Protection devices - Import export

NSPV surge protective device DC SPD protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.High energy MOVs equipped with specific thermal disconnectors and related failure indicators.

NSPV surge protective device AC Surge protection device(SPD) is an indispensable device for lightning protection of electronic equipment. It is used to limit the instantaneous overvoltage of the power line and signal transmission line to the voltage range that the equipment or system can withstand, or A powerful lightning current drains into the ground to protect the protected equipment or system from impact and damage.

Enjoy the versatility of USB Type-C compatible cables. You can use different types of cables to charge the different mobile devices you have. Just plug in the cable - no need to change the charger in the socket. Charge your devices the way they deserve. Enjoy fast 15W charging for USB-C devices that support a variety of technologies. Protect your devices against overload, short circuit and high temperature. Charge them safely even in unstable electrical conditions without worrying about interference and leakage current.

Baseus 10000 mAh power bank. Supports output current with a maximum power of 30W. It supports many standards of fast charging, e.g. SCP, Quick Charge 3.0, Power Delivery 3.0. It has built-in 2 USB output ports and a USB Type C input/output port (for charging phones and the powerbank itself). The LED screen on its housing indicates the battery charge level. The IC supports multiple protections that protect connected devices from damage

Baseus 10000 mAh power bank. Supports output current with a maximum power of 30W. It supports many standards of fast charging, e.g. SCP, Quick Charge 3.0, Power Delivery 3.0. It has built-in 2 USB output ports and a USB Type C input/output port (for charging phones and the powerbank itself). The LED screen on its housing indicates the battery charge level. The IC supports multiple protections that protect connected devices from damage.

The Dudao 3-in-1 charger is an intelligent technological solution adapted to safe charging. Thanks to the applied solutions, it guarantees the safety and protection of electronic devices against the effects of overvoltage or overheating. Independent coils favor charging three devices simultaneously without mutual interference. The advantage of the model is also the immediate reaction within 0.1 seconds after placing the device in the charger.

The Hinovo powerbank is a useful gadget with MagSafe or Qi wireless charging. The product achieves wireless charging with a maximum power of 15W. This allows any compatible device to be charged effectively. The powerbank can be charged via the USB-C port, which supports power up to 20W, which gives us about 3 hours of charging from 0% to 100%. The housing is made of non-slip ABS, which increases safety and prevents it from slipping out of your hand. In addition, protection against overheating of the device and a cooling system have been built in. The gadget is small in size and ideal for taking it with you on a trip to a backpack or handbag.

The Hinovo powerbank is a useful gadget with MagSafe or Qi wireless charging. The product achieves wireless charging with a maximum power of 15W. This allows any compatible device to be charged effectively. The powerbank can be charged via the USB-C port, which supports power up to 20W, which gives us about 3 hours of charging from 0% to 100%. The housing is made of non-slip ABS, which increases safety and prevents it from slipping out of your hand. In addition, protection against overheating of the device and a cooling system have been built in. The gadget is small in size and ideal for taking it with you on a trip to a backpack or handbag.

We ensure that your facilities are compliant with the latest legal requirements in terms of safety: Mechanical protection devices: grids, grills, gratings, doors, locks, securing with mechanical interlocks, etc. Electrical protection devices: sensors, optoelectronic protective equipment, proximity sensors, encoders, identifiers (laser readers, camera readers, etc.), safety switches, securing with electrical interlocks, etc. machine guarding: stainless steel, steel, etc. Immaterial protection equipment: photoelectric barriers, passages and controlled access with a scanner, etc. Hearing protectors Gas detectors and analysers in compliance with the national and European standards in force. Our comprehensive services include: certificates of incorporation for machines complete technical documentation controls by competent independent organisations

Cover for mobile device camera to protect privacy. In a wide range of tones, with 3M reusable adhesive. Adhesive

Here at Knight Optical, we understand that there is no one size fits all for your optical component specifications. That is why – as well as edging down our stock optics – we also offer our entire range as custom-made components. This bespoke option is popular across a variety of sectors such as defence and aerospace, medical and research as well as engineering and manufacturing industries; to name a few. By opting for our customised service, not only will you be able to choose the material, millimetre-perfect dimensions and thicknesses best suited to your application, but you will also be able to pick appropriate optical coatings to protect or enhance your device's operability. If you would like to discuss your optical requirements with a member of our team or to find out more about our custom-made optics, please get in touch on +44 (0)1622 859444, choose option One. Alternatively, click here to view our full range of custom-made optics.

