Screw covers - Import export

Self-adhesive round hole covers made of self-adhesive plastic foil according to individual PANTONE, RAL or CMYK colour code with a diameter of 10 mm, 15 mm, 20 mm, 25 mm, 50 mm or custom sizes. 500 pieces minium order.

Screw-on closure with tamper-evident ring for compact jerrycan. Screw-on cover made of PP, seal made of PE, thread DIN50. The closure offers protection against tampering and a guaratee that the container has not been opened before, since the snap ring is visibly broken the first time the container is opened.

With the K 4000 Cut-n-Break, you can cut up to 400 mm from one side. It is suitable for flush cutting close to walls and floors as well as for smaller jobs such as window openings. The power cord is routed under the handle, ensuring durability and uninterrupted operation. The one-piece inspection cover and Torx screws make both assembly and maintenance easier

The profiled guide slide PFS is available in 5 series with sizes from 100 mm up to 425 mm width and strokes up to 2000 mm. To protect them against dirt accumulations, the slides are covered with bellow covers. Other covers on request. The slides are available in aluminium (nature anodized), or casted iron GGK-25. Optional steel C-45. The ball thread spindle drives are available in the qualities T5 and T7 with spindle pitches from 5 to 50 mm. PFS (basic equipment) ball screw spindle acc. to standard type allocation screwed up bellows cover coated on both sides integrated inductive limit switches (PNP break contact) incl. plug-connector in the endplate

technoPLUS is an advanced designer enclosure made from high-quality, UV-resistant Luran for electronic applications outdoors. The lid already has a recess to accommodate membrane keypads, films or touchpads. The screw channels are outside of the enclosure interior, thus allowing the enclosure to be attached while the lid is closed. The screw channels are simply covered with captive designer clips following assembly. Practical lid supports are available to provide strain relief on internal mountings in the lid. To enable use almost anywhere outdoors, technoPLUS comes with a practical mast support, which clings to virtually any curve. In the interior, there are fastening domes for the easy attachment of internal mountings. Compatible cable glands and other accessories are of course also available.

tehcnoCASE is a modern plastic enclosure with design stripes in grey, red, green, blue or yellow, which can be easily snapped on to cover the screw channels and give the enclosure its own individual visual appearance. A standard recess in the lid enables front plates, films or membrane keypads to be accommodated. The large number of standard sizes offers a wide range of options for mounting numerous electronic or electrical attachments. There is also an option to combine various lids and bottoms with each other, increasing the variety. Fastening domes for the attachment of internal mounting are already integrated into all parts. Compatible cable glands, supporting rails and other accessories are of course also available.

commandCASE is a functional economical and elegant control enclosure for electrical or electronic applications. Due to its construction depth, it is ideally suited to connection to a suspension arm system. commandCASE is available in three versions: with hinges and quick-acting closure (also lockable), with hinges and screw or as a fully-screwed version with lid supports to provide strain-relief on the internal mounting in the lid. A recess to accommodate membrane keypads, front plates or to fit an operating panel has already been integrated. On the reverse, the screw channels are covered with cover caps, which also serve as edge protection. On the bottom and top are numerous fastening domes for attaching internal mounting. Mounting plates, matching cable glands and other accessories are also available.

aluDISC is the first round aluminium enclosure for industrial electronics and electronic components. The unique shape integrates perfectly into industrial machinery and piping systems. Whether fitted to the wall, integrated into a pipe system or a machine body – the round shape always makes a good impression. The lid already has a recess to accommodate membrane keypads or a front plate. A version with a fold-out, transparent lid with ingress protection IP 65 is also available. The snap-on design covers hide the screw channels. The enclosure can be mounted while closed. Practical lid supports are also available. Fastening domes in the bottom and the lid to accommodate e.g. circuit boards or mounting plates are also integrated as standard. Matching cable glands and more can also be supplied by us.

Bernstein Series CP and CPS polyester enclosures are made of high-grade glass fiber-reinforced polyester. The black polyester enclosures conform to the requirements for Ex applications and are sufficient for accepting and encapsulating electrical and electronic and control components in harsh environments or implicitly explosive atmospheres. All enclosures have achieved protection class IP 66 in accordance with DIN EN 60529. The captive stainless steel cover screws are maintained by a self-latching element integrated into the cover. The threaded bushes are embedded in the flange on the narrow sides of the base and obtain mounting rails, plates and PC boards.

Ideal for booth construction, toolbuilding and furniture industry. Please note that diameter A should exceed the bore hole by 0.2 - 0.3 mm. Material: PE Colours: last digits 600 = white last digits 699 = black Further types on written request.

Screwed Sight Glass DIN 11851 /EN 10357 for welding into or onto vessel wall complete with glass disc, gaskets and slotted cover nut Use: Screwed Sight Glasses are used for observation of processes inside Boilers, Vessels and Pipes. They are often employed in food service, dairy, breweries and pharmaceutical applications. Due to the high temperature tolerance sterilization is possible.

monitor suspension arm incl. cable management cover for mounting of heavy monitors with 6 - 12 kg, 360° mounting flange can be attached lateral or transverse to the profile mounting plate VESA MIS-D 75/100 compatible, adjustable viewing angle and height; accessories included: mounting flange incl. bolt and cover cap Nutfixierungsplatten screws & nuts centering plates, anti-loss washers, anti-loss washers

Self-forming screw, Torx & Self-tapping screw, hexagon socket Connection of two aluminium profiles; no thread cutting is necessary to fix the screw; because of the special form of the head of the screw and the self-forming thread, a conductive connection of two proviles is achieved Material: Zinc plated steel Self-forming countersunk screw, with hexagon socket For all mounting applications of the front of the aluminium profile; detachable and reusable; designed for optimized fastening strength Material/surface: Steel burnished or galvanised Note: can be screwed on Cover cap available in the product portfolio Self-forming button-head Screw To fix connection angles, angles, turn-locks and other components to the core hole of the aluminum profile Material: zinc plated steel Alternative: Connecting screw M12x30 (optionally Torx) for connecting two aluminium profiles Material: zinc plated steel

Description: Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep) Material: Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: Steel Surface: Housing: Laquered Centering plates: Laquered Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc plated Color: Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu color Set: Various Sets available - Please contact us for Details Pack Quantity: 1 piece/set

Consisting of systainer® T-Loc III incl. 3-pc. tool cover and tool insert The 3-pc. tool cover consists of three inserts (material: PPC). An insert is attached to the systainer® cover using screws. The second insert is fastened in the systainer® using the mounting rod included in the scope of delivery. The third insert (dimensions approx. L 347 mm x W 252 mm) is placed between the first two inserts. It can be removed separately. systainer® material: ABS 2-pc. tool cover material: PPC Deep-drawn tray material: recycled PS