It equipment - Import export

The inverter machine VIKING 500A PRO is used for manual arc welding of metal blanks. The inverter has a functional control panel with a digital display that displays the main operating parameters. The device is equipped with overload protection and voltage surge protection. The technologies applied during the manufacture of VIKING 500A PRO devices allow performing any tasks in welding, surfacing and cutting metal structures for performing work with any kind of electrodes with a diameter of up to 6 mm and a maximum arc welding current of up to 500А (100% at 420 A). The welding inverter machine can be used at low temperatures and reduced supply voltage. Adjustable functions of hot start and arc reheat imply the ability to adjust the operation of the device with minimal spattering and allow you to perform work in any spatial position of the electrode and welded surfaces.

Operating from a single-phase 220 V network, the industrial welding inverter ТОРУС-250 Extra has an increased arc welding current up to 250 Amperes and, therefore, an increased percentage of operating time (TP). This allows performing continuous welding works: the device provides TP = 100% at an arc welding current of up to 225 Amperes (electrodes with a diameter of 5 – 6 mm). The power consumption when welding with “household” electrodes with a diameter of 3 mm is such that the device can be connected to a regular household outlet. Thus, the ТОРУС-250 Extra device is universal for industrial facilities and for cottage areas.

AMT&C LLC for many years is engaged in design and manufacture of the measuring equipment intended for research of magnetic properties of materials. In the field of the magnetocaloric effect (MCE) these products continue own scientific interests of the AMT&C company employees, recognized experts in this realm of physics. Manufacture of the scientific equipment is based on the following core technologies, backed by patents and numerous know-how: - a wide experience in design and manufacture of complicated magnetic systems, including the adjustable magnetic field generators, controlled by a computer; - use of the most advanced products and ideas in the field of measuring technics; - the magnetic field source and data acquisition system are controlled by means of the specialized software that allows to create setups operating in automatic mode; as a rule, the LabView based software is used. Since 2009 AMT&C LLC produces the measuring equipment under trade mark "MagEq".

For testing cardio-stimulators and other medical devices, a set of the magnetic field sources was designed having a magnetic flux density in the working area from 1 to 300 mT.

The magnetic system of this field source is also built on the principle of nested cylindrical Halbach-structures. An important feature is the presence of two motors, controlled independently, so it is possible to manage the change not only the magnitude but also the direction of the magnetic field. Because the device was designed for operation together with an optical microscope, the vertical size of the system near the working region is reduced to 90 mm. Stepper motors, that turn the two magnetic subsystems, are located on the sides of the casing

This type of magnetic systems is developed for NMR applications, but can also be used for other tasks requiring the highly homogeneous magnetic field in the significant working volume. The main magnetic system, built on the principle of dipole Halbach-structure, is complemented by the additional corrective system of magnetic elements, that allows to bring the homogeneity of the magnetic field to the level of 10-4 in the desired working volume.

This magnetic system is specially designed for non-destructive testing of pumped vacuum devices, that required the creation of a uniform magnetic field not only in the center of the operating bore, but in the toroidal region of large size. The system is assembled on the basis of NdFeB permanent magnets.

High-tech research is, perhaps, that particular market where the scientific potential and expertise of AMT&C’s research and engineering personnel can most fully be realized and appreciated. We offer the calculation, design and manufacture services in creating high-strength high-uniformity rare earth magnetic field sources/systems for BEAM CONTROL applications (beam focusing, charged particles acceleration and deflection). The development of permanent magnetic field sources for use with SPM, STM, AFM systems, as well as for MRAM and MRI/NMR applications, to the customer’s specific requirements is another promising area for advantageous collaboration.

AMT&C LLC produces a wide variety of magnetic blocks – basic components of the pipeline flaw detectors. Thanks to the stable quality and guaranteed high magnetic parameters of our magnetic assemblies we supply them for largest Russian companies producers of the diagnostics equipment for gas and oil pipelines.

This type of magnetic field sources also is based on the principle of dipole Halbach-structure, but the special design permits to get an optical access to the sample under investigation along several directions with a rather wide aperture. It is possible to supply the system with a built-in field measuring system, connected to a PC. The field adjustment can be controlled from a PC or with a built-in controller. The geometrical and field parameters described above can be change under customer specification.

This type of highly intensive magnetic field generator is based on the dipole Halbach structure principle and offers the possibility to vary the field value, including field polarity reversal, from –Bmax up to +Bmax. The magnetic induction vector is directed transverse to a cylinder-shaped working bore. The field direction is constant; the field uniformity is ±0.5%. The system is PC-controlled, so it is possible to assign various time profiles of the magnetic field. It is important, that it is possible, using these permanent magnet assemblies, to reach rather high field modulation rates – up to 10 T/sec. AMT&C LLC offers the production of the adjustable field systems under customer specifications. In case the high field uniformity and high field changing rate are not needed we can offer various types of simple adjustable systems. For example, the shown device has symmetrically moving poles so the inductance in the central point can be changed in limits from 0.1 to 1 T.

