Results for
THOMAS CONSTRUCTIONS MECANIQUES - TCM SAS
France
From the design phase of your project, we take care of installing all the electrical and electronic components: electrical studies PLC studies and programming production of electrical diagrams, wiring and installation logbooks wiring of power cabinets, control cabinets (automation), pneumatic cabinets and frames installation of cable trays on-site connection final inspection, power up and validation
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the removal or decanting of acids.* Media examples: Hydrochloric acid, battery acid, iron-III-chloride, phosphoric acid, chromic acid and citric acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearings * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Drum pump is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suitable for the withdrawal or decanting of solvents, optionally available with Ex-plug. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable * Approved according to ATEX directive 2014/34/EU, category ½
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Pump Set is suitable for thin, flammable and inflammable liquids and hydrocarbons. Perfectly suited for withdrawing or transferring explosive media and solvents. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2
Request for a quoteLUTZ PUMPEN GMBH
Germany
The electric pump set is suitable for low to high viscosity media in the food & pharmaceutical sector and is perfect for dispensing or transferring foodstuffs. * Pump tube equipped with Lutz Original handwheel Features & advantages * optionally with electric or compressed air drive * lubricant-free: therefore no contamination of the pumped medium * facilitated and accelerated emptying processes * universally resistant ETFE shaft bearing * easy disassembly: maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable
Request for a quoteEAE ELECTRIC
Turkey
E-Line TKS series trunking cover cable trays systems are used for wiring in the internal environments. They are professionally manufactured as pre-galvanized or painted options. The cover can be mounted with ease due to its exceptional locking system. Mounting the modules on trays is done with ease..
Request for a quoteOPTIMEL SCHMELZGUSSTECHNIK GMBH
Germany
The CUSTOMline hot melt machine is the top solution for customized casting requirements. It is configured specifically according to customer requirements and can handle complex casting tasks with exceptional precision and efficiency. This machine is ideal for special applications where standard solutions are not sufficient. With the CUSTOMline you get a casting machine that is tailored precisely to the specific needs of your production process in order to achieve optimal results. product [hot melt application systems, hot melt coating machines for paper, hot melt, hot melt adhesives, hot melt packaging, hot melt adhesives, special machines for adhesive processing, hot melts, machines for gluing, machine for gluing, melt casting technology with hot melt, hot melt coating, gluing machines, special machines for casting, sealing, foaming, gluing, special packaging machines]
Request for a quoteBDA GLOBAL TRADING
Turkey
High Mast Lighting Industrial, External&Internal Lighting fixtures Decorative Lighting Fixtures AGL Cables Fiberoptic Cables BMS Cables
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 539 2/2-way globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. An integral optical and electrical position indicator is standard. — Linear or modified equal-percentage control characteristics — High flow rates — Force and speed are variably adjustable — Extensive diagnostic facilities — Operable via web interface eSy-Web — Integral optical position indicator and LED high visibility display — Standard gland packing suitable for vacuum up to 20 mbar (abs.)
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 498 PTFE seated butterfly valve is motorized. Various metal or plastic on/off or control actuators are available. Disc and shaft are one-piece, body and seat are available in different designs. The butterfly valve is available in nominal sizes DN 40 - 900 (1½? - 36?) and in wafer and lugged body versions. —Suitable for isolating and control functions with gaseous and liquid media —Seal material TFM™ (FDA 21CRF 177.1550) —Installation length acc. to ISO 5752/20, EN 558-1/20, JIS 10K
Request for a quoteEUROQUARTZ LTD
United Kingdom
96SMF and 98SMF, SMD 6 x 3.5mm, ultra-low profile, Monolithic Crystal Filter
Request for a quoteEUROQUARTZ LTD
United Kingdom
SMD helical filter, are custom wound and screened. The helical band pass filter coils are available from 45MHz to 2600MHz, triple pole, 50 Ohms or 75 Ohms matching impedance.
Request for a quoteLINDHAUS S.R.L.
Italy
Design, technology and construction 100% made in ItalyUse with battery and cordHigh efficiency motors for the longest running timeManoeuvrable and light, just guide it and it goes by itself!Removable water tanks on the body frameThe world’s lowest base housing profile 230 mm (9 inches)Superior working capacity 1500 sqm/h (16,000 sqft/h)Scrubs + dries wall to wall + frontDries perfectly on turns thanks to the easy glide suction nozzleQuick brush roller and squeegee replacement without toolsThe body frame turns to fold the machine for transport in a vehicleLight weight and low noise level“Electric” version is also available
Request for a quoteLINDHAUS S.R.L.
