Confectionery - Import export

SURA-OM confectionery casting machine for casting sweets fudge in the correction . The machine consists of a moving chain conveyor. The mass from the hopper enters the gear-type dosing head, which performs the casting of sweets into silicone, polycarbonate molds, etc.

The Sura MK and Sura AMK candy forming machines are designed for forming endless bundles, as well as candy cases with and without filling of various shapes in cross-section: rectangular; trapezoidal; semicircular; round, etc. The Sura MK machine is equipped with a guillotine cutting unit, a conveyor and can be connected to glazing machines and cooling tunnels; The Sura AMK machine is used with cooling tunnels and deposits bundles or candy cases on the tunnel tape. For the production of candy cases, the Sura AMK machine is equipped with a string cutting unit.

Starch molding machine is designed for production of fruit-jelly (including jelly candy), liqueur, fondant sweets and Korovka sweets by starch molding. The machine consists of a movable belt, a molding mechanism and a depositor mechanism. The tray is filled with starch which serves as a forming material. The confectionery mass is fed from the hopper to the dosing unit which performs deposition of sweets/molding the marmalade into molds formed in the starch layer.

Cooling of confectionery and bakery products before packaging is one of the most long-run (up to 5 hours or more) processes in production. The conveyor belt with the length of more than 300 m is necessary to transport the products during this time. Сура СKБ spiral conveyor is the best option for a conveyor system for cooling products for a long time. Due to the spiral geometry of the belt arrangement in space, it is possible to provide a large length of the belt in a minimum volume that essentially saves production space. In addition, the product is transported on a spiral conveyor belt as softly as possible, without rolling from one lay to another like in multilayered systems.

It is designed for high-quality and uniform coating of various confectionery products with various types of glaze: chocolate fat sugar syrup, etc Due to the tank heating jacket and a mixing device, the glaze is heated to the operating temperature. The glaze is pumped into the glazing tank, and then the tank slide gates are opened and adjusted to obtain a straight, steady stream. The products to be glazed are placed on the feed conveyor and the conveyor is powered up. The products are transported on the large conveyor to the glazing area and then to the blowing area to remove excess glaze from the top. The bottom of the product is smoothed with the special rollers and then the products are transported to the cooling area. The glazing machine can be equipped with a decorator. Products can be glazed separately from the top, bottom or all sides. The machines for glazing with sugar syrup are manufactured considering some modifications necessary to operate the fast-hardening products.

Depositors (extruders) are custom-manufactured depending on the needs of the Customer and the parameters of the oven. All projects are coordinated with the Customer and the oven manufacturers. The machine frame is manufactured in the following types: •U-shaped frame; •frame of intermediate section; •frame mounted in the oven tension station. Mechanisms and units of machines are specially designed considering the increased operating temperature and continuous equipment operation throughout the day. (for making various types of cookies, gingerbread, etc.)

Thermal cooker is intended to make syrup, marmalade, marshmallows, and chocolate glaze. It is designed for the preparation and heating of various confectionery masses: - chocolate glaze; - syrups; - fillings, jams; - marshmallow, marmalade; - scalded dough; - soups, etc. We produce cookers with volume of up to 2000 liters. The frame mixer with scrapers, the DN40 drain valve, temperature sensors for product and heat transfer agent, and heat insulation of cooking container are installed in the factory state. DN60, DN80 or DN100 drain valves are installed according to the Customer's choice. The cookers are equipped with a mechanism of automatic or manual reverse intended to make viscous masses, for example, choux pastry. In this case, the mass is discharged through the neck of the cooker. The reversible and more powerful mixer drive (at least 0.55 kW) is equipped at the bottom. It is possible to install a variable frequency mixer drive for smooth speed change.

The СУРА-СП forming machine is designed for molding sugar cookies onto a belt with a further transportation to a wire-mesh plate of tunnel oven. The forming drum is one of the main units of the forming machine. It is a part of this machine and used for forming one type of cookies that have defined shape and pattern. At the request of the Customer, we can manufacture any number of drums with any pattern and shape of cookies. The patterns and shapes are chosen according to the catalogue.

