Sealed connectors - Import export

Special applications have special requirements for connectors. For this field of application, CONEC developed water-tight D-SUB connectors with rating IP67. Owing to special sealing measures at the connector and the sealing frame, the high requirements are met. These connectors are used where dust and spray water occur and functioning of usual connectors would be negatively affected. These connectors are available as standard or high density in the usual pole number.

Data communication is also required in outdoor applications. Whether in traffic engineering, in maritime environments or mobile phone applications, long transmission distances and impacts such as heat, rain, snow, salty mist and dust place high demands on all connectors. The IP67 connectors developed by CONEC provide reliable protection against environmental influences and mechanical stress. The broad portfolio includes RJ45, USB/Mini USB and Fibre Optic LC Duplex connectors in plastic, metalized plastic or full metal.

Whether tractors, excavators or construction machines, the segment IVCM (Industrial Vehicles and Construction Machines) places high demands on the valve connectors used.

Connectors for use in agricultural, construction or municipal technology are often exposed to extreme loads. The overmoulded versions of the AT, ATM, DT, connector series developed by CONEC fulfil at least protection class IP67 (DT connectors even IP67/IP69K). CONEC connectors for use in agricultural, construction and municipal technology therefore guarantee trouble-free operation even in the most difficult applications, such as underground, at sub-zero temperatures or in dusty, hot environments.

With increasing demands on the efficiency in agriculture, precision farming is becoming more and more important. Precision farming stands for the targeted management of utilized agricultural land, e.g. the individual application of fertilizers and plant protection products depending on the position of the utilized land. To ensure the necessary communication between tractor, equipment and agricultural management software, the non-proprietary ISOBUS is used. ISOBUS is specified in standard ISO 11783-2 and describes the BUS including the connectors used with it. To extend the CONEC product range in the field of connection solutions for agricultural and construction machinery, the connectors for ISOBUS are included in the ready-made and overmoulded design. The overmoulded ISOBUS-series is available as male and female version. The contact carrier has the 9-pin contact image required by the standard.

Connector systems able to meet special demands are needed for industrial use in harsh environments. The water resistant connector system developed by CONEC is intended for applications where dust and water are factors. Corresponding accessories, such as water resistant hoods and protective caps are available. CONEC Solid Body and CONEC SlimCon D-SUB connector series were a consequent development to establish a D-SUB connector familiy which is especially designed for application in harsh industrial environment. The one piece body - made of zinc diecast - provides outstanding mechanical robustness and protection against splash water and dust under aggressive conditions.

Whenever pre-assembled cables need to be led into a housing, the cable entry system KADL is the perfect solution. KADL is installed with one click - easy and timesaving. The modular structure allows a step-by-step installation of 3 to 25 cables. With 16 different grommets a wide clamping range from 3 to 32,5 mm can be covered. - For applications where you need to insert and seal pre-assembled cables with connectors into housings - Tool-free entry and connecting technology for machines and equipment - Temperature range -30 °C to +100 °C - Protection grade IP65 - UL 514B - 12 different frame combinations with 16 sizes of grommets (accessory) - Click-in assembly at wall thickness from 1,5 - 2,0mm - For walls with thickness larger 2,0 mm the KADL can be fixed with standard screws

The IP67 D-SUB SlimCon series are supplements to the IP67 D-SUB connector family. The CONEC SlimCon series has a very compact design of IP67 sealed D-SUB connectors with a one-piece zinc die-cast shell. The panel cut-out for the CONEC SlimCon series corresponds to the standard of other D-SUB connectors and thus no new cut-outs are required and refitting from standard IP20 systems to the new IP67 system of the CONEC SlimCon series is possible. The one-piece zinc die-cast shell makes the new CONEC SlimCon D-SUB connector a mechanically extremely robust interface with reliable IP67 protection – similar to the CONEC Solid Body series. However, due to its design, a reduction of the occupied space from 48% to 52 % compared to a standard IP67 protected connector can be achieved. Owing to its compact design and the one-piece zinc die-cast shell, the CONEC SlimCon series is ideal for industrial and harsh environments.

CONEC Combination D-SUB Connectors with IP67-rating are suitable for use in environments where increased protection against moisture and contamination is necessary. All IP67 protected Combination D-SUB Connectors are supplied already populated with signal, high voltage, high power or coaxial contacts. This is necessary to provide factory assurance that the connector is properly sealed thus ensuring its reliable protection in harsh environments. The type of protection is defined by IEC 60529 which also specifies the suitability of electrical components for various ambient conditions. CONEC water resistant connectors ensure a continuously secure connection compliant with the IP67 rating. They are dustproof and protected against temporary submersion into water.