Italy
Ideal for mixed applications: hard floors / carpeted floorsPatented mechanical sweeping system “Twin Force” and powerful suction6-stage filtration systemOnly 100gr. Handle weight, quiet and easy-to-useErgonomic handle and aluminum telescopic wandOnly 14cm base-height for easy access under furnitureAdjustable front flap to collect debris up to 10mm sizeDry Cleaning System (DCS) available (optional)Battery Version equipped with 36V-6Ah Lithium Ion battery for long runtimeElectric Version with cable for non-stop work
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CREISCENDO
France
Supply of electrical equipment on major projects in Africa (Hotels, Datacenters, Malls, Hospitals, LV / MV, lightings etc)
Request for a quoteNORIS GROUP GMBH
Germany
Energy storage systems (ESS) are an essential part for modern, environmental-friendly and energy-efficient ship propulsion systems. By using different ship operating modes, the energy balance can be significantly improved and thus, the fuel consumption and the emission volume can be reduced or in case of fully electric systems, emission can be even completely avoided. By using an energy storage system, the combustion engines operate mainly within the optimum speed and load range and this reduces the maintenance costs. Furthermore, the redundancy of electrical and common propulsion drives minimises immensely the blackout risk. In the field of energy storage, the battery storages belong to the most common and most efficient storage systems. Safe and reliable energy storage due to PBES CellCoolTM Liquid Cooling Maximum power and performance due to high performance XALT Lithium-ion cells (3C rate) Modular cell exchange concept (CellSwapTM) ensures easy renewing of old cells
Request for a quoteVERFAHRENSTECHNIK HÜBERS GMBH
Germany
System for the impregnation of electomagnetic coils, e.g. of electric motors, transformers, generators Impregnating in electricla engineering means applying an impregnating agent in gaseous or fluid form to a porous body in order to insulate it electrically, i.e. that reliable protection against electrical breakdown is provided even when the thickness of the insulating layer is small. For each application HÜBERS provides appropriate process. HÜBERS offers all relevant process variants including vacuum impregnation, vacuum-pressure impregnation and atmospheric impregnation and of these coupled with the use of the many different impregnating agents such as varnish, resin, oil, wax, gas etc. The processes of evacuating the parts prior to impregnation and if necessary of vacuum-drying the impregnated parts are matched to the properties of the parts and ensure that the agent wets the walls of the pores properly and fills the cavities completely.
Request for a quoteTRIO UKRAINE LLC
Ukraine
The electrical blanket has been using for many years in the Western countries, especially in North America and Europe. But despite the fact that it was presented on Ukrainian market just recently, it is highly demanded and gained the trust of Ukrainian consumers due to its reasonable price, high practicality, safety, and most importantly, due to its usefulness.
Request for a quoteTRIO UKRAINE LLC
Ukraine
Now you can sleep in warmth and breathe fresh air during the whole night! Forget about humidity in your bed! Relieves tension, muscle pain and stress, relaxes the whole body! Your sofa will exude pleasant, comfortable warmth, even when you are sitting on it! You will be able to heat yourself very economically! Allows you to sleep even in a room with a temperature of about 0 C! Austrian wire (nickel-chromium) Cotton fabric cover You can stay at your summer house for 2-3 months longer every year A great gift for the whole family! You won’t need thick blankets and uncomfortable heating pads A great assistant in beauty saloons and physiotherapy cabinets! Easy to transport in a practical, beautiful reusable packaging with handles
Request for a quoteKRELUS AG
Switzerland
KRELUS also supplies the electrical and electronic controls with temperature controlling, always according to customers requirements.
Request for a quoteAGGREKO CANNOCK
United Kingdom
Our industrial 18 kW electric heater is quick and easy to install and operate. The unit has two fan speeds which allows for optimum performance under most site applications. Quick and easy to install and operate. Machine can be set at 4.5-9-18 kW. Fans can be regulated to operate at both half and full speed. Integrated air distributor provides multi-directional airflow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Fitted with European G4 filters which will remove visible dust, wood and metal particles from the air creating a cleaner working environment. Optimum performance under most site applications. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets. Promotes a cleaner and safer working environment. Helps towards achieving BREEAM points.
Request for a quoteAGGREKO CANNOCK
United Kingdom
Our industrial 3 kW electric heater hire will keep your operations running and your projects on track. This heater is one of the most convenient machines on the market in terms of dimensions, weight and performance. Easy to carry and transport with an optional wall mounting bracket. Integrated air distributor provides multi-directional air flow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Suitable for both indoor and outdoor commercial use. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets.
Request for a quoteBLICKLE RÄDER+ROLLEN GMBH U. CO. KG
Germany
Muscular and skeletal problems are the most common reasons for people being unable to work, particularly if they have a job that frequently involves physically strenuous activity like pushing and pulling loads. The electric drive systems of the Blickle ErgoMove® series reduce these health risks considerably. The effort required for pulling and pushing is reduced by up to 100 %. The physical strain on the operator is decreased during internal material transport due to the considerably lower amount of effort required compared with manual operation. Equipment and transport units of any kind can be quickly and easily upgraded with a “plug & play” electric drive, steering and braking assistance. The modular sets include two fixed castors with electric drive, cockpit solutions with integrated controls and battery unit as well as all relevant safety features.
Request for a quoteARTHUR WEISSBACH GMBH MASCHINENFABRIK
Germany
This installation includes cable duct construction, cable laying, connection of the control cabinet, components and drives, and grounding in accordance with regulations.
Request for a quoteSCHNIEWINDT GMBH & CO. KG
Germany
Since the invention of the “Schniewindt grid” in 1902, we produce high voltage resistors and are thus among the pioneers in the electrical industry. Due to continuous development of our products and new developments according to the respective needs of the market, we are now one of the leading manufacturers of electric heating equipment, resistance equipment and sensors for current and voltage measurement
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
# Side aspiration Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC IPX4.
Request for a quoteResults for
At electrical - Import exportNumber of results
1,681 ProductsCountries
Company type
Category