Air heating - Import export

Customized air-water heat exchangers for industrial use Three types of air-water heat exchangers Three different designs o air-water heat exchangers The Anthermo GmbH delivers three different designs of air-water heat exchangers: Finned tube heat exchangers Lamella heat exchangers Straight tube heat exchangers These heat exchangers are designed in a way, that inside the tube water or another liquid circulates. The air flows around outside the tubes or the fins/lamellas. The connection between the fins and the tube is used to enlarge the space for heat transfer between the liquid and the gas fluid. The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-water heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.

Customized air-air heat exchanger for the industry (up to 1.000°C) Hot outgoing air and cold incoming air Very often hot exhaust gas gets out in the environment without any use. On the other hand cold incoming air must be lead into the production process and shall be warmed. This occurs for example very often within drying technology. In this case air-air heat exchangers can be used very efficient in heat recovery. As result you have great potential to save energy expenses. Three types of air-air heat exchangers The Anthermo GmbH delivers three types of different air-air-heat exchangers: cross-flow heat exchanger straight-tube heat exchanger flat-tube heat exchanger The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-air heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.

Base Group specializes in the manufacturing of products for heating, ventilation and air conditioning (HVAC). We have been providing services in the heating, ventilation and air-conditioning sector for many years. We are manufacturer of heating structures, ventilation structures and air conditioning industry structures upon the earlier consultation with customers concerning their requirements.

How to recognize a good winter hat? Because when you enter a room you forget to take it off. It's just so comfortable that you don't even notice it's there unless you look in the mirror. PAWONEX produces such winter hats for women . One of them is the Lidia model. The cut of the hat is distinguished by the upper part, which is specially elongated to fall backwards. This type of hats is often called smurf hats and is liked by both women and men. However, design is not the only strong point of our hat. Please also pay attention to the material composition. It includes melange knitwear with the addition of refined wool. Youth winter hat with a falling back Popular smurf hats are winter hats for women that are worth wearing in autumn and winter. The cap provides sufficient "looseness" on the head. Inside the hat there is a "pillow" of air heated by the head, which is an additional insulator against the bitter cold.

Anodized aluminum is a process that enhances the durability and resistance of aluminum by creating a protective oxide layer on its surface. This layer not only prevents corrosion and wear but also allows for custom surface coloration. Here are some key points about blue anodized aluminum: Color Options: Aluminum can accept a wide spectrum of anodized colors, including blue. Other available colors include pink, black, silver, gold, green, orange, red, and purple.Anodization serves multiple purposes: Corrosion Resistance: The protective oxide layer acts as a barrier against corrosion. Aesthetics: Anodized aluminum looks sleek and reflective due to the uniform oxide layer. Scratch Resistance: The tough anodic finish increases scratch resistance. Other Qualities: Anodization also affects wear resistance, heat dissipation, and adhesion. blue anodized aluminum combines aesthetics with functionality, making it a popular choice for various applications.

A smart and eco-friendly heating solution for your home. Discover our range of advanced heat pump solutions designed to meet your specific need. Works seamlessly with PV systems to harness solar energy for even greater efficiency with R290 technology Swimming Pool Heat Pump Heating & Cooling Heat Pump including Domestic Heat Pump Water Heater Commercial Heat Pump Water Heater

R290 is a new type of environmentally friendly refrigerant, mainly used in central air conditioners, heat pump air conditioners, household air conditioners and other small refrigeration equipment.

It is mainly used to replace R22 and R502 refrigerants in low-temperature refrigeration equipment; because R290 refrigerant is flammable, it is usually only used in low-temperature refrigeration equipment with a small amount of liquid, or as a component of low-temperature mixed refrigerant; R290 is compatible with traditional refrigeration oil. High-purity R290 is used as a temperature-sensing working fluid; premium and first-grade R290 can be used as a refrigerant to replace R22, R502, compatible with the original system and lubricating oil, and used for central air conditioning, heat pump air conditioning, household air conditioning and other small refrigeration equipment . R290 is a hydrocarbon refrigerant; it has no damage to the ozone layer and has a very small greenhouse effect.