The compact system of permanent magnets NdFeB, designed according to the principle of the dipole Halbachstructure, allows to get, inside the bore, rather homogeneous magnetic field with the magnetic flux density up to 23 Tesla. The system can be an efficient alternative to electromagnetic sources of the magnetic field, and can be used in scientific and applied research requiring magnetic fields of high intensity. Geometrical dimensions and magnetic flux density in Halbachtype systems can vary widely, the attached data and photos are typical examples. AMT&C LLC offers the manufacturing of steady magnetic field systems according the customer technical specifications. To improve the temperature stability the system can be assembled of SmCo magnets.

AMT&C LLC developed several types of axial magnetic field systems of permanent magnets that allow to reach highly homogenous field in a wide ranges of magnetic flux density and working area size. Examples of magnetic systems, given in the table, represent typical axial field systems that were designed and manufactured according to customized technical requirements. At your request the magnetic field source will be optimized to get the required parameters.

AMT&C LLC offers a full range of services in calculations, design and manufacturing of permanent magnet assemblies with required magnetic field configuration. Many years experience in complicated magnetic systems production combined with application of modern most effective magnetic materials permit us to reach high parameters: - to produce, with permanent magnet systems, the magnetic flux density up to 3 Tesla and more; - to reach high homogeneity up to 105; - to create magnetic systems with complicated field pattern; - to produce adjustable magnetic field generators on the basis of permanent magnets. The magnetic field changing rate in such systems can reach 10 Tesla per second.

Laser equipment LASEST because of its versatility and high capabilities is a complex laser technology, therefore, to work on it are allowed specialists who have undergone a training course at LasMedTech. All customers who purchase LASEST equipment get the opportunity to take a free training course at the laser complex, which lasts, as a rule, for 23 days, considering all the theoretical and practical features of using modern laser equipment. Training can take place both on the territory of the LasMedTech clinical base in Moscow and in the clinic of the buyer (depending on the wishes of the trained doctors)

laserThe Dynamic LASEST CO2 laser is the most advanced laser ablation module in its class. The unique technical characteristics of this laser device are due to a number of factors that make it the leader among CO2 lasers. First, CO2 Dynamic has flexible fiber output, which offers a number of advantages over conservative articulated laser devices from other manufacturers. This is especially important for surgical or gynecological laser procedures, where maximum precision and selectivity of exposure is required. In addition, 9 (!) Different attachments and handpieces can be attached to this laser device, which allows a doctor to perform laser operations in absolutely any field of medicine. This medical CO2 laser does not require any consumables and, thanks to the builtin gas active medium with a new generation metal RF tube, has a maximum long service life 510 times higher than conservative carbon dioxide lasers with a conventional glass gas active.

The Diode 3 Max LASEST рair removal diode laser is the most advanced laser diode tip in its class. This diode module has advanced energy and spectral characteristics, due to which it combines the three main wavelengths for laser hair removal – 755, 808 and 1064nm. The wavelength of 755nm penetrates the skin by 1.52mm and is absorbed to the maximum by the pigment melanin, which is contained in the hair. The wavelength of the laser diode 808nm has a maximum photothermal effect on the hair shaft and its follicles. And the wavelength of 1064 nm, which is able to penetrate the skin to a depth of 45 mm, has a coagulating effect on the network of capillaries that feed the follicles and thus stop the restoration of damaged hair. Thanks to the combination of all three wavelengths in one diode laser, the number of procedures required to completely stop the hair is significantly reduced, because a complex effect of three independent factors during the laser hair removal procedure.

Dual Gentle LASEST technology opens up new possibilities for specialists in the field of laser gynecology and intimate plastic surgery. A feature of this technology is the use of an innovative manipulator that allows the doctor to choose the type of distribution of laser radiation necessary ​​flat, radial, pixel or combined. The handpiece has a special graduated scale and fixed rotary positions, which increases accuracy and accuracy during the procedure. The gynecological handpiece can be used with two laser modules Er YAG Active and Nd YAG 1320 nm, which significantly expands the therapeutic range and effectiveness of the Dual Gentle technology. All LASEST gynecological accessories are made of special materials that can be sterilized repeatedly and used accordingly without risk to the health of patients

The Nd YAG Invasive laser module is the most effective laser instrument in the hands of dermatologists and surgeons.This highpower module allows for a wide range of surgical operations using open, laparoscopic and endoscopic incision, excision, resection, ablation, vaporization, coagulation and stopping bleeding in the soft tissues in such fields of medicine as urology, gynecology, gastroenterology, arthroscopy, lung discectomy, otolaryngology, dermatology, reconstructive surgery and general surgery.With the Nd YAG Invasive laser module, it is possible to use various optical fibers that differ in diameter (from 0.3 mm to 1 mm), length, shape of the output tip (end, radial, conical), which significantly increases the accuracy and convenience of surgical procedures.

The RUBY Active LASEST module is designed to remove various types of age spots and tattoos in blue and green. For tattoos with a red or yellowish tint, we recomend using of Nd YAG QSwitched KTP LASEST laser. The wavelength of laser radiation 694 nm in combination with the implemented method of ultrashort pulses has wider application than 532 nm KTP of a neodymium laser and is also able to penetrate deeper (by 1.52 mm) into the skin. Only on the LASEST laser apparatus is a multiselective system of regimes for removing tattoos and pigments implemented, which involves the use of optimal parameters of wavelengths, energy and power values.

