Battery packs - Import export

This portable power supply for medical use is a nice example of co-creation. Our client came up with the idea to create a powerful battery for the medical world. It can be used on equipment trolleys that allow the medical personnel to get right up to the patients’ beds. The battery is so powerful that one charge is enough to power it for an entire shift. Naturally, this battery pack had to be properly protected and practical to use. That is where Enbi Plastics came in. From the very beginning, we were involved in product development: from the first sketches to a complete end product that helps medical professionals do their work. For the design, we took into account practical usability and safety: there are no sharp edges, the battery pack is splash proof and the design underwent drop tests. In addition, the choice for medical grade plastic means it is also easy to clean. The addition of the inserts – gilded contacts – required a lot of precision. These are melted in by us in-house.

Rentaload offers the rental of direct current load banks, allowing the reliability of a battery to be tested. Testing using load banks validates the operational performance and battery life of a system. It tests the inverter and generator under load conditions. Indeed, these tests, most often performed during preventive maintenance, can determine the condition of the inverter’s batteries and battery packs (or “strings”) and indicate whether individual cells are in good condition or approaching end of life and must be replaced. The load bank test will ensure that the backup system batteries will work together as expected when called upon to support a critical load.

To effectively respond to the technological expectations of its customers and satisfy the different market needs, Silga is able to offer a wide and complete range of products ranging from printed circuits with standard characteristics to highly complex ones. Silga offers single-copper flexible PCBs , double-sided flexible PCBs with metalized holes (PTH), flex therm for heat dissipation, Gigaflex for the sensorized connection of the battery pack to the BMS in e-vehicles and Flexible Heaters for heating and removal of the condensation. Silga flexible PCBs find application in numerous sectors such as automotive, EMS, industrial, medical and wearable.

Dual access copper connections are an innovative technique for the creation of single-sided FPCs (flexible printed circuits), which however also require a connection on the other side. Thanks to the dual access copper technique developed by Silga it is possible to directly connect the tracks of a single-sided FPC to a support, safely and effectively. The advantages? Among all the possibility of avoiding the use of nickel tabs for the connection; in fact, the dual access copper technique guarantees direct contact and consequently greater robustness by virtue of the fact that additional welding is not required (critical aspect of the robustness of the products, also linked to the stress generated by dimensional variations), which is instead necessary for nickel tab. Furthermore, in the case of connection to battery packs, based on customer needs in terms of materials used in the busbars and the type of welding

The package includes Battery pack Mounts for mounting 2 pcs External battery cable 2 pcs User's manual

An optional battery pack can be connected to the UPS to extend the available runtime. Up to four Battery Modules can be connected to one UPS

An optional battery pack can be connected to the UPS to extend the available runtime. Up to four Battery Modules can be connected to one UPS.

An optional battery pack can be connected to the UPS to extend the available runtime. Up to four Battery Modules can be connected to one UPS.

An optional battery pack can be connected to the UPS to extend the available runtime. Up to four Battery Modules can be connected to one UPS.

Special UPS for elevators. It combine with 12x5V battery pack. It is for in-panel use.

Cradle 10535 Steel cradle, open Suitable for 1400ml (3:1) 2K side-by-side cartridges Application example: auto windscreen adhesive, hybrid adhesive... Lithium-ion battery pack with 14.4V // 3.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charge time approx. 40 minutes Drive Extrusion force up to 6500N (650kg) Extrusion rate adjustable from 120 to 240mm/min Automatic pressure reduction prevents material from dripping Benefits LED charge indicator on the battery pack Clean, even working Less fatigue, particularly when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 90W Output: 14.4V A 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-10535-14.4V / Li-Ion 1 battery pack 14.4V // 3.0AH // Li-ion (lithium-ion) 1 rapid charger with charge indicator and Euro plug Additional battery pack available on request Weight: complete set in transport case

Cartridge cradle 7508 Suitable for 825ml 10:1 side-by-side cartridges Application example: Using 825ml 10:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack, 14.4V // 3.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion force up to 6500N (650kg) Extrusion rate adjustable from 120 to 240mm/min Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using highly viscous products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7508-14.4V Li-ion 1 cartridge press for 825ml 10:1 side-by-side cartridges 1 14.4V Li-ion battery pack 1 rapid charger with charge indicator and Euro plug 1 plastic case Additional battery pack available on re

Cartridge cradle 3030 Suitable for 600ml 1:1 side-by-side cartridges Application example: Using 600ml 1:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack with 14.4V // 3.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion force up to 6500N (650kg) Extrusion rate adjustable from 120 to 240mm/min Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-3030-14.4V Li-ion 1 cartridge press for 600ml 1:1 side-by-side cartridges 1 battery pack, 14.4V Li-ion 1 rapid charger with charge indicator and Euro plug 1 plastic case Additional battery pack available on

Cartridge cradle 7575 Suitable for 1500ml 1:1 side-by-side cartridges Application example: Using 1500ml 1:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charge time approx. 30 minutes Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 1500ml side-by-side cartridges per battery charge. Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7575-10.8V Li-Ion 1 cartridge press for 1500ml 1:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with charge indicator and Euro plug Additional battery pack available on request Weight

