Screw covers - Import export

Self-adhesive round hole covers made of self-adhesive plastic foil according to individual PANTONE, RAL or CMYK colour code with a diameter of 10 mm, 15 mm, 20 mm, 25 mm, 50 mm or custom sizes. 500 pieces minium order.

Body, cover, rotor, screws and bolts of the body: 316 stainless steel Vanes: PTFE Waterproofing: Teflon-coated braid Handle: zinc-plated steel

Screw-on closure with tamper-evident ring for compact jerrycan. Screw-on cover made of PP, seal made of PE, thread DIN50. The closure offers protection against tampering and a guaratee that the container has not been opened before, since the snap ring is visibly broken the first time the container is opened.

With the K 4000 Cut-n-Break, you can cut up to 400 mm from one side. It is suitable for flush cutting close to walls and floors as well as for smaller jobs such as window openings. The power cord is routed under the handle, ensuring durability and uninterrupted operation. The one-piece inspection cover and Torx screws make both assembly and maintenance easier

Load capacity: 15 kN test load EN 124. Material: Frame made of aluminium extruded sections. Cover made of 3/5 mm aluminium chequerplate. Aluminium reinforcement to the underside. Stainless steel screws. Features: Sealed cover. EPDM seal. Completely rust-proof. Light weight. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly where corrosion-resistance and/or low weight are of great advantage. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Installation height ≈ 3.5 cm Total height including reinforcement of bottom ≈ 7 cm Special sizes possible *S = available from stock *O = to order

Recommended applications: The HAGOlifter is most suitable for HAGO manhole covers without hinge. With this convenient lifter the lifting of manhole covers becomes child's play. Even heavy covers can be lifted and moved to the side by just one person and without any particular efforts. Scope of delivery: The HAGOlifter is delivered as a complete set consisting of: 2 pcs. Lifting unit (painted red) with aluminium wheels and rubber tyres 2 pcs. Fixing screws M10 (for HAGO manhole covers made of aluminium) 2 pcs. Fixing screws M12 (for HAGO manhole covers made of galvanized and stainless steel) 2 pcs. Rubber protection plates (to place on sensitive floors) Also available in special design HAGOlifter HL-31 XH (extra high) with extended lifting height (31 cm). The design HL-31 XH is only required for the manhole cover BV(E)HS 400/110 (concerns only size 100 x 100 cm) or for the particularly high HAGO special covers.

LOAD CAPACITY: 125 kN test load EN 124. MATERIAL: Frame and cover sections in extruded aluminium. Stainless steel screws. FEATURES: Sealed access cover in high-quality finish. Very attractive surface, the visible edges are particularly attractive. Therefore these covers are particularly suitable where a look of elegance is required. Very easy-to-open design. Robust corner joints guarantee a very high degree of rigidity and make it easier to lay tiles and ceramic finishes. EPDM seal. The cover is reinforced with a clamped steel mesh reinforcement. THE LIFT-OFF OPENING SYSTEM: Every HAGODECK Type BVA alu cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. APPLICATIONS: Inside buildings where it is important to obtain a nice visual effect. Also, in places where floor finishes may need polishing after fixing or where particular attention needs to be given to corrosion...

The profiled guide slide PFS is available in 5 series with sizes from 100 mm up to 425 mm width and strokes up to 2000 mm. To protect them against dirt accumulations, the slides are covered with bellow covers. Other covers on request. The slides are available in aluminium (nature anodized), or casted iron GGK-25. Optional steel C-45. The ball thread spindle drives are available in the qualities T5 and T7 with spindle pitches from 5 to 50 mm. PFS (basic equipment) ball screw spindle acc. to standard type allocation screwed up bellows cover coated on both sides integrated inductive limit switches (PNP break contact) incl. plug-connector in the endplate

NSPV Weather Protected AC Isolating Switches The IP66 Weatherprotected Isolating Switches is a robust range of switches suitable for virtually any external application. Fixed Earth and Neutral connector bars with dual clamping screws per tunnel provide equal stripping lengths and secureclamping for all cables. Terminal bore size is 5 x 6.6mm. Included in the range are 1,2, 3 and 4 pole switches from 20 to 80 Amps. And the colour include white and grey.The basemounted mechanism provides for easier termination and more wiring room. Switch dimensions are 165mm x 82mm with anoverall height of 85mm. A safety feature for mounting switches to metal structures is the insulating caps that cover base mounting screws to totallyprotect them from any live cables. Dual 25mm screwed conduit entries top and bottom (up to 55 amp.) allows four ways to surface wire the switch. 55 amp.and above are also available with 32mm entries top and bottom.

