Range - Import export

HCMOS TCXO at 32.768kHz or from 20kHz to 50kHz. 7.0 x 5.0mm SMD package. Stability from ±1ppm -30°~+75°C Miniature 7 x 5 x 2.3mm SMD package Frequency range: 20.0kHz to 52.7kHz including 32.768kHz Supply voltage +3.3 Volts Frequency stability from ±1ppm over -30 to +75°C RoHS compliant

With our design perception that integrates creativity with architectural perspective, we are always with you for more effective advertising and special solutions for your company. We provide to our costumers special design, production and application support to our customers in more than 10 service branches, including fun theme parks, 3-D advertising dummy and mock-ups, educational modeling, sculpture production, decor applications for cinema and series sector, stage design, urban furniture and product promotion stands.

We are glad to offer you a wide range of used parts originals for Audi, BMW, Mercedes, Infiniti, Jaguar, Lexus, Land Rover, Porsche, VW. The door is used and has normal signs of road wear. If you have any further questions, just write. Original manufactured, not an aftermarket part. Thank you for looking.

Designed with the most advanced technology, CVS Plants are highly efficient equipment, prepared to respond to the daily challenges of professionals in the agri-food industry. Incorporating an electropump produced with the best current technology, entirely made of amagnetic stainless steel, it was built to work in continuous service with virtually no maintenance. We have developed a range of Fixed and Portable solutions with different models designed to cover the entire spectrum of possibilities.

Planar ceramic heater oxygen sensors are subject to extreme conditions. A properly functioning oxygen sensor forms the basis for reliable engine operation and thus fuel economy, low pollutant emissions, and good exhaust gas values. Oxygen sensors with planar ceramic heater characteristics: ● Quick ignition time ● Good insulation performance ● Strong resistance to high temperature and poisoning ● Long lifetime ● Pump current switch type, conventional switch type, air-fuel ration type, and wide range type are available Appliaction: Plate Ceramic Heater Chip for Automobile / Oxygen Sensor

Shooting range soundproofing is an important issue, especially for nearby residences or businesses. High decibel levels from shooting ranges can cause discomfort to people nearby and even cause hearing damage. Therefore, shooting range soundproofing is both a legal and ethical requirement. The appropriate selection of materials for shooting range soundproofing consists of materials that can withstand high temperatures and humidity, as well as have high density and acoustic properties. In addition, it is also important to use correct techniques and place insulation materials correctly during insulation application.

The professional ovens of the Medium Duty line are expressly designed for the rapid cooking and/or regeneration of a variety of foods in a simple and rapid way. In addition to the high technological and qualitative level, this range is also extremely competitive from an economic point of view.

The professional ovens of the Medium Duty line are expressly designed for the rapid cooking and/or regeneration of a variety of foods in a simple and rapid way. In addition to the high technological and qualitative level, this range is also extremely competitive from an economic point of view.

The semi-professional combined models of the Light Duty line are designed for rapid cooking but at a temperature that is not too high, in order to create the most favorable conditions for the preparation of multiple dishes and recipes developed quickly.

The semi-professional combined models of the Light Duty line are designed for rapid cooking but at a temperature that is not too high, in order to create the most favorable conditions for the preparation of multiple dishes and recipes developed quickly.

Discover the most efficient solution for any slab terrace installation. The UNIKA pedestal is height-adjustable from 30 to 40 mm. It can be raised to a height of up to 1 meter using the extension accessory. The height can be easily adjusted to the nearest millimeter using the adjustment ring: from the top by using the YEED Tightening key, or manually from the side. The UNIKA pedestal is an all-in-one revolution. the noise buffer accessory is integrated directly onto the pedestal head, and the red clamping ring makes the head self-levelling or fixed.

Découvrez la solution qui vous facilitera toute installation de terrasse bois ou composite. Le plot UNIKA pour lambourde est réglable de 30 à 40 mm, au millimètre près et facilement grâce à la bague de réglage : par le dessus avec la clé de serrage ou bien manuellement sur le côté. Il dispose de 2 languettes qui s’adaptent parfaitement à toute taille de lambourde bois, composite ou aluminium. Le plot UNIKA est une révolution du tout-en-un : Grâce à la bague de serrage rouge, la tête devient autonivelante ou reste fixe. In addition, thanks to the red clamping screw, the head becomes self-leveling or remains fixed.

Discover the solution to any height problem on your building site. With UNIKA height-adjustable pedestals, you have all sizes at your fingertips. The 60 mm extension increases the final height of the UNIKA 40/60 mm adjustable pedestal.

Discover the solution to any height problem on your building site. With UNIKA height-adjustable pedestals, you have all sizes at your fingertips. The 20 mm extension increases the final height of the UNIKA 40/60 mm adjustable pedestal.

Discover the most efficient solution for any slab terrace installation. The UNIKA pedestal is height-adjustable from 40 to 60 mm. It can be raised to a height of up to 1 meter using the extension accessory. The height can be easily adjusted to the nearest millimeter using the adjustment ring: from the top by using the YEED Tightening key, or manually from the side. The UNIKA pedestal is an all-in-one revolution. the noise buffer accessory is integrated directly onto the pedestal head, and the red clamping ring makes the head self-levelling or fixed.

