Screw rivets - Import export

Screw Rivet ideal for panel fastening. Possibility to disassemble

For a fast and strong connection. Same assembly as for push rivets; can, however, be removed like a screw for maintenace purposes and also be reused. Variable rivet thickness absorbs vibrations. Material: PA 6.6 Colours: without last digits = black last digits 000 = natural Further types on written request.

Series RH600 Twist-Lok™ Pins replace costly screw machined pins and eliminate problematic installation of screws and rivets. The helical knurl minimises stress during installation by rotating as it engages the hinge. Corrosion-resistant material and a rounded burr-free head improve installed appearance. Axial and radial forces induced in the hinge eliminate the tendency for the pin to creep and maintain hinge tension.

Latches with draw bail for securing and locking hatches, container lids, machine cladding etc. By exceeding the dead centre they resist vibration. The locking force is applied by drawing on the bail. The latches can be screwed down or riveted. We recommend using countersunk screws for fastening the components. Order catch plates separately.

Install impact protection For screwing and riveting secutex impact protection with an internal perforated plate can be screwed or riveted in different ways. You can achieve universal impact protection in no time at all. For welding Welding is often the easiest and fastest way of fastening. The various protruding perforated sheet designs allow a very versatile use. For gluing If screwing or welding is not possible, the impact protection can be glued with the secutex special adhesive. Cutting and sawing The secutex material can be sawed with a conventional band saw. The material tries to avoid the cutting tool. Make sure that the wedge angle is as small as possible and adjust the cutting speed if necessary. Milling Use commercially available milling cutters with a small number of teeth. Circumferential speed approx. 200400 m / min, clearance angle ∂ 10 °, clamping angle y 25 °. The use of a drilling emulsion is recommended for cooling and surface optimization. Rotate

Dimensions Depending on the required stamp power (material strength, material thickness, and part shape) Material All spring materials in soft and hard condition as well as quality steels with lower strengths and aluminum alloy and also special alloy Stainless steel up to 1900 N/m² Rubber-coated strip material Hardening Through external services Coating Fully or partly coated strip material In-house phosphating In-house stove-enameling Additional coatings through external services Specialities Fully automated manufacturing of components and mounting Fully automated welding Contact springs with contact rivet Bushes clinched, welded, and open Special processing like thread cutting, screw mounting, and rivets feasible Special packaging in blister pack, trays or magazines Rapid prototyping

As a combination of blind rivet nut and screw, blind rivet nut studs offer an alternative or replacement for welding studs. The following applications are particularly suitable for the use of GESIPA® blind rivet nut studs: • Accessibility from one side only • Thin carrier materials (sheet metal, plastics, etc.) • Necessary pre-centering • On heat sensitive application materials (e.g. welding not possible) • Surface coatings must not be damaged • Production of electrically conductive joints • Fast replacement of welding studs (repairs) GESIPA® blind rivet nut studs can be set without any problem with the GESIPA® blind rivet nut setting tools FireBird®, GBM 95 and FireFox® using corresponding adapters (see tool description) for blind rivet nut studs

RIFBOLT blind rivet studs consist of a sleeve and a screw, which are joined together by welding or crimping. As special production components we can use different lenghts and types of screws can be used as well as almost every rivet nut sleeve. Blind rivet studs offer a multiple use. They can — connect different working pieces, — install a thread into components and — fix additional parts to the screw.

Characteristic Features : Can read high-hardness easily compared to 7010. High fatigue strength, including in adhesive, rivet, screws is suggested, using with protectors in outer environments is suggested. Warnings : Be careful while selecting heat treating Product Shapes: plate, bar, roll, pipe, wire, profile types

• Screws/Bushing and Inserts for automobile cam covers and other plastic modules • Rivet Nuts and Bolts, Threaded Inserts for fixing sheet metal • Automotive Turned Parts

At Steeling Industries, we specialize in the production of high-quality fasteners. Our extensive range includes a variety of fasteners such as nuts, bolts, bushings, rivets, screws, and washers. Whether you are in need of standard or custom fasteners, we have the capabilities to meet your requirements. Contact Us for a Quote If you are interested in our fasteners, we invite you to get in touch with our sales team. Simply send an email to sales@steeling.net and one of our representatives will be happy to assist you. Please provide us with your specific requirements, including the type and quantity of fasteners you need, so that we can provide you with an accurate quote. At Steeling Industries, we are committed to delivering fasteners of the highest quality. Contact us today to discuss your fastener needs and let us help you find the perfect solution for your application.

Discover the world of stainless steel wire from Vom Hofe Kaltstauchdraht GmbH - your excellent source for wire solutions that combine robustness with timeless elegance. Our stainless steel wire stands for outstanding performance, precision and the many years of expertise of a pioneer in the wire business. Robust elegance for demanding applications: Our stainless steel wire combines robust construction with timeless elegance and is the ideal choice for a wide range of demanding applications. Whether in the manufacture of screws, nuts, rivets, cold-formed parts or in the automotive industry - our stainless steel wire impresses with its versatility.