Heat transfer between a gaseous media and a liquid finned tube heat exchangers are often called air/water heat exchangers or gas/water heat exchangers. Heat transfer between a gas (for ex. air, steam) and a liquid (for ex. water, seawater, oil) takes place in the air-/water heat exchangers. Very often air/water heat exchangers are used as exhaust heat exchanger to gain the energy out of warm or hot exhaust fumes. Finned tube radiators can also be used as air heater, air cooler or condenser To improve the thermal output transfer from the gas to the liquid, fins made of well heat transferring materials are put on the tubes. The great increase of the thermal efficiency when applying fin tubes allows a substantial reduction in size and costs of such cooling equipment. The surface of such tubes is substantially increased and consequently less tubes are required compared with exchangers with plain tubes.

Air-water / air-air heat exchanger as smooth tube heat exchanger up to 1,000 ° C Smooth tube heat exchanger as an air / water heat exchanger In the case of air-water heat exchangers (also called gas-water heat exchangers), a temperature exchange takes place between a gas (usually air) and a liquid. As a rule, the liquid medium flows inside the pipes, while the gaseous medium flows around the pipes outside the pipes. Smooth tube heat exchangers can cover various areas of application: heating, cooling and condensing as well as heat recovery. Smooth tube heat exchanger as air-to-air heat exchanger Smooth tube heat exchangers are also often used as air-to-air heat exchangers. In this application, a gas (e.g. exhaust air or exhaust gases) flows inside the pipes and a gas (e.g. fresh air) outside the pipes around the pipes.

Temperature exchange between a gas and a liquid In the case of air-water heat exchangers (also called gas-water heat exchangers), there is a temperature exchange between a gas (usually air) and a liquid. Finned heat exchangers can cover various areas of application: - heating and evaporating, - cooling and condensing as well as heat recovery. In this context, lamellar heat exchangers are also called air heaters or air coolers. Air-water heat exchangers are often also used as exhaust gas heat exchangers or flue gas heat exchangers in order to recover the energy from warm or hot exhaust gases. Lamella packs for a large exchange area In order to achieve the largest possible exchange surface between the air and the medium (liquid) within the heat exchanger, lamellas or lamella packs are attached to the pipe system.

Efficient use of waste heat (up to 1.000 °C) In many production processes waste heat occurs in form of hot air which is put out to the environment without any use. Very often these hot gases are contaminated air. On the other side clean (cold) air must be warmed up for the production process. In these cases cross flow heat exchanger can reduce the energy costs. The hot air stream will be conducted in the cross or counter flow method over the cold air inside the cross flow heat exchanger. Though both air streams are strictly separated because of the construction of the heat exchanger and they don´t get mixed (leakage less than 0,5 %). Only the energy of the hot waste stream is transferred to the cold clean stream.

Temperation of fluids Pillow plates are used everywhere where liquids must be temperated. In dependence of application the liquids can be cooled or heated. Cause of this wide range of applications pillow plates are used in the process industry, in the cooling industry and in a lot of other industries. Pillow plates are also know as heat exchanger plates, evaporator plates, cooling plates /sheets and thermo plates / sheets. Pillow plates as air-/water-heat exchanger Additionally to the temperation of liquids pillow plates are also used as air-/liquid heat exchangers. In case of polluted or wasted air and if there are high demands for cleaning, more and more pillow plates are used as air-/water-heat exchanger. The large exchange surface and the good possibilities for cleaning are important features for this type of heat exchanger.

Air heat exchangers as finned tube heat exchangers Heat transfer between a gaseous media and a liquid Finned tube heat exchangers are often called air/water heat exchangers or gas/water heat exchangers. Heat transfer between a gas (for ex. air) and a liquid (for ex. water) takes place in the air-/water heat exchangers. To improve the thermal output transfer from the gas to the liquid, fins made of well heat transferring materials are put on the tubes. Very often air-/water heat exchangers are used as exhaust heat exchanger to gain the energy out of warm or hot exhaust fumes. Finned tube heat exchangers can also be used as air heater, air cooler or condenser.