Cartridge cradle 4515 Suitable for 385ml and 585ml 3:1 side-by-side cartridges Application example: Using 385ml and 585ml 3:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 585ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-4515-10.8V Li-ion 1 cartridge press for 385ml and 585ml 3:1 side-by-side cartridges 1 battery pack 10.8V L

Cartridge cradle 3015 Suitable for 450ml 2:1 side-by-side cartridges Application example: Using 450ml 2:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack, 10.8V // 1.5AH with LED charge indicator Rapid charger with charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 28 450ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using highly viscous products No annoying air tubes or electrical cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-3015-10.8V Li-Ion 1 cartridge press for 450ml 2:1 side-by-side cartridges 1 10.8V li-ion battery pack 1 rapid charger with charge indica

Cartridge cradle 9545 Suitable for 1400ml 2:1 side-by-side cartridges Application example: Using 1400ml 2:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charge time approx. 30 minutes Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 1400ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-9545-10.8V Li-ion 1 cartridge press for 1400ml 2:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with charge indicator and

Aluminum tube 600ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 600ml 1K sausage packs or 310ml to 600ml cartridges Application example: from kitchen and bathroom tile joints to auto windscreen adhesive Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 5000N (500kg) Extrusion rate with speed control 50 – 330mm/min Performance: 45 cartridges of 310ml Silicone for a fully charged battery at room temperature Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical drops. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 10.8V A 2A Security: CE and GS checked Packaging DynamicMax Type HPS-6T-10.8V Li-Ion 1 pc. Li-Ion battery pack 10

Cartridge cradle 4C Suitable for 380ml to 410ml 10:1 coaxial cartridges Application example: Using 380ml to 410ml 10:1 coaxial cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack, 10.8V // 1.5AH with LED charge indicator Rapid charger with charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 38 380ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using highly viscous products No annoying air tubes or electric cables in the working area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPS-4C-10.8V Li-Ion 1 cartridge press for 380ml to 410ml 10:1 coaxial cartridges 1 10.8V Li-ion battery pack 1 rapid charger

Cartridge cradle, suitable for 310ml 1:1 coaxial cartridges as well as 310ml 1K cartridges Application example: Using 310ml 1:1 coaxial cartridges of e.g. fire-extinguishing foam. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 38 310ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPS-3C1-10.8V Li-ion 1 cartridge press for 310ml 1:1 coaxial cartridges 1 battery pack 10.8V Li-ion 1 rapid charger w

Cartridge cradle 7515 Suitable for 900ml 5:1 side-by-side cartridges Application example: Using 900ml 5:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 900ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7515-10.8V Li-Ion 1 cartridge press for 900ml 5:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with c

Cartridge cradle 3030 Suitable for 600ml 1:1 side-by-side cartridges Application example: Using 600ml 1:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 600ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-3030-10.8V Li-Ion 1 cartridge press for 600ml 1:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with c

Cartridge cradle 2020 Suitable for 400ml 1:1 side-by-side cartridges Application example: Using 400ml 1:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 28 400ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Packaging PowerMax type HPD-2020-10.8V Li-ion 1 cartridge press for 400ml 1:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with charge indicator and Euro

Cartridge cradle 1010, Suitable for 210ml 1:1 side-by-side cartridges Application example: fitting door frames, installing stairs... Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 28 400ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical drops. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 10.8V A 2A Security: CE and GS checked Packaging PowerMax type HPD-1010-10.8V Li-ion 1 cartridge press for 200ml 1:1 side-by-side cartridges 1 battery pack 10.8V Li-Ion 1 rapid

Cartridge cradle 6030 Suitable for 900ml 2:1 side-by-side cartridges Application example: Using 900ml 2:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 900ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-6030-10.8V Li-Ion 1 cartridge press for 900ml 2:1 coaxial cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with charge

Cartridge cradle 7508 Suitable for 825ml 10:1 side-by-side cartridges Application example: Using 825ml 10:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 825ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7508-10.8V Li-Ion 1 cartridge press for 825ml 10:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger wit

Cartridge cradle with position indicator (consumption indicator) Suitable for 310ml coaxial cartridges as well as 310ml 1K cartridges Application example: composite mortar for fixing purposes, silicon cartridges or sealants Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 38 310ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPS-3 CS-10.8V Li-Ion with position indicator 1 cartridge press for 310ml coax

Aluminum tube 400ml Aluminum tube, turnable, with plastic screw connections at front and back Suitable for 310 or 400ml 1K cartridges or sausage packs Application example: kitchen and bathroom tile joints, acrylic joint adhesive… Lithium-ion battery pack with 3.6V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 3000N (300kg) Extrusion rate with speed control 50 – 330mm/min Automatic pressure reduction to avoid chemical materials drops out. Performance: 30 cartridges of 310ml Silicone for a fully charged battery at room temperature. Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical materials drops out. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 3.6V A 2A CE checked and GS proved Packaging Dyn

Cartridge cradle 3003 suitable for 345ml 10:1 side-by-side cartridges. Also suitable for 310ml 1K cartridges Application example: using 345ml 10:1 side-by-side cartridges, e.g. composite mortar for securing anchors. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 35 345ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using high-viscosity products No annoying air tube or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-3003-10.8V Li-ion 1 cartridge press for 345ml 10:1 side-by-side cartridges 1 b