CHARACTERISTICS: This platform model is specially designed for the use on works which require a worker to remain in a higher level for a longer period of time Slip-resistant plate top cap Superior platform with 40mmx50mm and equipped with frontal guardrails PVC slip-resistant feet Top cap with tool holder Handrail on both sides 2 Wheels and 2 supports to facilitate handling Comfortable slip-resistant steps Welded steps (no rivets or screws) Available on the versions of 6 to 14 steps TECHNICAL SPECIFICATIONS: Profile Front 78mm / Back 65x25mm Slip-resistant step with 85mm WARRANTY: 2 Years USE: Professional and Industrial

CHARACTERISTICS: Slip-resistant plate top cap PVC slip-resistant feet Top cap with tool holder Wider steps, providing higher comfort Welded steps (no rivets or screws) Anti-splay safety belts on the versions from 4 to 9 steps Available on the versions of 4 to 9 steps TECHNICAL SPECIFICATIONS: Profile Front 61mm / Back 40x20mm Slip-resistant step with 120mm WARRANTY: 2 Years USE: Professional and Industrial

Steelsorba is a high specification acoustic solution for sound absorbing industrial panel for walls and ceiling linings. It is designed to reduce the problem of noise reverberation. Steelsorba panels are a sound absorbing material resistant to mild impact and are simple and quick to install. All component parts of the system can be modified at installation to suit. Suitable areas for treatment are factories, workshops, plant rooms, test bays and other industrial environments. Acoustic Performance Installation Walls Odd leg U channels are plugged and screwed to the wall. Insert the panel into top channel and push panel flush to wall then lower into bottom channel. Use bottom channels vertically as capping to cut wall ends. Ceilings Odd leg U channels are plugged and screwed to the soffit. Insert the panel into top channel and push panel flush to soffit then slide into bottom channel. Use bottom channels as capping to cut ends. Use pop-rivets or screws to hold panels at ends as...

Plastic ball bearing featuring a polyacetal (POM) outer race, and steel inner race. Its main applications are: office furniture, furniture, vending machines, and refrigerators. There are 3 different types of D-Series Bearings, each serving a different use of application: Hole, Screw, and Riveting bearings. In addition, there are 6 different types of outer housing shapes, which can be seen below. Dimensions range from φ9 to φ48, and load capacity ranges from 2kgf (4.40 lb) to 20kgf (44.0lb).

The product portfolio at SIM Automation ranges from the effective design of individual manual workstations all the way through to completely interlinked, highly automated process lines. We handle all common transfer systems and can thus offer solutions that are independent from the branches of our customers. In addition to all standardized joining, measuring, testing and inspection systems, our assembly plants can also implement the customer’s own processes, including: - Joining, screwing, bonding, riveting, welding (laser, ultrasonic, resistance) - Testing, measuring, inspecting (optical, tactile, electrical, thermal) - Robot systems - Linear systems (pneumatic, electrical, mechanical) - Cam-controlled drives, linear and handling systems Testing and inspection lines we have been involved in: - Electric high-performance gear components (up to 6 kV) - Electric central locking systems (vehicles)

Magnetic separators filter ferrous and paramagnetic metals from product flows. These contaminations can remain in your end product and cause rejection, but can also damage your process machines. Examples of ferrous contamination in your production line: rivets, nails and screws of packaging, loosened bolts and nuts, wear of moving parts, rust or corrosion. We offer you a wide range of magnetic separation systems, that are suitable for removing large loosened parts, up to very fine wear particles. And with manually to fully automatic cleaning systems.

Magnetic separators filter ferrous and weakly magnetic metals from your product flow. These contaminants can remain in your end product and cause rejection, but can also damage your process machines. Examples of ferrous metals in your production line: rivets, nails and screws of packaging, loosened bolts and nuts, wear of moving parts, rust or corrosion. We offer you a wide range of magnetic separation systems, that are suitable for removing large loosened parts, up to very fine wear particles. And with manually to fully automatic cleaning systems.

Even highly sophisticated inventions are often held together by standard parts. Without them, many machines would not work. This is why Bossard offers the full range of screws, nuts, rivets, washers, bolts, pins and electrical fasteners from stock. Choose your fasteners and fixings from the catalog groups. Clicking takes you to the e-Shop, where you will find more detailed product information.

When the use of formwork with integrated gangway proves impossible. This vertical metal formwork has a multitude of interests which make it a first-rate product: Its metallic structure is solid and allows it to withstand high stresses in terms of re-concreting. Its plywood in PVC or metal wood allow it to have a good quality rendering during the formwork removal of concrete . Its maintenance is simple , it is easily cleaned with a high pressure cleaner. Its lifespan is high because the structure does not wear out very much and can be easily repainted after a few years of use. The formwork skin which is screwed or riveted is easily changed. Our selection of Modular Formwork Construction and civil engineering / innovative formwork and benefiting from unbeatable prices thanks to high production volumes Module 3.00mx 2.00m Metal chassis, 4 holes.

STANDARDS TS EN 10218 QUALITY & RAW MATERIAL STANDARDS TS 2348, DIN EN 10016 (SAE 1006-1008-1010, CQ15, ST37,QST 36,20MnB4) DIN EN 10216, DIN EN10217, DIN EN 17223, DIN EN 10025, DIN EN 10263-2, DIN EN 10263-3, DIN EN 10263-4… DIAMETERS Ø 0,70 mm - Ø 30,00 mm PACKAGING 50 kg to 150 kg coils, 1000 kg basket and 500 to 1000 kg Z2 - Z3, 1500 kg Z4 TENSILE STRENGTH 500 - 1000 N/mm2 SURFACE QUALITY clean surfaces painting applications for better coating of PVC and powder according to customer requirements AREAS OF USAGE White goods, automotive sector, screw, nuts, rivets, nails, dowel screws and fasteners

Aluminum and aluminum alloy Mono Wire diameters: 0.12mm - 9.5mm (.0047'' - .3800") Aluminum and aluminum alloy Multi Wire diameters: 0.12mm - 0.50mm (.0047'' - .2000'') TELMAKSAN is delivering the best quality of aluminum wires to increase the quality of customers products. Field of application includes coaxial cables, flexible cable, data cables and armor for any kind of cables Applications: COAXIAL CABLES, METALLIZATION, DATA CABLES, ARMOUR FOR CABLES, RIVET AND SCREWS, FOODSTUFF CLIPS