safety protocols Higher income

Do you need a multi-function and self-propelled Mini-Digger to work quickly and efficiently, while maintaining maximum comfort and safety? Contact us at EcoBio2010@hotmail.com We offer jobs with our Mini-Digger at 30 € / Hour. https://ecobioseptictanks.godaddysites.com

We produce an high effective industrial oil absorbent on basis natural peat moss. Oil absorbent ARCTIC has ability to biodegradation. Due to its excellent buoyancy, it is successfully used not only on soil and any hard surface, but is also especially effective on water. Oil absorption is 8-10 g oil per 1 g absorbent. Oil absorbent ARCTIC environmentally friendly, non toxic, absolutely safe for humans and animals. After use, it can be disposed of as a high-calorie secondary fuel when burned in boiler plants.

WF 905 – Single needle cylinderbed, extra heavy duty walking foot machine, equipped with pneumatic presser foot lifter, back tack, large shuttle hook and reverse. Stitch length up to 11 mm. Max. machine speed 800 spm.