Air heating - Import export

Customized air-water heat exchangers for industrial use Three types of air-water heat exchangers Three different designs o air-water heat exchangers The Anthermo GmbH delivers three different designs of air-water heat exchangers: Finned tube heat exchangers Lamella heat exchangers Straight tube heat exchangers These heat exchangers are designed in a way, that inside the tube water or another liquid circulates. The air flows around outside the tubes or the fins/lamellas. The connection between the fins and the tube is used to enlarge the space for heat transfer between the liquid and the gas fluid. The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-water heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.

Customized air-air heat exchanger for the industry (up to 1.000°C) Hot outgoing air and cold incoming air Very often hot exhaust gas gets out in the environment without any use. On the other hand cold incoming air must be lead into the production process and shall be warmed. This occurs for example very often within drying technology. In this case air-air heat exchangers can be used very efficient in heat recovery. As result you have great potential to save energy expenses. Three types of air-air heat exchangers The Anthermo GmbH delivers three types of different air-air-heat exchangers: cross-flow heat exchanger straight-tube heat exchanger flat-tube heat exchanger The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-air heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.

Air-water / air-air heat exchanger as smooth tube heat exchanger up to 1,000 ° C Smooth tube heat exchanger as an air / water heat exchanger In the case of air-water heat exchangers (also called gas-water heat exchangers), a temperature exchange takes place between a gas (usually air) and a liquid. As a rule, the liquid medium flows inside the pipes, while the gaseous medium flows around the pipes outside the pipes. Smooth tube heat exchangers can cover various areas of application: heating, cooling and condensing as well as heat recovery. Smooth tube heat exchanger as air-to-air heat exchanger Smooth tube heat exchangers are also often used as air-to-air heat exchangers. In this application, a gas (e.g. exhaust air or exhaust gases) flows inside the pipes and a gas (e.g. fresh air) outside the pipes around the pipes.

Temperature exchange between a gas and a liquid In the case of air-water heat exchangers (also called gas-water heat exchangers), there is a temperature exchange between a gas (usually air) and a liquid. Finned heat exchangers can cover various areas of application: - heating and evaporating, - cooling and condensing as well as heat recovery. In this context, lamellar heat exchangers are also called air heaters or air coolers. Air-water heat exchangers are often also used as exhaust gas heat exchangers or flue gas heat exchangers in order to recover the energy from warm or hot exhaust gases. Lamella packs for a large exchange area In order to achieve the largest possible exchange surface between the air and the medium (liquid) within the heat exchanger, lamellas or lamella packs are attached to the pipe system.

Efficient use of waste heat (up to 1.000 °C) In many production processes waste heat occurs in form of hot air which is put out to the environment without any use. Very often these hot gases are contaminated air. On the other side clean (cold) air must be warmed up for the production process. In these cases cross flow heat exchanger can reduce the energy costs. The hot air stream will be conducted in the cross or counter flow method over the cold air inside the cross flow heat exchanger. Though both air streams are strictly separated because of the construction of the heat exchanger and they don´t get mixed (leakage less than 0,5 %). Only the energy of the hot waste stream is transferred to the cold clean stream.

Temperation of fluids Pillow plates are used everywhere where liquids must be temperated. In dependence of application the liquids can be cooled or heated. Cause of this wide range of applications pillow plates are used in the process industry, in the cooling industry and in a lot of other industries. Pillow plates are also know as heat exchanger plates, evaporator plates, cooling plates /sheets and thermo plates / sheets. Pillow plates as air-/water-heat exchanger Additionally to the temperation of liquids pillow plates are also used as air-/liquid heat exchangers. In case of polluted or wasted air and if there are high demands for cleaning, more and more pillow plates are used as air-/water-heat exchanger. The large exchange surface and the good possibilities for cleaning are important features for this type of heat exchanger.

