Sealed connectors - Import export

With increasing demands on the efficiency in agriculture, precision farming is becoming more and more important. Precision farming stands for the targeted management of utilized agricultural land, e.g. the individual application of fertilizers and plant protection products depending on the position of the utilized land. To ensure the necessary communication between tractor, equipment and agricultural management software, the non-proprietary ISOBUS is used. ISOBUS is specified in standard ISO 11783-2 and describes the BUS including the connectors used with it. To extend the CONEC product range in the field of connection solutions for agricultural and construction machinery, the connectors for ISOBUS are included in the ready-made and overmoulded design. The overmoulded ISOBUS-series is available as male and female version. The contact carrier has the 9-pin contact image required by the standard.

Special applications have special requirements for connectors. For this field of application, CONEC developed water-tight D-SUB connectors with rating IP67. Owing to special sealing measures at the connector and the sealing frame, the high requirements are met. These connectors are used where dust and spray water occur and functioning of usual connectors would be negatively affected. These connectors are available as standard or high density in the usual pole number.

Data communication is also required in outdoor applications. Whether in traffic engineering, in maritime environments or mobile phone applications, long transmission distances and impacts such as heat, rain, snow, salty mist and dust place high demands on all connectors. The IP67 connectors developed by CONEC provide reliable protection against environmental influences and mechanical stress. The broad portfolio includes RJ45, USB/Mini USB and Fibre Optic LC Duplex connectors in plastic, metalized plastic or full metal.

Whether tractors, excavators or construction machines, the segment IVCM (Industrial Vehicles and Construction Machines) places high demands on the valve connectors used.

Connector systems able to meet special demands are needed for industrial use in harsh environments. The water resistant connector system developed by CONEC is intended for applications where dust and water are factors. Corresponding accessories, such as water resistant hoods and protective caps are available. CONEC Solid Body and CONEC SlimCon D-SUB connector series were a consequent development to establish a D-SUB connector familiy which is especially designed for application in harsh industrial environment. The one piece body - made of zinc diecast - provides outstanding mechanical robustness and protection against splash water and dust under aggressive conditions.

Connectors for use in agricultural, construction or municipal technology are often exposed to extreme loads. The overmoulded versions of the AT, ATM, DT, connector series developed by CONEC fulfil at least protection class IP67 (DT connectors even IP67/IP69K). CONEC connectors for use in agricultural, construction and municipal technology therefore guarantee trouble-free operation even in the most difficult applications, such as underground, at sub-zero temperatures or in dusty, hot environments.

Superbright bipolar red, yellow and green LEDs assemblies with resitor for 120VAC or 240VAC. Plastic housing or rugged screw on metal housing-all available with IP66 sealing. Custom wire leads,plug, connectors options available by verco electromechanical components. mounting holes 7,93 mm or 12,70 mm

NSPV Dust cap for solar connectors L03002-001/002 types Features: EPDM insulation material; Flame class for UL94-V0; Used to protect electrical system from dust during panel disconnect; Fits for MC4 connectors.

NSPV Dust cap for solar connectors L03001-001/002 types Features: EPDM insulation material; Flame class for UL94-V0; Used to protect electrical system from dust during panel disconnect; Fits for PV4.0 solar connectors.

Merefields Supply a very wide range of DELPHI Components, please send email to liamm@merefields.com for a Quote. We have over 10 Million Lines of Components in our Supply!

We have over 10 Million Lines of Components in our Supply. We Supply the FULL Range of Bosch Parts Contact me on liamm@merefields.com

Merefields Supply a very wide range of HIROSE PARTS, please send email to liamm@merefields.com for a Quote. We have over 10 Million Lines of Components in our Supply!

Merefields Supply a very wide range of HIRSCHMANN PARTS, please send email to liamm@merefields.com for a Quote. We have over 10 Million Lines of Components in our Supply!

WE SUPPLY A WIDE RANGE OF MOLEX PARTS WE HAVE OVER 10MILLION LINES OF COMPONENTS IN OUR SUPPLY. PLEASE SEND liamm@merefields.com FOR QUOTE REQUESTS

We Supply a very wide Range of Lear Parts. We have over 10Millions Lines of Components in our Supply. Please Contact liamm@merefields.com for Quotes.

This mass production technology allows to produce cost efficiently precise parts made by injection molding of silicone LSR, meeting the highest requirements. LSR parts are used in many demanding industries: automotive, electronics, food, medical, packaging, etc. For silicone Automotive Connector Seals read more here.