Turning to dia. 250mm / 350mm / 400mm Milling small size max. 450x550x600 mm large size max. 1000x3000x10000 mm Horizontal Boring Machine small size max. 1600 / 1200 mm large size max. 2500 / 1800 mm Carousel – max. dia. 2250/2500mm, height 1500mm Straight Grinding max. 3000×400 mm Round Grinding max. dia. 320 ×1000 mm

The IST AG 600 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +600 °C.​ The sensors are a standard solution for various temperature applications. The RTDs are suitable for welding, crimping and brazing. Furthermore, the 600 °C Pt Temperature Sensor Series is vibration and temperature shock resistant and can be customized to fit application-specific requirements. ​The IST AG Pt temperature sensors up to 600 °C are also available with: — Paired sensors — 1/5 IEC and 1/10 IEC accuracy — Small dimensions

The IST AG 400 °C Pt Temperature Sensor Series offers an excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +400 °C.​ The sensors are vibration and temperature shock resistant and offer excellent solderability. The standard 400 °C Pt Temperature Sensor Series is supplied with Ag-wires. Due to the wire material characteristics, the long directly welded Ag-wire shows very little impact on the sensor accuracy. Furthermore, the 400 °C Pt Temperature Sensor Series can be customized to fit application-specific requirements e.g. PTFE-insulation tubes. ​The IST AG Pt temperature sensors up to 400 °C are also available with: — Paired and grouped sensors — 1/5 IEC and 1/10 IEC accuracy — 2-, 3- and 4-wire configuration — Grain-stabilized Ag-wire

The IST AG 600 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +600 °C.​ The sensors are a standard solution for various temperature applications. The RTDs are suitable for welding, crimping and brazing. Furthermore, the 600 °C Pt Temperature Sensor Series is vibration and temperature shock resistant and can be customized to fit application-specific requirements. ​The IST AG Pt temperature sensors up to 600 °C are also available with: — Paired sensors — 1/5 IEC and 1/10 IEC accuracy — Small dimensions

The IST AG 150 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -50 °C to +150 °C. ​The sensors are developed with an insulated enameled Cu-wire, which enables easy integrating into applications. The insulation is additionally removed at the end of the wire to enable easy welding or soldering. Due to the small diameter of the enameled Cu-wire (Ø 0.2 mm), the temperature sensor is offered with extremely small dimensions (see "characteristics" for more information about small dimensions) and with long, directly welded wires. Furthermore, the 150 °C Pt Temperature Sensor Series can be customized to fit application-specific requirements e.g. wire lengths. ​The IST AG Pt temperature sensors up to 150 °C are also available with: — Metallized backside — Long insulated wires (enameled) — 2-, 3- and 4-wire configuration

The IST AG 150 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -50 °C to +150 °C. ​The sensors are developed with an insulated enameled Cu-wire, which enables easy integrating into applications. The insulation is additionally removed at the end of the wire to enable easy welding or soldering. Due to the small diameter of the enameled Cu-wire (Ø 0.2 mm), the temperature sensor is offered with extremely small dimensions (see "characteristics" for more information about small dimensions) and with long, directly welded wires. Furthermore, the 150 °C Pt Temperature Sensor Series can be customized to fit application-specific requirements e.g. wire lengths. ​The IST AG Pt temperature sensors up to 150 °C are also available with: — Metallized backside — Long insulated wires (enameled) — 2-, 3- and 4-wire configuration

The IST AG 600 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +600 °C.​ The sensors are a standard solution for various temperature applications. The RTDs are suitable for welding, crimping and brazing. Furthermore, the 600 °C Pt Temperature Sensor Series is vibration and temperature shock resistant and can be customized to fit application-specific requirements. ​The IST AG Pt temperature sensors up to 600 °C are also available with: — Paired sensors — 1/5 IEC and 1/10 IEC accuracy — Small dimensions

The IST AG 600 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +600 °C.​ The sensors are a standard solution for various temperature applications. The RTDs are suitable for welding, crimping and brazing. Furthermore, the 600 °C Pt Temperature Sensor Series is vibration and temperature shock resistant and can be customized to fit application-specific requirements. ​The IST AG Pt temperature sensors up to 600 °C are also available with: — Paired sensors — 1/5 IEC and 1/10 IEC accuracy — Small dimensions

The IST AG 600 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +600 °C.​ The sensors are a standard solution for various temperature applications. The RTDs are suitable for welding, crimping and brazing. Furthermore, the 600 °C Pt Temperature Sensor Series is vibration and temperature shock resistant and can be customized to fit application-specific requirements. ​The IST AG Pt temperature sensors up to 600 °C are also available with: — Paired sensors — 1/5 IEC and 1/10 IEC accuracy — Small dimensions

The IST AG 150 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -50 °C to +150 °C. ​The sensors are developed with an insulated enameled Cu-wire, which enables easy integrating into applications. The insulation is additionally removed at the end of the wire to enable easy welding or soldering. Due to the small diameter of the enameled Cu-wire (Ø 0.2 mm), the temperature sensor is offered with extremely small dimensions (see "characteristics" for more information about small dimensions) and with long, directly welded wires. Furthermore, the 150 °C Pt Temperature Sensor Series can be customized to fit application-specific requirements e.g. wire lengths. ​The IST AG Pt temperature sensors up to 150 °C are also available with: — Metallized backside — Long insulated wires (enameled) — 2-, 3- and 4-wire configuration