The stationary amphibian barrier made of recycled plastic is an effective protective device to prevent amphibians from crossing roads all year round.

NSPV MCCB DC The moulded case circuit breaker has the protection devices of over load, short circuit and under voltage, it can protect the circuit and power equipment from broken. The MCCB has the features of small volume, high breaking capacity, short electric arcing and anti-vibration. It is the ideal product for application in land and ship.

NSPV MCCB DC The moulded case circuit breaker has the protection devices of over load, short circuit and under voltage, it can protect the circuit and power equipment from broken. The MCCB has the features of small volume, high breaking capacity, short electric arcing and anti-vibration. It is the ideal product for application in land and ship.

Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.

Today, accuracy and precision have become essential factors in all industries and applications, from woodworking, DIY, and mechanics, to construction sites, manufacturing, etc. people need more accuracy in their projects and minimize their errors. There are various measuring tools in the industry, and one of their more precise ones is laser levels. Ronix laser levels are water and dust-proof and can be set up effortlessly to project horizontal and vertical lines with red beams. They also come with some rubber parts that protect the device from damage.

Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.

The demand for aluminum is constantly increasing due to its special technical properties. It can be made thinner and thinner as the strength increases. This is accompanied by tight manufacturing tolerances, which require measurement technology with more precision. As a manufacturer of measuring systems for the aluminum industry, Micro-Epsilon offers a comprehensive portfolio based on optical sensors without radioactivity that ensures More Precision in applications regardless of complexity and material properties. Optimized sensor technology tailored to the respective application, innovative mechanical design, as well as cooling and protection devices enable the systems to meet the needs of the processes. The high-performance signal processing and analysis software makes the systems the leading optical gauges on the market which detect the following parameters

Iron and steel represent a fundamental pillar in industrial production. Precision in the production process of metal plates, sheets and coils is crucial to the efficient use of scarce resources and economic success. As a manufacturer of measuring systems for the steel industry based on optical sensors, Micro-Epsilon offers a comprehensive portfolio without radioactivity that ensures More Precision in all applications regardless of complexity and material properties. With optimized sensor technology tailored to the respective application, innovative mechanical design, as well as cooling and protective devices, the systems meet the challenges of the processes. The high-performance signal processing and analysis software makes the systems the leading optical measuring systems on the market which detect the following parameters

WIDE RANGE OF TANK ACCESSORIES FOR TECHNICAL EQUIPMENT Whether grain silos, biogas systems or liquid manure containers, Lipp places the greatest importance on quality, safety, a long service life and cost efficiency over its entire product portfolio – including accessories. The whole is more than the sum of its parts. That is especially true for Lipp container solutions and systems as special attention is paid to all parts – including tank accessories – to ensure quality, safety, longevity and cost efficiency. A broad range of technical tank accessories is available for all containers. Some are produced in house and some are purchased via partners or carefully selected suppliers with whom Lipp has established long term relationships based on trust. ACCESSORIES Container bottoms Container insulation Pumping and stirring technology Overflow gutters Container heating Steps, platforms and operating bridges Overpressure and underpressure protection devices Pipeline construction

LIPP® Tank Accessories special attention is paid to ensure quality, safety, longevity and cost efficiency. Solid, well thoughtout finishing in every detail. Particular attention is paid to leaktightness. Openings or leadthroughs can also easily be made after attachment/installation. A broad range of technical tank accessories is available for all containers. Some are produced inhouse and some are purchased via partners or carefully selected suppliers with whom Lipp has established longterm relationships based on trust. Accessories tank bottom, tank insulation, pumping and stirring technology, overflow gutters, tank heating, steps, platforms, operating bridges, overpressure and underpressure protection devices, pipeline construction, sensors, etc.

Housing, die-cast zinc. Housing cover, plastic, self-extinguishing. Hinge bolts, die-cast zinc/steel C45. Contacts, silver-nickel alloy 10. Note: The security hinge switches are used for monitoring the position of swing-hinged safety doors, protective hatches and hoods. The protective device is monitored directly in the hinge. By the universally pre-set versions, the switching angle is freely adjustable over the entire working range. A mounting aid ensures the quick alignment to doors and posts. The additional hinges have the same appearance and dimensions as the security hinge switches. The loading values given for the hinges are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties.