The technology of the Nd YAG 1320 LASEST module is based on the principle of fractional photothermolysis and underlies the use of nonablation fractional laser techniques (NFLT). The latest deep pixel LASEST fractal technique is used for laser skin rejuvenation, treatment of stretch marks and scars, and acne therapy. Laser radiation of Nd YAG 1320 creates microchannels in the skin with coagulation at various depths, allowing you to start the regeneration processes not only in a certain layer of the skin as in the usual fractional exposure, but over the entire thickness of the dermis from the topmost layer of the epidermis to a depth of 45 mm , thus creating an ordered matrix throughout the volume, contributing to the global launch of the natural mechanism of collagenogenesis, followed by the formation of new elastin and collagen. With this technique, the rate of formation of collagen fibers is 34 times higher compared to conventional nonablative antiaging laser techniques.

The Nd YAG QSwitched Active LASEST module is ideal for removing red, yellow and black tattoos, treating vascular diseases, treating acne, and carbon peeling. A feature of the module is the use of various time modes, such as the free generation mode (Freemode), Qswitch mode (QSwitch), hybrid mode (Hybride mode). These modes can be used both separately and together, which allows you to combine thermal with shockacoustic effects on the tissue. Enhanced options are provided when using the replaceable miniature handpiece KTR, which allows you to additionally generate a wavelength of 532 nm for the effective treatment of complex vascular diseases.

Er YAG Active LASEST module is widely used for most ablative procedures in aesthetic medicine. The radiation wavelength is 2940 nm, which corresponds to the maximum peak of water absorption, so the depth of direct optical radiation penetration into the skin of this laser module is only 0.01 – 0.1 mm, which guarantees very high accuracy and the absence of side effects like with more “hard” ones CO2 laser. The Er YAG Active laser module can operate in a wide range from ultrashort (from 100 μs) to ultralong (50 ms) pulses depending on the selected mode or technique. An ultrashort pulse allows “cold” surface grinding without heating the lower layers of the skin, which is ideal for correcting agerelated manifestations, scars and postacne. The ultralong impulse promotes the deepest possible laser heating, due to which stimulation of own collagen cells, structural changes in the dermal layer occurs, improving skin texture, smoothing scars, reducing agerelated skin changes

Using the laser module Nd YAG Dynamic LASEST, it is possible to carry out more than 20 procedures for various directions in the field of aesthetic medicine and cosmetology. A large number of handpieces are used for this module, in which the latest latest technologies are implemented, such as Flat Spot, Gauss Beam, 3d Pixel. Highenergy laser radiation with a wavelength of 1064 nm, realized in unique time modes (from ultrashort to ultralong pulses) provides a selective effect on deep targets without thermal damage to the skin. For maximum comfort and convenience of the procedure, LASEST users can use the contactless system of dynamic skin cooling CoolFlash. When working with LASEST laser modules, you can control the temperature and flow rate of cold air in the treatment area, which guarantees an excellent result during the procedure.

The ALEX Dynamic LASEST module generates laser radiation with a wavelength of 755 nm, which is the best choice for removing hair from the skin of the IIII phototype (Fitzpatrick).The light energy of the laser module absorbed by the melanin of the hair is transformed into heat, which leads to the “burning” of the hair shaft, the temperature destruction of the hair follicle and the coagulation of the vessel that feeds it. Selective thermal destruction of a specific target occurs, which minimizes the risk of damage to surrounding tissues.ALEX Dynamic LASEST laser module is supplied with a special handpiece where the spot size is automatically tuned (from 4 to 24 (!) Mm) without unscrewing the fiber and therefore without the risk of damage to optical

The MODULE K series is a scalable, redundant modular UPS system designed to provide cost effective high availability of energy for high density data centers and mission critical applications. Online double conversion UPS with advanced digital control. The modular architecture allows power and battery life to scale as demand or availability increases. Combination of modular design with N + X parallel redundancy technology. The maximum capacity of a single UPS is 625 kVA. The UPS can be operated in parallel to build a system up to 2500 kVA.

THE STABILIZER IMPULSE PSN3200 will ensure the minimization of equipment failures, a high level of protection, a decrease in energy losses and a decrease in downtime for critical consumers for a wide range of applications. IMPULSE PSN3200 can be used not only on production lines, but also to protect equipment in cottages or offices.

THE STABILIZER IMPULSE PSN3120 will ensure the minimization of equipment failures, a high level of protection, a decrease in energy losses and a decrease in the downtime of critical consumers for a wide range of applications. IMPULSE PSN3120 can be used not only on production lines, but also to protect equipment in cottages or offices.

THE STABILIZER IMPULSE PSN380 will ensure the minimization of equipment failures, a high level of protection, a decrease in energy losses and a decrease in the downtime of critical consumers for a wide range of applications. IMPULSE PSN380 can be used not only on production lines, but also to protect equipment in cottages or offices.