Rohs-compliant - Import export

The TPS78318DDCT is a low-dropout (LDO) linear voltage regulator from Texas Instruments. It is designed to provide a regulated output voltage of 1.8V with a maximum output current of 150mA. The device features a low quiescent current of only 1.2mA and a low dropout voltage of only 0.2V. It also features a wide input voltage range of 2.7V to 5.5V and a fast transient response

1/8 Unit Load, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers These Intersil RS-485/RS-422 devices are “fractional” unit load (UL), BiCMOS, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Unlike competitive devices, this Intersil family is specified for 10% tolerance supplies (4.5V to 5.5V). • Fractional Unit Load Allows up to 256 Devices on the Bus • Specified for 10% Tolerance Supplies • -7V to +12V Common Mode Input Voltage Range • Three State Rx and Tx Outputs • 30ns Propagation Delays, 5ns Skew (ISL81487) • Half Duplex Pinouts • Operate from a Single +5V Supply (10% Tolerance) • Current Limiting and Thermal Shutdown for Driver Overload Protection • Drop-In Replacements for: MAX487 (ISL8487); MAX1483 (ISL81483); MAX1487, LMS1487 (ISL81487) • Pb-Free Plus Anneal Available (RoHS Compliant)

The Microchip Linear Voltage Regulators MCP1812AT-033/OT are designed to provide a reliable and efficient power supply solution for a variety of applications. This device is a 0.6V @ 300mA over current positive SC-74A SOT-753 voltage regulator. It features a low dropout voltage, low quiescent current, and high power supply rejection ratio. The device also has a wide input voltage range of 2.7V to 6.5V and a wide output voltage range of 0.6V to 5.5V. It is also capable of providing up to 300mA of output current. The device is also designed to be highly efficient, with a typical efficiency of up to 95%. The device is also designed to be highly reliable, with a maximum junction temperature of 150°C. The device is also RoHS compliant and is available in a variety of packages. The Microchip Linear Voltage Regulators MCP1812AT-033/OT are an ideal solution for providing a reliable and efficient power supply solution for a variety of applications.

Dymax MD® 1040M is a versatile autoclave resistant adhesive, coating and encapsulant resistant to numerous cycles of sterilization. Features: -STERRAD and autoclave resistant of 100+ cycles, including nonyellowing - Low water absorption 0.5% - UV/Broad Spectrum and LED curable at 365nm - Compliant with ISO 109935 Cytotoxicity - IBOA free (a known skin irritant) - Compliant with RoHS directives 2015/863/EU - Solvent free

Dymax 2022-MW is a versatile general bonding adhesive, coating, and encapsulant formulated without IBOA (a known skin irritant) and TPO (a material of concern). With its low water absorption of 0.5% and minimized water ingression it is ideal for the assembly or encapsulation of electronic wearable medical device components. Features: - Low water absorprtion: 0.5% - Biocompatible 10993-5 cytotoxicity standards - IBOA Free (designed without isobornyl acrylate) - UV/Broad Spectrum and LED curable at 365nm - Compliant with RoHS directives 2015/863/EU - Superior adhesion to a wide range of substrates - Solvent free

Dymax GA201 forminplace (FIP)/cureinplace (CIP) gasketing resin is formulated for sealing plastic, glass and metal enclosures, and plated surfaces for automotive door handle, appliance housing, and critical electronic assembly and device applications which require a soft, tackfree, flexible gasket. Features: - Cures with UV/Visible light - Moisture resistant - Chemical resistant - Tackfree cure - Soft, durable after complete cure - Conforms to intricate channels and recesses - Compliant with RoHS directives 2015/863/EU

Dymax GA140 forminplace (FIP) and cureinplace (CIP) gasketing resin is formulated for fuel cell, automotive door handle, appliance housing, and critical electronic assembly and device applications which require a soft, tackfree, lowoutgassing, flexible gasket with compression set. Features: - Cures with UV/Visible light - Low outgassing - Cures soft and tack free - Excellent tear resistance - Clear in color - Cures in seconds - Silicone free - Conforms to intricate channels or recesses - Compliant with with RoHS directives 2015/863/EU

Main features • Excellent hole fi lling capability • High clamping force • Excellent tensile strength through large closing head • Excellent shear strength through mandrel locking • Processing with standard setting tools • Process control compatible with the TAURUS® C • RoHS compliant

At Vital Parts we stock a range of Anti Vibration Products covering both Mounts and Buffers across Male or Female thread types. Manufactured from a high quality Rubber and paired with a resistant Zinc Plated Steel we offer the perfect blend between cost efficiency and strength to give you peace of mind. Each material is RoHS compliant and meets all required specifications for use witihin Automotive or Engineering applications.

A miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Wide frequency range. RoHS compliant. This part has been revised, for new designs see EM572T. A miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Wide frequency range. RoHS compliant. Industry-standard SMD package Low phase noise RoHS compliant This part has been revised, for new designs see EM572T

Miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. 'V' group TCXO characteristics. Frequency range 27.0MHz to 200.0MHz. RoHS Compliant. Miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Frequency range 27.0MHz to 200.0MHz. RoHS Compliant.

For new designs see part M572T(kHz). HCMOS TCXO at 32.768kHz or from 20kHz to 50kHz. 7.0 x 5.0mm SMD package. Stability from ±1ppm -30°~+75°C. Part is RoHS compliant. HCMOS TCXO at 32.768kHz or from 20kHz to 50kHz. 7.0 x 5.0mm SMD package. Stability from ±1ppm -30°~+75°C. Part is RoHS compliant. Supply voltage 3.3 or 5.0 Volts Frequency stability from ±1ppm over -30 to +75°C RoHS compliant For new designs see part M572T(kHz)

HCMOS square wave TCXO With ultra-low current consumption, from 2.3mA. The part is packaged in a 7.0 x 5.0mm SMD package. Stability is from ±1ppm -30°~+75°C. Part is RoHS compliant. HCMOS square wave TCXO With ultra-low current consumption, from 2.3mA. Miniaturized 7 x 5mm SMD package Consumes less than 4mA at 20.0MHz with 3.3V supply Low phase noise RoHS compliant The part is packaged in a 7.0 x 5.0mm SMD package. Stability is from ±1ppm -30°~+75°C. Part is RoHS compliant

LVDS output TCXO in 6 pad, 7.0 x 5.0mm SMD package. Frequency range 12MHz to 800MHz. Stability from ±1ppm -30°~+75°C. 'W' Group characteristics. RoHS Compliant. LVDS output TCXO in 6 pad, 7.0 x 5.0mm SMD package. Frequency range 12MHz to 800MHz. Stability from ±1ppm -30°~+75°C. W' Group characteristics. RoHS Compliant

A miniature 4 pad SMD TCXO in a 5.0 x 3.2 x 1.3mm package. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Frequency range from 6.4MHz to 40.0MHz. Supply voltage of 2.5V, 3.0V, 3.3 Volts. RoHS compliant. Low cost TCXO with short delivery A miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Wide frequency range: 6.4MHz to 40.0MHz Supply voltage 2.5, 3.0 or 3.3 Volts RoHS compliant Wide frequency range. RoHS compliant. High spec with low cost. Quick delivery

A miniature 4 pad SMD TCXO in a 7.0 x 5.0mm package. Stability from ±0.5ppm. HCMOS square wave output. Frequency range from 40MHz to 156.0MHz. Supply voltage of 2.5V, 3.0V or 3.3 A miniature 4 pad SMD TCXO (EML572T) or VCTCXO (VEML572T). Stability from ±0.5ppm. HCMOS square wave output. RoHS compliant. Volts. RoHS compliant. For frequencies 1.56MHz to 40MHz see part EM572T. For a CMOS TCXO from 1.56MHz to 40MHz see part EM572T.

LVDS output TCXO in 6 pad, 7.0 x 5.0mm SMD package. Frequency range 12MHz to 800MHz. Stability from ±1ppm -30°~+75°C. LVDS 'F' Group characteristics. RoHS Compliant. TCXO with LVDS output, 6 pad, 7 x 5mm SMD. Stability from ±1ppm -30°~+75°C. Miniature 7 x 5 x 2.8mm ceramic SMD package Supply voltage 3.3 Volts Low cost, low jitter for general applications RoHS compliant 'F' Group characteristics. Frequency Range 38.880MHz to 432.0MHz.

