At electrical - Import export

SNMPcard DA807 (art. CNDA807) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. The builtin USB port allows you to connect external optional peripherals.

Modular UPSs IMPULSE of the MODULE 25600 series are the most compact of the series of modular UPSs with an installation base of less than 2 m2 at a power up to 900 kVA. UPS MODULE is the best solution in the data center market due to the highest indicators of reliability and performance of the device. Modular UPSs IMPULSE of the MODULE series provide a high degree of power protection both for large data centers and for sensitive electrical equipment.

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSE-3242 enclosures are made of coated aluminum alloy in explosion-proof design, have a protection category of IP67 and ATEX-compliant. The NSBox access Nodes assembled in such enclosures can be used for outdoor and indoor installation in hazardous areas. The enclosure is corrosion resistant for long service life. The sizes of NSE-3242 enclosures are 325 x 425 x 297 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly:

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSE-4565 enclosures are made of coated aluminum alloy in explosion-proof design, have a protection category of IP67 and ATEX-compliant. The NSBox access Nodes assembled in such enclosures can be used for outdoor and indoor installation in hazardous areas. The enclosure is corrosion resistant for long service life. The sizes of NSE-4565 enclosures are 450 x 650 x 337 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly:

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSP-4060 enclosures are made of glass reinforced polyester and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is resistant to corrosion, chemicals and some acidic environments. It can be installed in environments that are constantly wet. The sizes of NSP-4060 enclosures are 400 x 600 x 230 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly:

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSP-4040 enclosures are made of glass reinforced polyester and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is resistant to corrosion, chemicals and some acidic environments. It can be installed in environments that are constantly wet. The sizes of NSP-4040 enclosures are 400 x 400 x 200 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSP-3040 enclosures are made of glass reinforced polyester and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is resistant to corrosion, chemicals and some acidic environments. It can be installed in environments that are constantly wet. The sizes of NSP-3040 enclosures are 300 x 400 x 200 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly:

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-6060 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-6060 enclosures are 600 x 600 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-4040 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-4040 enclosures are 400 x 400 x 230 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3860 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3860 enclosures are 380 x 600 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3838 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3838 enclosures are 380 x 380 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3040 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3040 enclosures are 300 x 400 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3030 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3030 enclosures are 300 x 300 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

IEEE 802.3/ 802.3u/ 802.3ab/ 802.3at (PoE auto detection) Optical port 1x 100/1000M SFP with supporting LFP function 36W | 72W PCE of maximum power with an input voltage of 56VDC POE Pin Assignment: 1/2(+), 3/6(-) and 4/5(+), 7/8(-)

IEEE 802.3at/3af, 4 ports PoE 30 | 60 | 95W 4K MAC address, Jumbo Frame 9Kb, Switch fabric 16Gbps POE Pin Assignment: 1/2(+), 3/6(-); 4/5(+), 7/8(-).

IEEE 802.3/802.3u/802.3ab/802.3x/802.3af/802.3at/802.3bt 1K MAC, 0,5Mbit buffer, Switch fabric 8 Gbps PoE pin assignment: Mode A | Mode B | 4-pairs 1/2, 4/5(+); 3/6, 7/8(-)

IEEE 802.3af/at/bt(PD Alive Check) /Passive, IGMP snooping; ERPS, EAPS, STP, RSTP, MSTP; QoS, VLAN (Port-based, 802.1q tag-based), Syslog, Radius Console/CLI, Web GUI, Telnet, SNMP, Syslog, RMON

IEEE 802.3/802.3u/802.3ab/802.3x/802.3at/802.3af 8K MAC, 1Mbit buffer, Switch fabric 10 Gbps PoE Pin Assignment: 1/2(+), 3/6(-). Mode A EndSpan PoE

IEEE 802.3at/3af (PD Alive Check), 8 ports PoE 36W IGMP snooping; STP, RSTP, MSTP, G.8032 ERPSv2, BPDU Guard; LACP QoS, CoS, DSCP, VLAN (MAC/Protocol-based, PVE, 802.1Q tag, QinQ) Telnet, CLI, Web, SNMP, RADIUS, TACACS+, ACL, DHCP option 82

IEEE 802.3at/3af (PD Alive Check), 8 ports PoE 30W IGMP snooping; STP, RSTP, MSTP, G.8032 ERPS, DHCP option 82; LACP QoS, CoS, DSCP, VLAN (Port-based, 802.1Q tag, QinQ), Syslog Telnet, CLI, Web, SNMP, RMON, RADIUS, TACACS+, SSL, SSH

NSBox-SUN access node is used to deploy protected autonomous or semi-autonomous outdoor applications in the area with no 24/7 electricity available and solar panels can be installed. Off-grid solar systems work by generating electricity from solar panels and using it to charge a battery via a charger controller. NSBox-SUN contains a charger controller that supports 18-40V solar panels up to 350W and maintains the proper charge of the battery to prevent overcharging and over-discharging. Battery capacity can be up to 200 Ah. The NSBon-51 charge controller is housed in small and rugged DIN rail or mounting panel mountable housing. The controller has three pairs of contacts for connecting the solar panel, battery and load. The front panel contains status LEDs and an integrated temperature sensor. Compensation -56 mV for each degree from 25C, reduces voltage with increasing temperature and vice versa. With temperature compensation charging, charging parameters are automatically adjusted.