What you can expect from APROVIS high-temperature heat exchangers: - Transfer to water / thermal oil / air - Abrasion protection for abrasive components in the flue gas or product gas (e.g. wood gas) - Implementation of individual solutions (e.g. with regard to available space, thermal performance) - Use of various high-temperature stainless steels according to the application in question - Own measurements on site

Open wire heating elements are the best solution for air heating when used in fans. Because of our longlasting experience in this field, we can offer you a series construction in most cases. To use our open wire or coil heating elements in air, the installation of a cut-out is necessary (heat accumulation). The connection is done by a plug at the element (Faston 4,8 or 6,3) or by a cord set. Our extended range of air heater variants comprises: -> Heaters for Laundry Dryers (series & spare parts types) -> Heaters for Cross Flow Fan -> Heaters for Powerful Radial Blowers -> Heating Crosses & Special Designs Various special designs for airflow heating, deploying heater spirals on insulating mica support, are available. They are required when the available space for installation is limited and defined geometrical air ducts do not exist. All special open wire heaters are individual designs, i.e. custom-made.

Temperature control of gaseous and liquid media Flat tube heat exchangers are generally used as air / air or air / liquid heat exchangers. Flat tube heat exchangers are used where the (exhaust) air is polluted and the installation space is limited. In heat recovery in particular, there are numerous applications for flat tube heat exchangers as so-called exhaust gas / exhaust air heat exchangers. Little installation space and less pressure loss While the rows of tubes in smooth tube heat exchangers consist of round tubes, the rows of tubes in flat tube heat exchangers have a special profile (see illustration). This special tube profile offers advantages over the round profile in certain applications. Flat tube heat exchangers require less installation space than smooth tube heat exchangers with the same exchange area and are therefore also lighter.

Design: Stainless steel. Top plate surrounded on 3 sides by railing, usable as saucers storage. Circulating air heating at rear area. Temperature individually controllable by a hooded thermostat on rearside. Temperature preset by manufacturer at 60 °C. Capacity: approx. 60 cups.

The use of energy potential at the place of its origin is optimal. Ensuring the heat transfer in the heat exchanger is thereby a vital criterion and requires customized solutions. The torrent of sewage flow in buildings is collected in a containment volume for generating energy using heat exchanger for heating and cooling. No retention volume is necessary for continuous outflows and process heating. This can be applied, for instance, in apartment buildings, residential buildings, communal buildings, hotels, thermal baths, swimming pools as well as in different energy-intensive industries, such as in foodstuffs, chemicals and pharmaceuticals.

Ex Room Heaters for heating room air in hazardous areas: - Container - Instrumentation rooms - Working rooms - Machine housings

universal usecooling, heating, clamping with bellows sealing Modular unit designcustomer taylered configuration, fast and economic cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite. For coking heat transfer oil with temperature higher than 230 °CVersion HT with diamondhard sealface and hightemperature graphitesealring solid grease ballbearingsmaintenance free no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar air heat transfer oil TEMPERATURE MAXIMUM 300 °C air heat transfer oil vacuum SPEED MAXIMUM 250 1/min DN 100 (4") 300 1/min DN 65 (2 1/2") DN 80 (3") 400 1/min DN 50 (2") SIZEDN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4")

universal usecooling, heating, clamping with bellows sealing Modular unit designcustomer taylered configuration, fast and economic cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite ballbearings (can be relubricated) no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar air heat transfer oil 10,0 bar steam 17,0 bar water TEMPERATURE MAXIMUM 190 °C air heat transfer oil nontoxic gases steam vacuum water SPEED MAXIMUM 500 1/min NPT thread 800 1/min ISO 228 thread SIZEDN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4")

the good value for money choice for all standard applications high blowing power at significantly lower noise development flexible in user applications low air consumption Heat Resistance 90° C

single inlet/outlet line or combined inlet/outlet line with stationary or rotating syphon pipe universal usecooling, heating, clamping series with ball bearings, graphite bushbearing or solid grease ballbearings bellows sealing available in stainless steel CDCartridgeDesign PRESSURE MAXIMUM 6,0 bar heat transfer oil 10,0 bar air nontoxic gases steam 17,0 bar water TEMPERATURE MAXIMUM 300 °C air heat transfer oil nontoxic gases steam vacuum water SPEED MAXIMUM 600 1/min DN 80 (3") DN 100 (4") DN 125 (5") SIZEDN 80 (3") DN 100 (4") DN 125 (5")

Electrical air heaters for air or process gas heating in pressureless systems: ·         Ventilation systems, Ex HVAC plants ·         Supply air heaters for machines ·         Heating of process gases ·         Heating of containers or heating chambers ATEX, IECEx, TR-CU and other international certificates

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.