Today, accuracy and precision have become essential factors in all industries and applications, from woodworking, DIY, and mechanics, to construction sites, manufacturing, etc. people need more accuracy in their projects and minimize their errors. There are various measuring tools in the industry, and one of their more precise ones is laser levels. Ronix laser levels are water and dust-proof and can be set up effortlessly to project horizontal and vertical lines with green beams. They also come with some rubber parts that protect the device from damage. Ronix RH-9503G is a cross-line laser level with a Self-leveling system compensating for minor angular misalignments of ± 3° automatically. This measuring tool is applicable for all indoor and outdoor tasks, such as leveling floors, installing drop ceilings, installing chair rails and wainscoting, aligning shelves, cabinets and trim, masonry alignment, land elevations, etc.

Ex-Solenoid with Ignition Protection Type „Increased Safety”, Ex “e”. The explosion-proof solenoid convince through high forces, dynamic switching and long service life. It consists of a pot magnet and an aluminium connector housing. According to EN 60079 the connector housing provides a connection for the protective conductor. The linear solenoid comply with the European ATEX guideline 2014/34/EU for devices and protection systems intended for proper use in explosive areas and can be used in temperature class T4 (up to +135°C). It is supplied with 24 V DC as standard, other voltages are available on request.

Ex-Solenoid with Ignition Protection Type „Increased Safety”, Ex “e”. The explosion-proof solenoid convince through high forces, dynamic switching and long service life. It consists of a pot magnet and an aluminium connector housing. According to EN 60079 the connector housing provides a connection for the protective conductor. The linear solenoid comply with the European ATEX guideline 2014/34/EU for devices and protection systems intended for proper use in explosive areas and can be used in temperature class T4 (up to +135°C). It is supplied with 24 V DC as standard, other voltages are available on request.

Ensure metered dose integrity and accuracy in oral inhalers Customized POREX ® inhaler filters are used in metered dose inhalers to deliver measured amounts of pharmaceutical agents to patients via oral-bronchial administration. With the added ability for customization to promote preservative-free packaging, our oral inhaler filters: Deliver accurate doses in metered dose inhalers–Customized inhaler filters facilitate the delivery of measured amounts of pharmaceutical agents specific to the device’s design requirements. Protects inhaler's mechanical systems from obstruction, thereby enhancing performance. Can be customized based on device requirements by optimizing for pore size, airflow and dimensional tolerances.

Ensure metered dose integrity and accuracy in oral inhalers Customized POREX ® inhaler filters are used in metered dose inhalers to deliver measured amounts of pharmaceutical agents to patients via oral-bronchial administration. With the added ability for customization to promote preservative-free packaging, our oral inhaler filters: Deliver accurate doses in metered dose inhalers–Customized inhaler filters facilitate the delivery of measured amounts of pharmaceutical agents specific to the device’s design requirements. Protects inhaler's mechanical systems from obstruction, thereby enhancing performance. Can be customized based on device requirements by optimizing for pore size, airflow and dimensional tolerances.

Kaplan turbines are typically used for river power plants on calm waters. The blade angle runner blades (Kaplan blades) is adjustable. The pressure of the water flow, which is controlled by the guide vanes of the upstream wicker gate, can then be efficiently converted into energy. The bidirectional MANOY® system seal WP, type 444, in the form of a continuous ring was developed to protect the hydraulic adjustment device and prevent hydraulic fluid leakage. Type 449 is particularly useful for maintenance work because rather than being continuous in circumference, the seal is open and has a guide blade.

Ensure metered dose integrity and accuracy in oral inhalers Customized POREX ® inhaler filters are used in metered dose inhalers to deliver measured amounts of pharmaceutical agents to patients via oral-bronchial administration. With the added ability for customization to promote preservative-free packaging, our oral inhaler filters: Deliver accurate doses in metered dose inhalers–Customized inhaler filters facilitate the delivery of measured amounts of pharmaceutical agents specific to the device’s design requirements. Protects inhaler's mechanical systems from obstruction, thereby enhancing performance. Can be customized based on device requirements by optimizing for pore size, airflow and dimensional tolerances.