Thanks to many different kinds of lighting characteristics, MACH LED PLUS.forty supports a variety of visual tasks, even if sometimes space is limited. With an outer diameter of 40 mm and a minimum length of 190 mm, MACH LED PLUS.forty enables high illuminance even in the most restricted space. • Maintenance-free LED technology • Ultra low-glare, homogeneous light with soft transitions • With narrow- or wide-beam illumination characteristic, as desired • Outer diameter of 40 mm for integration in case of restricted space • Robust aluminium housing with solid safety glass screen • Side parts made of high-performance plastic • Potted M12 connector • Viton® seal for high degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Insensitive to shocks and vibrations • Ideal for high mechanical and thermal stress • Direct connection to machine voltage • Luminaires for daisy chaining

The MACH LED PLUS.seventy ensures a wide-area illumination both as a replacement for classic tube luminaires or for initial equipping of machines. With a diameter of 70 mm, long versions ranging from 370 mm to 1 070 mm and the connection option to 24 V or 100 / 120 / 220 – 240 V, the MACH LED PLUS.seventy is the optimum solution to convert machines and production facilities from classic tube luminaires to modern LED lighting technology. • Ultra low-glare, homogeneous light with soft transitions • Outer diameter of 70 mm for easy replacement of traditional tube luminaires • Robust aluminium housing with solid safety glass screen • Side parts made of high-performance plastic • Potted M12 connector • Viton® seal for high degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Insensitive to shocks and vibrations • Ideal for high mechanical and thermal stress • Connection to machine or mains voltage • Luminaires for daisy chaining

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FKM - Material: AL, seawater-proof - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range 0 to 232 psi (0 to 16 bar)

- Whitworth pipe thread- VS seal rings - Seals in connectors NBR - Material brass nickel-plated - Temperature range -4 to 158 °F (-20 to +70 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

— Material Al natural anodized, brass nickel-plated — Sealing FPM — Plug connectors Series 15 (release ring) — without shut-off — Can be assembled as bulkhead — Temperature range -20 to +120 °C (-4 to 248 °F) — Working pressure range -0.95 to 16 bar (-14 to 232 psi) — for compressed air

The firm flexible tube or plastic pipe is pushed onto the integrated connecting sleeve of the 1C connector. The sealing ring forms a tightness for the connection, while it is secured in place by a cutting ring. Due to the knurled nut, this also affects the flexible tube. The cutting ring wedges into the flexible tube or pipe as far as the knurled nut is screwed onto the connector body. A shear force is applied here that intensifies the contact pressure. This creates a friction-locked and tight connection that can be released at any time and minimises the dead volume.

For the 2N pipe connector, the pipe is placed against the inner edge of the connector and a sealing ring seals off the connection. A cutting ring wedges into the flexible tube or pipe as far as the knurled nut is screwed onto the connector body, thereby fixing the connection in place. This creates a friction-locked and tight pipe connection that can be released at any time, that eliminates dead volume in the design concept and also has no effect on the flow. The inside diameter of the connector does not correspond to the inside diameter of the pipe.

Dryflex CS is a range of thermoplastic elastomer (TPE) compounds, based on SEBS. The range has been engineered to deliver optimised compression set performance. The raw materials used to manufacture Dryflex CS compounds are compliant with major food contact regulations (food contact statements available on request). The compounds also offer excellent organoleptic performance. What is Compression Set? Compression set is the measure of permanent deformation remaining when an applied force is removed. A TPE sample is compressed to a specific deformation, for a specified time and at a specific temperature. The compression set value is the percentage of the sample that fails to recover to its original height and is an important performance indicator for applications such as seals, flexible connectors and gaskets. For a 40 shore A hardness TPE, typical compression set values are 65 to 70 percent, with the Dryflex CS range this is reduced to 40 percent (22 hours at 100 degree). Key Chara

BEULCO gate valves enable safe shut-off of parts of the pipeline network or a system. The slides are designed so that spindle overruns and spindle breaks are not possible. The gate valve is equipped with connectors on both sides. The BEULCONNECT connector is designed to clamp the pipe with a material-saving plug-in technology. The connector is lifelong sealed and guarantees the installer a trouble-free and stress-free installation even under difficult installation conditions. The connector guarantees special security: The tube only has to be plugged in - a check, whether z. B. a pressure nut is properly tightened, is eliminated.

Blade Terminals, Blade Receptables/ Connectors, Pin Headers/ Jumpers, Terminal Strips Since 1964 the innovative family business Ettinger GmbH has been your dependable partner for electronic and mechanical components. Customers benefit from our wide one-stop product range, excellent stock availability and reliable delivery.