Special purpose External type Rack cabinets, Galvanized sheet body up to 3mm Body reinforced with special twists 19” Rack Carrier Frame, Doors reinforced with internal insulation materials, Heat and sound insulated covers and panels, High Protection class up to IP66 Driven Screw-Nut (PEM Fastening) Applications Covers that cannot be removed from the outside, Reinforced sabotage and vandalism-proof lock solution Special air conditioning and ventilation solutions, Panel heater options for cold environments, Internal Battery Rack option Zinc coating Solutions against Rust and Oxidation Primer Painting for External Type applications, Epoxy-Polyester Powder Paint suitable for outdoor use, Flexible cabling and Bus-Bar solutions Project-based production in special sizes

Pneumatic cylinder double acting Guided by 2 rods on ball bushings or bronze bearings Elastic damping at end of stroke Magnetic piston and Tgroove for sensor Robust and precise compact cylinder with guide Long and precise guidance because even for very short strokes, guidance is ensured by 4 bronze bearings or 4 ball bushings as the shortest body is the 50 mm stroke for lower strokes, a stroke limiting ring is placed in the cylinder. This guidance avoids the problems of buttressing, regularly encountered with ultrashort guides. These pneumatic cylinders are robust and reliable, even at high speed thanks to screwed cylinder’s covers (no circlips) an hardanodized body at 35 μ a thick front plate allowing a long centering of the rods for a better resistance to torsion Guided cylinder for universal detector The 5 / 6.5 mm Tslots allow the use of the majority of brands of magnetic detectors on the market. Stroke adjustment on compact guided cylinder

DIM Ltd. - PACIFIC Furniture Equipment Products Screw Cover Caps Wood Grain Colours Color chart Ø 18mm Stopper Materyal: Pvc Kalınlık: 0,25mm *The material is laminated to silicone coated paper by using Hot-Melt glue.

DIM Ltd. - PACIFIC Furniture Equipment Products Screw Cover Caps High Gloss Colours Color chart Ø 18mm Stopper Materyal: Pvc Kalınlık: 0,25mm *The material is laminated to silicone coated paper by using Hot-Melt glue.

DIM Ltd. - PACIFIC Furniture Equipment Products Screw Cover Caps High Gloss Colours Color chart Ø 14mm Stopper Materyal: Pvc Kalınlık: 0,25mm *The material is laminated to silicone coated paper by using Hot-Melt glue.

DIM Ltd. - PACIFIC Furniture Equipment Products Screw Cover Caps Wood Grain Colours Color chart Ø 14mm Stopper Materyal: Pvc Kalınlık: 0,25mm *The material is laminated to silicone coated paper by using Hot-Melt glue.

DIM Ltd. - PACIFIC Furniture Equipment Products Screw Cover Caps Solid Colours Color chart Ø 18mm Stopper Materyal: Pvc Kalınlık: 0,25mm *The material is laminated to silicone coated paper by using Hot-Melt glue.

DIM Ltd. - PACIFIC Furniture Equipment Products Screw Cover Caps Solid Colours Color chart Ø 14mm Stopper Materyal: Pvc Kalınlık: 0,25mm *The material is laminated to silicone coated paper by using Hot-Melt glue.

Galvanized and powder coated steel elements. The device permanently sited in the ground with concrete min. C-25/30. Structural posts protected with welded steel covers; bolts and screws protected with plastic end covers. Screw connections protected against corrosion by galvanizing.

The PROJECTOR LIFT MVS 30-15 is a versatile very compact projector lift that enables the installation of projectors in environments where particular aesthetical solutions are required. The product has been developed to be installed inside a false ceiling where very few space is available. You need inside the false ceiling only 13 cm. of minimum height to install lift and projector. The MVS 30-15 is supplied with an extremely silent motor that allows a descent of maximum 30 cm and can carry up to 15kg. The lift is supplied with two safety screws. * ceiling cover plate is NOT included

The PROJECTOR LIFT MVS 100-15 is a versatile and innovative product that enables the installation of projectors in environments where particular aesthetical solutions are needed. The product has been developed to be installed inside false ceilings in order to hide projector, lift and cables, thus granting the best aesthetic and practical solution. MVS 100-15 is supplied with an extremely silent motor that allows a descent from a minimum of 16 cm. to a maximum of 90 cm, and can carry up to 15kg. An interesting element of this lift is a cables gathering system with a raceway where to put the cables of the projector, so they will be hidden and tidy gathered together when the projector lift is going up. The lift is supplied with two safety screws. * ceiling cover plate not included

Baby Teaching Cloth Book Wanting to bring up the child a sense of proportion and the ability to save and cherish ？Just chose funny , this funny piggy bank. You just need to put your coin on the fish plate and the cat will seak out and steal it and say "thank you" in English,which is very funny and creative. Material: ABS plastic+eletronic component; Powered only by: 2*AA battery(not included) Product Dimension:Approx 12*10*9cm; Capacity:Approx 40 coins；Package Dimension:15cm*12.5cm*12cm;Weight:Approx 400g Perfect (Christmas) Gifts for Kids and perfect novelty piggy bank for home and office desks.NOTE: to make it easier to open by kids,No battery cover screw.