The Industrial Power Booster is a power device which boosts 24VDC up to 55VDC to power up your PD for up to 72W. It is designed for environments where 48VDC power is not available. With all industrial graded components, this industrial power booster will guarantee a steady voltage output to your PD in a harsh environment. It’s perfect to use in security, communication, traffic and many other critical industrial environments. NSBon-48 Power Boosters are used with some 24 VDC powered NSBox-xxx for 48 VDC powered industrial PoE switches and another devices installed into these NSBox-xxx. Therefore NSBon-48 allows to avoid problems with different power requirements into electrical enclosure and helps to save space and solution cost. NSBon-48 has a very compact housing, an overload current protection and surge protection diodes on power input. The regulator knob allows to adjust the output voltage accurately in 48..55 VDC range.

There are two models of compact NVR, NSBon-45 and NSBon-44 with PoE ports. It can work with all ONVIF-compliant IP cameras, supporting dual stream and up to 4K definition. NVR can be used for offline recording with supporting 8x 1080P or 9x 720P network cameras, or as a required element for LTE/4G Router connecting. It supports recording by manual, by timing and by motion detection. It also supports pre-record and post-record time for motion detection, alarm recording, motion and/or alarm recording. Various PTZ protocols and PTZ operations such as preset, patrol, etc. The total hard disk storage up to 10TB or 4TB. 1*SATA HDD(3.5”) or 2*SATA HDD(2.5”) are supported. NVR can work and intelligently switches between H.264 and H.265 compressions. Compact device design allows DIN rail mounting. The aluminum casing serves as a heat sink. General features of both NVR: Network Video Input: 9 (5MP); Maximum Resolution: 8MP; Video Compression: H.265/H.264; Audio Compression

NSBon-49 is a high-efficiency isolated DC-DC converter with ultra-wide input voltage range and 12 or 24 VDC output. The most important application of this power converter is powering user's equipment that requires 12 or 24 VDC power and must be installed into outdoor access node or uninterruptable power supply cabinet with single 48V DC UPS system inside. 48VDC UPS is the most used UPS for outdoor access nodes because 48VDC power is required by most PoE switches. Therefore NSBon-49 power converter allows to install devices with different power requirements into the outdoor cabinet with single 48 VDC UPS system and helps to save space and solution cost. NSBon-49 can be used for powering LTE/4G routers, NVR's, access controllers, sensors etc. NSBon-49 has input under-voltage protection, output short-circuit, over-voltage and over-current protection. So using NSBon-49 power converter together with 48VDC UPS allows to provide uninterruptable power supply to 48V PoE switches and 12/24V

The NSBon-47 is a compact and cost effective Active PoE (48VDC) to Passive PoE (24VDC) converter. The input can accept any PoE that meets IEEE802.3af/at/bt standards from regular switches or injectors. The output is 24VDC Passive PoE up to 24W. Incorporating a compact, in-line design, they are perfect for outdoor use inside a weatherproof electrical enclosure. NSBon-47 can be connected to any PoE port of Industrial switch located inside outdoor access Node NSBox by RJ45 male connector. It is compatible with auto-sensing and is recognized by PoE switch as a 802.3at/af PD device. On the other side of the converter there is an RJ45 Female connector for connecting various devices powered 24VDC Passive PoE ranging from video camera, access point, and router (Ubiquiti UniFi, airMAX etc.). Pins 4,5 and 7,8 of the RJ45 Female connector are used for powering in PoE mode B. Maximum output power is 24W. NSBon-47 compatible with all 24VDC Passive PoE devices.

NSBon-36 is used to protect user's equipment installed into NSBox Access Node or NSB/NSE/NSP electrical enclosure with climatic control system inside from damage that can be caused by system start in low temperature conditions. The idea is not to apply power to the equipment before temperature inside the cabinet reaches acceptable level. I.e. if the temperature is lower than required by protected device's datasheet and power is applied to the entire Access node or Enclosure, the heater starts first and only after temperature rises above level set by user power is applied to the protected device. NSBon-36 consists of normally open thermostat with adjustable threshold, a contactor that is used to apply power to the user's equipment under protection and terminal blocks.

The compact Fan Heater prevents the formation of condensation and provides an evenly distributed interior air temperature in electrical enclosures. It has clip for DIN Rail or Door mounting. The heating element is made on the basis of a self-regulating heating cable. The temperature of the heating element does not exceed 65°C, which ensures maximum safety and energy efficiency. The original design of the cable fastening does not allow its individual turns to touch each other, which allows maintaining the maximum heat transfer. The heater and fan are connected to the electrical circuit using two screw terminals. It is possible to separate the power circuits of the heater and the fan and use the fan together with the heater or separately in the cooling / ventilation modes of the enclosure. The NSBon-18 is suitable for the most types of junction boxes and electrical enclosures.

NSBon-11 is a surge protection device suitable for AC 50/60Hz, rated voltage up to 280V. It protects user's equipment to indirect and direct lightning effect or other transient overvoltage. NSBon-11 surge protector is designed according to IEC 61643-1/GB 18802.1 and can be applied for TNS power supply systems. NSBon-11 consists of two pluggable DIN-rail mounted modules that are easy for installation and maintenance and should be installed close to the protected equipment. NSBon-11 surge protector has LED indicator that is on until there is no fault and the device is operating properly. The LED is off after internal thermal disconnection device actuation and failure. The device has L,N and PE terminal blocks for wires up to 2,5 sq. mm.

The NSBon-08 is a special socket for DIN rail mounting. The socket has a ground contact. The case is made of fireproof polyamide. The sockets are used for different purposes ranging from repair works, distribution of power supplies, and customer devices connection.