Air heat exchangers as finned tube heat exchangers Heat transfer between a gaseous media and a liquid Finned tube heat exchangers are often called air/water heat exchangers or gas/water heat exchangers. Heat transfer between a gas (for ex. air) and a liquid (for ex. water) takes place in the air-/water heat exchangers. To improve the thermal output transfer from the gas to the liquid, fins made of well heat transferring materials are put on the tubes. Very often air-/water heat exchangers are used as exhaust heat exchanger to gain the energy out of warm or hot exhaust fumes. Finned tube heat exchangers can also be used as air heater, air cooler or condenser.

Temperature control of gaseous and liquid media Flat tube heat exchangers are generally used as air / air or air / liquid heat exchangers. Flat tube heat exchangers are used where the (exhaust) air is polluted and the installation space is limited. In heat recovery in particular, there are numerous applications for flat tube heat exchangers as so-called exhaust gas / exhaust air heat exchangers. Little installation space and less pressure loss While the rows of tubes in smooth tube heat exchangers consist of round tubes, the rows of tubes in flat tube heat exchangers have a special profile (see illustration). This special tube profile offers advantages over the round profile in certain applications. Flat tube heat exchangers require less installation space than smooth tube heat exchangers with the same exchange area and are therefore also lighter.

Pusher plate, as cast, 300 mm wide, without air outlet slots, material: material: heat resistant steel casting 1.4823 GX40CrNiSi27-4

Pusher plate, as cast, 120 mm wide, without air outlet slots, material: material: heat resistant steel casting 1.4823 GX40CrNiSi27-4

Air cooled grate bar, as cast, 75 mm wide, Roststab, without air outlet slots, material: heat resistant steel casting 1.4777 GX130CrSi29

Air cooled grate bar, as cast, 80 mm wide, Roststab, without air outlet slots, material: heat resistant steel casting 1.4823 GX40CrNiSi27-4

Air cooled grate bar, as cast, 99,2 mm wide, Roststab, with air outlet slots, material: heat resistant steel casting 1.4777 GX130CrSi29

Air cooled grate bar, machined, 100 mm wide, Roststab, with air outlet slots, material: heat resistant steel casting 1.4823 GX40CrNiSi27-4

Air cooled grate bar, machined, 200 mm wide, Roststab, with air outlet slots, material: heat resistant steel casting 1.4823 GX40CrNiSi27-4

Air cooled grate bar, machined, 132,5 and 137,5 mm wide, Roststab, without air outlet slots, material: heat resistant steel casting 1.4823 GX40CrNiSi27-4

Air cooled grate bar, machined, 100 mm wide, Roststab, with air outlet slots, material: heat resistant steel casting 1.4823 GX40CrNiSi27-4

Power 900-1500W AC 220-240V, 50/60 Hz Adjustable Thermostat 15 °C-45 °C Tip-over switch Humidifying Function Oscillating Function Overheat protection Timer: 2-12 hours Touch screen With remote control 3D Realistic Flame Lamp Easy to handle Package includes: 1 X Heater 1 X Plastic part for flame effect 1 X Remote control 1 X Manual SKU: HV-SFH1500

Underfloor heating can be fitted in conjunction with air source heat pumps, ground source heat pumps or gas boilers. At Redfern Heat Pumps, our reliable, Gas Safe Registered heating engineers can expertly fit your underfloor heating in Plymouth and the surrounding areas in Devon and Cornwall.

Redfern Heat Pumps specialise in the installation and servicing of Air Source Heat Pumps and Ground Source Heat Pumps, in addition to ancillary components such as Hot Water Cylinders, Radiators and Underfloor Heating.

Supplying both work and leisure boats with heating and cooling solutions, Stream Marine uses Clion Marine as a primary manufacturer because of their capabilities and high success rate. Clion Marine are a Dutch climate control specialist with a well-established brand in the Netherlands. They have been developing and producing a range of climate control solutions for over 25 years. The full Clion range consists of Chillers, Self-Contained Units, Fancoils, custom made models and engine driven kits. The Clion products are specifically designed to be practical, reliable and efficient. All Clion systems are tested under extreme conditions to ensure that they are ready to withstand use in any extreme conditions they might face. Clion's full range consists of high quality, reliable and effective products that are built to last. Whether it be a leisure or commercial vessel, we are able to offer the right Clion product capable of providing you with a comfortable and controllable environment.