Whenever pre-assembled cables need to be led into a housing, the cable entry system KADL is the perfect solution. KADL is installed with one click - easy and timesaving. The modular structure allows a step-by-step installation of 3 to 25 cables. With 16 different grommets a wide clamping range from 3 to 32,5 mm can be covered. - For applications where you need to insert and seal pre-assembled cables with connectors into housings - Tool-free entry and connecting technology for machines and equipment - Temperature range -30 °C to +100 °C - Protection grade IP65 - UL 514B - 12 different frame combinations with 16 sizes of grommets (accessory) - Click-in assembly at wall thickness from 1,5 - 2,0mm - For walls with thickness larger 2,0 mm the KADL can be fixed with standard screws

CONEC Combination D-SUB Connectors with IP67-rating are suitable for use in environments where increased protection against moisture and contamination is necessary. All IP67 protected Combination D-SUB Connectors are supplied already populated with signal, high voltage, high power or coaxial contacts. This is necessary to provide factory assurance that the connector is properly sealed thus ensuring its reliable protection in harsh environments. The type of protection is defined by IEC 60529 which also specifies the suitability of electrical components for various ambient conditions. CONEC water resistant connectors ensure a continuously secure connection compliant with the IP67 rating. They are dustproof and protected against temporary submersion into water.

Parker Hannifin is the world leader in the development, production and marketing of components, systems and solutions in the field of control and motion. Parker supplies products in 9 technologies : hydraulics, pneumatics, electromechanics, filtration, process control, connectors, sealing, air conditioning and aerospace . ​ With a large distribution network around the world, you can rest assured that you can find a Parker distributor near you who can provide technical support, meet your needs and provide troubleshooting and maintenance.

Thanks to many different kinds of lighting characteristics, MACH LED PLUS.forty supports a variety of visual tasks, even if sometimes space is limited. With an outer diameter of 40 mm and a minimum length of 190 mm, MACH LED PLUS.forty enables high illuminance even in the most restricted space. • Maintenance-free LED technology • Ultra low-glare, homogeneous light with soft transitions • With narrow- or wide-beam illumination characteristic, as desired • Outer diameter of 40 mm for integration in case of restricted space • Robust aluminium housing with solid safety glass screen • Side parts made of high-performance plastic • Potted M12 connector • Viton® seal for high degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Insensitive to shocks and vibrations • Ideal for high mechanical and thermal stress • Direct connection to machine voltage • Luminaires for daisy chaining

The MACH LED PLUS.seventy ensures a wide-area illumination both as a replacement for classic tube luminaires or for initial equipping of machines. With a diameter of 70 mm, long versions ranging from 370 mm to 1 070 mm and the connection option to 24 V or 100 / 120 / 220 – 240 V, the MACH LED PLUS.seventy is the optimum solution to convert machines and production facilities from classic tube luminaires to modern LED lighting technology. • Ultra low-glare, homogeneous light with soft transitions • Outer diameter of 70 mm for easy replacement of traditional tube luminaires • Robust aluminium housing with solid safety glass screen • Side parts made of high-performance plastic • Potted M12 connector • Viton® seal for high degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Insensitive to shocks and vibrations • Ideal for high mechanical and thermal stress • Connection to machine or mains voltage • Luminaires for daisy chaining

starlim//sterner is a recognized partner for the automotive industry and supplies OEMs with silicone and compound parts. There is no longer any car on the road without a starlim//sterner product. Most of the times it is hidden away under the motor hood and is present in plug connectors as sealant. Without such starlim//sterner products the car would be subjected to electrical shortages. Moisture would enter inside and incapacitate the vehicle. Production of silicone and multi-material parts for the automotive industry. For the auto-industry we produce amongst other things Sealing mats and collector seals Seals for plug connectors Highly transparent lenses Radial seals Single strand seals O-rings Protective tubes for spark plugs Steering wheel switches with finished surfaces Various customized solutions

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FKM - Material: AL, seawater-proof - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range 0 to 232 psi (0 to 16 bar)

- Whitworth pipe thread- VS seal rings - Seals in connectors NBR - Material brass nickel-plated - Temperature range -4 to 158 °F (-20 to +70 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

— Material Al natural anodized, brass nickel-plated — Sealing FPM — Plug connectors Series 15 (release ring) — without shut-off — Can be assembled as bulkhead — Temperature range -20 to +120 °C (-4 to 248 °F) — Working pressure range -0.95 to 16 bar (-14 to 232 psi) — for compressed air

The firm flexible tube or plastic pipe is pushed onto the integrated connecting sleeve of the 1C connector. The sealing ring forms a tightness for the connection, while it is secured in place by a cutting ring. Due to the knurled nut, this also affects the flexible tube. The cutting ring wedges into the flexible tube or pipe as far as the knurled nut is screwed onto the connector body. A shear force is applied here that intensifies the contact pressure. This creates a friction-locked and tight connection that can be released at any time and minimises the dead volume.

A flexible dual wall, radiation cross linked tubing used for insulating, jacketing and bundling of wire harnesses and components. Ideal for sealing connector to cable transitions and similar moisture proofing applications. Made from flame retardant polyolefin, MIL and UL rated*, it offers a good balance of sealing and protection against fluids on transitions to connectors. Shrink Ratio 3 1 or 4 1 Operating Temperature Range 55°C to 125°C

The pipe or tube of the 2D pipe connector is inserted through the connector as required for bead tubes, immersion tubes, thermometers or sensors, etc. The pipe is placed against the inner edge of the connector and a sealing ring seals off the connection. A cutting ring wedges into the flexible tube or pipe as far as the knurled nut is screwed onto the connector body, thereby fixing the connection in place.