This feeder was initially designed for installation on the Angelus 60 L and was then adapted for many other machines. The innovative feature here is that the feeding screw is inclined and parallel to the cover stack, making the feeding more natural and fluid. This feeder is adjustable and, with the substitution of just a few parts, it is suitable for any cover diameter (between 50 and 105mm).

The screw conveyor conveys the material using the rotation of the screw blade and controls the discharge volume through the size and speed of the screw blade. There are two types of screw conveyor: U-shaped screw conveyor with top cover and tube screw conveyor. The advantage of the screw is that it avoids the dust problems specific to the outlet connected by a closed circuit. It is suitable for conveying various powders. The power end comes with different storage drum options.

The Bucket Filter is a plastic anti-debris grid that separates dirt from water and fits into the bottom of various buckets. It acts as a filter for dirt and grit, which remain at the bottom of the bucket and are not swept up by a sponge, wash mitt or brush. Features - Complete set with bucket filter grid (588.000.001), white 20 L bucket (588.020.001) and seal cover (588.010.001) - The bucket is made out of sturdy plastic and has a large capacity of 20 L - The lid or seal cover can be screwed onto the bucket so that a full bucket can be transported safely - A handy trolley simplifies the use of the bucket filter - Ideal for use in the automotive industry, garages, carwashes, showrooms, when cleaning vehicles while preventing sand and dirt from damaging paintwork Use When you run your wash glove, cloth, sponge or brush through the bucket, rub it against the Bucket Filter which will remove dirt and make it sink to the bottom of the bucket.

Imeta has also developed Cover Feeders that can feed aerosol tops and bottoms and special components such as varnish rings or deepdrawn covers, as well as a wide range of special feeders with three or four screws for rectangular or oval covers.

technoPLUS is an advanced designer enclosure made from high-quality, UV-resistant Luran for electronic applications outdoors. The lid already has a recess to accommodate membrane keypads, films or touchpads. The screw channels are outside of the enclosure interior, thus allowing the enclosure to be attached while the lid is closed. The screw channels are simply covered with captive designer clips following assembly. Practical lid supports are available to provide strain relief on internal mountings in the lid. To enable use almost anywhere outdoors, technoPLUS comes with a practical mast support, which clings to virtually any curve. In the interior, there are fastening domes for the easy attachment of internal mountings. Compatible cable glands and other accessories are of course also available.

aluPLUS is a modern enclosure made from die-cast aluminium for industrial electronics and electronic applications. It is available in the usual standard industrial sizes for the attachment of terminals, PCBs or mounting plates. The areas of application are numerous. aluPLUS is suitable for attachment to the wall outside and for industrial electronics and mechanical engineering. The lid has a recess to accommodate membrane keypads or front plates. The design covers cover the screws of the wall and lid attachment and give the enclosure an attractive appearance. The enclosure should be mounted while closed. Integrated M5 fastening threads in the bottom and lid offer optimum fastening options for a wide range of internal mountings. Extensive range of accessories and matching cable glands are also available.

tehcnoCASE is a modern plastic enclosure with design stripes in grey, red, green, blue or yellow, which can be easily snapped on to cover the screw channels and give the enclosure its own individual visual appearance. A standard recess in the lid enables front plates, films or membrane keypads to be accommodated. The large number of standard sizes offers a wide range of options for mounting numerous electronic or electrical attachments. There is also an option to combine various lids and bottoms with each other, increasing the variety. Fastening domes for the attachment of internal mounting are already integrated into all parts. Compatible cable glands, supporting rails and other accessories are of course also available.

commandCASE is a functional economical and elegant control enclosure for electrical or electronic applications. Due to its construction depth, it is ideally suited to connection to a suspension arm system. commandCASE is available in three versions: with hinges and quick-acting closure (also lockable), with hinges and screw or as a fully-screwed version with lid supports to provide strain-relief on the internal mounting in the lid. A recess to accommodate membrane keypads, front plates or to fit an operating panel has already been integrated. On the reverse, the screw channels are covered with cover caps, which also serve as edge protection. On the bottom and top are numerous fastening domes for attaching internal mounting. Mounting plates, matching cable glands and other accessories are also available.