SMD crystal, AT-Cut in 92SMX package. Operation over -40° to +125°C Temperature range -40° to +125°C available Resistance weld, hermetically sealed package Fully RoHS compliant Frequncy range 3.579545MHz to 30.0MHz

HCMOS TCXO at 32.768kHz or from 20kHz to 50kHz. 7.0 x 5.0mm SMD package. Stability from ±1ppm -30°~+75°C Miniature 7 x 5 x 2.3mm SMD package Frequency range: 20.0kHz to 52.7kHz including 32.768kHz Supply voltage +3.3 Volts Frequency stability from ±1ppm over -30 to +75°C RoHS compliant

PECL output TCXO in 6 pad, 7.0 x 5.0mm SMD package. Frequency range 10MHz to 800MHz. Stability from ±1ppm -30°~+75°C. 'F' Group characteristics.RoHS Compliant. TCXO PECL output, 6 pad, 7 x 5mm SMD. Stability from ±1ppm -30°~+75°C. PECL square wave output. PECL 'F' Group characteristics. Supply voltage 3.3 Volts Less than 1ps phase jitter, ideal for SONET, xDSL RoHS compliant requency Range 38.880MHz to 432.0MHz

A low power, (current consumption 0.79µA at 1.8V supply) 32.768kHz TCXO. Frequency stability ±5ppm over -40° to +85°C. Low power (0.79µA current consumption at 1.8V) 32.768kHz TCXO. Miniature 3.28 x 2.5mm SMD package Supply voltage 1.8, 2.5, 3.0, 3.3 or 5.0 Volts Frequency stability from ±2ppm over 0 to +50°C RoHS compliant Frequency stability from ±2ppm over 0° to +50°C

A miniature 4 pad SMD TCXO (EM572T) or VCTCXO (VEM572T). Stability from ±0.5ppm. HCMOS square wave output. RoHS compliant. For a CMOS TCXO from 40MHz to 156MHz see part EML572T. A miniature 4 pad SMD TCXO (EM572T) or VCTCXO (VEM572T). Stability from ±0.5ppm. HCMOS square wave output. Frequency range: 1.25MHz to 40.0MHz Supply voltage 2.5, 3.0 or 3.3 Volts For a CMOS TCXO from 40MHz to 156MHz see part EML572T

A 14 pin Dual-in-Line TCXO. Stability from ±1ppm over -30° ~ +75°C. HCMOS square wave output. Wide frequency range 1.25MHz to 156.0MHz. 14 pin DIL through-hole TCXO without trimmer. Stability from ±1ppm -30°~+75°C. 14 pin DIL industry-standard package Wide frequency range: 1.25MHz to 156.0MHz Supply voltage 2.5, 3.0 or 3.3 Volts RoHS compliant CMOS square wave output. Wide frequency range

A micro-miniature CMOS, 4 pad SMD TCXO in a 3.2 x 2.5 x 1.3mm package. Stability from ±1ppm -40°~+85°C. Frequency range from 8.192MHz to 40.0MHz. Supply voltage 1.8V, 2.5V, 3.0V & 3.3V. RoHS and REACH compliant. Low cost TCXO with short delivery lead time. A micro-miniature CMOS, 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. RoHS and REACH compliant. Frequency range: 8.192MHz to 40.0MHz Supply voltage: 1.8V, 2.5V, 3.0V & 3.3 Volts Frequency stability from ±1ppm over -40 to +85°C RoHS compliant.High spec with low cost. Quick delivery.

An ultra-miniature, 2.5 x 2.0 x 0.8mm SMD, clipped sinewave-output TCXO. Excellent temperature stability, from ±0.5ppm. Output level 0.8V p-p minimum into a 10k Ohms //10pF load. RoHS and REACH Compliant. Frequency range 13MHz to 52MHz. Miniature SMD TCXO with good specification. Stability from ±0.5ppm over -20° to +70°C Supply Voltage 1.8V, 2.5V or 3.0Volts Miniature, lightweight and compact Ideal for portable devices such as GPS and handsets Frequency range 13MHz to 52MHz, tolerance from ±0.5ppm. Output 0.8V p-p minimum into a 10k Ohms //10pF load