Oils- industrial - Import export

Incineration provides the highest destruction efficiency of waste. Slufer components and dangerous hydrocarbons from oil and gas industry, including BTEX can be incinerated, too. Our high technology constructions can achieve an efficiency of 99.9 %(DRF), depending on the materials you put in. Because of our know-how, we have automated the burning process to an optimal level with cost-economical fuel consumption. There are two kinds of incinerators: Hearth furnaces and rotary kiln. Booth are applicable in the oil and gas industry. Because of the higher sizes and quantity of disposal we recommend you to not smaller than IU-300. The best solution is IU-2000M due to its mobility and fast construction time.

Base oil SN-150 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-150 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-150 Can be used as base components in the manufacture of lubricating oils. It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion. In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.

BS "Bright Stock" / KS-19p oil is a high-viscosity cylinder oil, that refers to high-viscosity base oils obtained by distillation under atmospheric pressure and vacuum distillation, extraction and dewaxing of solvents from residual oils – as well as at the end of hydrotreating. The name "Bright Stock" comes from a method of producing a high viscosity cylinder oil of a bright color (Bright) by mixing naphtha with a dark colored cylinder oil, the mixture is left until winter, the wax ingredients are extracted from it, and then the naphtha liquid is distilled. BS "Bright Stock" oil is contained in gear oils, marine diesel engine oils, cylinder oils and other oils with a high viscosity index.

Hydraulic oil HLP 32/46/68 hydraulic oils with a high level of performance. They are manufactured on the basis of highly refined petroleum base oils with a multifunctional additive package that improves filterability, antioxidant, anticorrosive, antiwear, demulsifying and antifoam properties. Designed for use in hydraulic systems of industrial equipment operating under high mechanical and thermal loads, equipped with servo-hydraulic units, proportional control systems and filter elements with a filtration rating of 3-5 microns.

Base oil SN-400 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-400 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-400 Can be used as base components in the manufacture of lubricating oils It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.

Industrial oil I-12 / I-20 / I-40A / I-50 is intended for use in various types of low and medium loaded industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of the oil. The oils are produced on the basis of high quality mineral base components of the distillate type. The quality corresponds to All Union State standard – GOST 20799-88.

Isoparaffinic oil VHVI-4/6/8 - belongs to the base oils of group III and is used for the production of high-quality motor oils. VHVI-4/6/8 base oil is produced by hydrotreating of the hydrocracking residue at high pressure and has a high viscosity index, good low temperature properties, ultra-low sulfur content, low aromatic hydrocarbons content and low volatility. Low pour point provides high pumpability of oil, easy engine start at subzero temperatures, which allows them to be used in various climatic conditions Thermo-oxidative stability reduces oil oxidation at high engine temperatures, reduces the formation of deposits Low volatility reduces the frequency of oil refills. Long run of oil in severe operating conditions (longer service life by 1.5-2 times compared to mineral oils). Compatible with mineral oils and esters.

Base oil SN-80 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-80 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-80 Can be used as base components in the manufacture of lubricating oils. It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion. In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.

Base isoparaffinic oil MVI-2 manufactured by OJSC NGK Slavneft-YANOS (HVI-2, MGA-8 manufactured by Taneco). Isoparaffinic oil MVI-2 belongs to group II of base oils and is used for the production of high quality engine oils. MVI-2 oil is obtained by processing of naphthenic oil. It has good detergent properties, a sufficient viscosity index and a low pour point. Application area MVI-2 oil is used as a base for transformer, hydraulic oils, steering gear oils and special coolants for metalworking, turbine and other energy oils. MVI-2 advantages Low pour point provides high pumpability of oil, easy engine start at subzero temperatures, which allows them to be used in various climatic conditions. Thermo-oxidative stability reduces oil oxidation at high engine temperatures, reduces the formation of deposits. Low volatility reduces the frequency of oil refills. Long run of oil in difficult operating conditions.

To dispose of waste is more and more a cost factor. Every industrial company produces a lot of general and municipal waste. With a license and an incinerator, you have a way to handle your waste problem. Be sure, incinerate municipal rubbish is an ecological, cost-effective and easy solution. In which industrial companies it is very popular Construction companies Building Chemical companies Food industry Oil and gas industry Production of raw materials Plastic industry Every kind of wood industries CBD industry Pharmaceutical industry

Description: Thick, flammable liquid with odor Characteristics: soluble in water in any proportions, poorly soluble in ethers and benzole. It causes burns on contact with the skin as it has alkaline properties. Scope of application: It is used as an absorbent for CO2, H2S, SO2 gases; gas production and oil refining industries and in the production of detergents. Type of packaging: Jerry cans, steel barrels, intermediate bulk containers, tank trucks.

Description: Sulfamic acid is an organic compound of colorless diamond-shaped crystals that dissolves well in water and has poor reaction to organic solvents. Sulfamic acid is quite reactive with phenols, primary and secondary alcohols. Scope of application: as a raw material in the chemical agents synthesis and household cleaning products; in the food industry: for disinfection of tableware and kitchen utensils; in the pulp and paper industry: when cleaning paper-making machines; in the textile industry: for obtaining fire-resistant materials; in the oil industry: oil wells bottom hole treatment; acid is one of the main components in the production of cleaning products and detergents; as a raw material for cleaning water-cooling systems from mucus and impurities, including swimming pools.

Description: Oily colorless, odorless liquid with sweetish taste. Characteristics: Soluble in water, C2H5OH, acetone. Insoluble in aromatic bonds free compounds, chloroform and compounds with aromatic system. Scope of application: It is used in the following industries: chemical, textile, aviation, electrical, automotive, oil and gas industry, etc. Type of packaging: Jerry cans, steel barrels, intermediate bulk containers, tank trucks.

We produce an high effective industrial oil absorbent on basis natural peat moss. Oil absorbent ARCTIC has ability to biodegradation. Due to its excellent buoyancy, it is successfully used not only on soil and any hard surface, but is also especially effective on water. Oil absorption is 8-10 g oil per 1 g absorbent. Oil absorbent ARCTIC environmentally friendly, non toxic, absolutely safe for humans and animals. After use, it can be disposed of as a high-calorie secondary fuel when burned in boiler plants.

NEMS electrical insulation insert is a one-piece pipe product serves to protect the pipeline from electrochemical corrosion in areas affected by stray currents. Installed -at the boundaries of sections of electrochemical protection of pipelines -on the borders of property plots -at the boundaries of pipeline sections with different types and quality of protective coatings or a significant change in the specific electrical resistance of the soil -for electrical separation of aboveground sections of pipelines with a length of more than 1000 m from underground sections -a method for identifying pipeline sections that are affected by stray currents, as well as inductive AC guidance -at integrated gas and oil treatment plants, booster compressor stations or tank farms Advantages -Withstand heavy mechanical loads -The service life corresponds to the service life of the gas pipeline -Installed on all categories of gas pipelines -Operating temperature +150 C and above