Highly automated machines is designed for dosing of dough of various shapes and sizes without or with filling from different confectionery products on a baking pan by extrusion: -shortbread dough (hard or soft); -gingerbread dough; -dough for oatmeal cookies; -biscuit dough; -protein mass (souffle sweetmeat, pastille, marshmallow) The two-hopper mechanism of Сура СД and Сура СДУ depositors ensures the dosing of dough for double-color products or single-color filled products. All Сура С, Сура СД, Сура СДУ machines in standard version are equipped with mechanisms for rotation of draw plates and movement of the conveyor in the vertical plane. Сура СДУ universal depositor can be equipped with a diaphragm cutting unit where the diaphragms can be arranged both in single row and in staggered rows. Possibility to equip any Сура С, Сура СД, Сура СДУ machines additionally with a string cutting unit given that the frame of all machine s are equipped with the connection elements.

Modern, convenient and safe packaging for all types of confectionery. Excellent transparency and gloss, strength and elasticity, frost resistance up to -400 ° C and the possibility of baking at +220°C. Packaging for cakes, pies, pastries, marshmallows, marmalade, sweets and pastries. We develop a beautiful, solemn, gift design of containers for sweets and cakes using a glossy polymer PET, since it retains smoothness and transparency under different storage conditions. Packaging for a high temperature (+ 110C to 220C) made of PP and SPET for confectionery products required baking or heating in an oven or microwave. The lower temperature barrier for plastic containers is also significant, since they can store products in shock freezing and freezing conditions - these products include ice cream, frozen semi-finished dough products, frozen fruits, and many others. Portioned placement of confectionery products in a tray or container is possible since its bottom can be sectional.

Ingredients: flour, sugar, honey, butter (pasteurizedcream, salt), proteicsyrup (sugar, driedeggwhite, naturalfoodcolorings [beta-carotene, saffloweressence, chlorophyll, paprikaessence, caramel, bluespirulinaessence, carmine], pasteurizedwholeegg, raisingagent (sodiumbicarbonate, sodiumbisulphate, cornflour), cocoapowder, crackedginger, cinnamon, vanillin (naturalflavoring), sorbicacid (preservative).

Handmade with nuts, dried fruits and spices. A delicious, fresh tasting traditional Italian fruit cake. A great treat for holidays or gifts!

Oilprime confectionery fats are recommended for the complete replacement of margarines in the formulation of flour confectionery and bakery products, while there is no need to adjust the technological schemes for the production of finished products and the installation of new equipment, but recalculation for fat and dry substances is required. Oilprime is also suitable for the production of fatty fillings and creamy semi-finished products.

Confectionery fats with a high crystallization rate for a wide range of products: fatty fillings for waffles, wafer cakes, rolls, candy fillings, rolls, sandwich cookies, various types of flour confectionery.

Confectionery fats with a trans-isomer content of up to 1%, which have barrier properties. Designed for the production of fillings with a high content of nut raw materials, cream fillings, as well as fillings with a cooling effect. Obtained by fractionation and transesterification methods

The first confectionery fats in Russia with a trans-isomer content of up to 1%, produced by EFKO since 2006. Designed for the production of a wide range of confectionery products: from semi-liquid and soft pasty fillings to hard candy masses such as pralines.

A unique line of hard confectionery fats with a high crystallization rate and heat resistance. Ekond confectionery fats are obtained by high-tech fractionation and are intended for the production of praline masses, jigging sweets, and bars.

The line of shimmer gel food additives Kreda Shimmer (11 colors) to create bright flickering effects for the surface decoration of ice, mastic, marzipan, baking, jelly, chocolate. Apply to the surface with a brush. Can be added to drinks.

One of the fastest and most economical ways to color confectionery products is to paint with an airbrush. Mist paint is used for surface application with a food-grade airbrush, a bottle or bottle equipped with a spray gun built into the neck, and a brush. They have a high covering power. Due to titanium dioxide in the composition, it lays down perfectly evenly, without drops and splashing. The paint allows you to make images and inscriptions of any intensity depending on the number of layers applied, and also creates a uniform velvety matte finish on the surface of the products.

Matte pastry powder or pollen (dry food dye) Velvet KREDA is used for coloring some parts of desserts and other pastry products. It may express some important elements, highlight the contour or spot some details. It makes your flowers or flower petals that are made of cream, chocolate or marzipan look more realistic. How to apply Velvet powder (pollen): 1.Dry application: use a dry brush when applying onto the surface. That would give you mild matte mist effect. Intensity would depend on the number of the layers applied. 2.Liquid application: dilute it with strong alcohol in the ratio of 1 to 2, mix it up and apply onto the surface. That would give you dense matte covering. Intensity of the covering would depend on the number of the layers applied. Velvet is used for base dyeing in mass with fat above 50%. Color depth would depend on the amount of dye. KREDA products and production are certified: EAU, CE: Guarantee for product safety; ISO 22000, HASSP: Guarantee for production safety

Flickering pollen Metallic KREDA is used to make your desserts and other pastry shine. It may express some important elements, highlight the contour or spot some details. You may create unreal unique and totally unusual desserts using the glimmering effect. Add Metallic pollen to some clear drinks and get shimmering effect. No taste and no odor. How to apply Metallic pollen: 1.Dry application: use a dry brush when applying onto the surface. That would give you mild flickering mist effect. 2.Liquid application: dilute it with strong alcohol in the ratio of 1 to 2, mix it up and apply onto the surface. That would give you dense flickering covering. 3.Add Metallic pollen on the bump of a knife into a glass of clear drinks, mix it up until you get the needed effect. 4.Additional area of application is children’s creativity. KREDA products and production are certified: EAU, CE: Guarantee for product safety; ISO 22000, HASSP: Guarantee for production safety

A new economical melanger Allure FM5 is a golden key for enthusiasts homes cooking that will open up new possibilities for you. Melanger Allure FM5 will rightfully take its place next to the multi-cooker.

Melanger Allure FM1 is a real home cook’s assistant! It is a cute and very easy-to-use device that will easily fit even in a small kitchen.

For elimination of air bubbles from chocolate paste. 100%-taste of natural craft chocolate – just as you wish! The Allure VD Vibro-table is intended for the elimination of air bubbles from the chocolate paste. 100% – taste of a natural craft chocolate. Exactly the chocolate you have wanted.

Allure CD3-2020 perfectly splits up both fried and crude cocoa beans making crushed cocoa and releases them from a peel — wella.

IntelleWaferBall is a wafer balls production line. You can also add variety by changing shapes and sizes (animal figures, filling with boiled condensed milk, creams, etc.). It allows producing products with curd, cheese, salad and pate fillings (salty line).

IntelleGlaze is an integral programmable module and can also work as a stand-alone modern glazing and decorating line. In the maximum configuration, it is capable of glazing the product flow divided in half lengthwise in two colors; at the same time, it performs decoration in two other colors. IntelleGlaze glazing equipment includes absolutely everything that is needed for stable, high-quality and reliable glazing and decoration of confectionery and other products for all possible types of glaze, operator actions, and climatic conditions.

Modern rolling machine with heated bins for forming two-component products and products filled with a filler made of marshmallows, biscuits, aerated marmalade, soufflé, and other semi-dense masses. It ranges from delicate meringues, soufflés, and marshmallows to dense masses such as qurabiya dough. You can use it to work with minced meat for gastronomic production! IntelleMix performs the functions of dot depositing, dotted line depositing, as well as a continuous extrusion process (marshmallow sticks, cookie sticks, fondant, etc.).

IntelleStamp is a modern molding and extruding two-component auger-type complex for molding products from dense masses (toffee, nougat, hematogen, choux pastry for pryaniks, soft nut brittle, chilled dense curd mass) with liquid fillings. It allows you to extrude masses with the addition of particles of 3-5 mm (nuts, raisins, candied fruits, etc.).