Protection devices - Import export

NSPV surge protective device DC SPD protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.High energy MOVs equipped with specific thermal disconnectors and related failure indicators.

NSPV surge protective device AC Surge protection device(SPD) is an indispensable device for lightning protection of electronic equipment. It is used to limit the instantaneous overvoltage of the power line and signal transmission line to the voltage range that the equipment or system can withstand, or A powerful lightning current drains into the ground to protect the protected equipment or system from impact and damage.

We ensure that your facilities are compliant with the latest legal requirements in terms of safety: Mechanical protection devices: grids, grills, gratings, doors, locks, securing with mechanical interlocks, etc. Electrical protection devices: sensors, optoelectronic protective equipment, proximity sensors, encoders, identifiers (laser readers, camera readers, etc.), safety switches, securing with electrical interlocks, etc. machine guarding: stainless steel, steel, etc. Immaterial protection equipment: photoelectric barriers, passages and controlled access with a scanner, etc. Hearing protectors Gas detectors and analysers in compliance with the national and European standards in force. Our comprehensive services include: certificates of incorporation for machines complete technical documentation controls by competent independent organisations

Customized protective covers for each type of gripper (X gripper, Z gripper, etc.). Thanks to the modular design of the protective cover, adaptation is quick and simple with cost savings due to partial replacement of the protective device. Different types of fabrics used for optimal protection of each part of the welding gripper. Highly resistant protective robot covers that are silicone-free, halogen-free, non-flammable, quickly mountable and removable, ideal for welding. Access to the gripper preserved: for maintenance operations, the cover can be removed in a flash. Integrated plastron in the cover: optimized protection on the side exposed to heavy spatter With ASP’s CMC gripper cover, you can protect all your welding grippers with a limited number of low-cost items Robot covers reduce maintenance costs for your robot welding grippers Less downtime for protected robots and longer lifespan.

Here at Knight Optical, we understand that there is no one size fits all for your optical component specifications. That is why – as well as edging down our stock optics – we also offer our entire range as custom-made components. This bespoke option is popular across a variety of sectors such as defence and aerospace, medical and research as well as engineering and manufacturing industries; to name a few. By opting for our customised service, not only will you be able to choose the material, millimetre-perfect dimensions and thicknesses best suited to your application, but you will also be able to pick appropriate optical coatings to protect or enhance your device's operability. If you would like to discuss your optical requirements with a member of our team or to find out more about our custom-made optics, please get in touch on +44 (0)1622 859444, choose option One. Alternatively, click here to view our full range of custom-made optics.

NSPV MCCB DC The moulded case circuit breaker has the protection devices of over load, short circuit and under voltage, it can protect the circuit and power equipment from broken. The MCCB has the features of small volume, high breaking capacity, short electric arcing and anti-vibration. It is the ideal product for application in land and ship.

NSPV MCCB DC The moulded case circuit breaker has the protection devices of over load, short circuit and under voltage, it can protect the circuit and power equipment from broken. The MCCB has the features of small volume, high breaking capacity, short electric arcing and anti-vibration. It is the ideal product for application in land and ship.

Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.

LIPP® Tank Accessories special attention is paid to ensure quality, safety, longevity and cost efficiency. Solid, well thoughtout finishing in every detail. Particular attention is paid to leaktightness. Openings or leadthroughs can also easily be made after attachment/installation. A broad range of technical tank accessories is available for all containers. Some are produced inhouse and some are purchased via partners or carefully selected suppliers with whom Lipp has established longterm relationships based on trust. Accessories tank bottom, tank insulation, pumping and stirring technology, overflow gutters, tank heating, steps, platforms, operating bridges, overpressure and underpressure protection devices, pipeline construction, sensors, etc.

Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.

Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.

The demand for aluminum is constantly increasing due to its special technical properties. It can be made thinner and thinner as the strength increases. This is accompanied by tight manufacturing tolerances, which require measurement technology with more precision. As a manufacturer of measuring systems for the aluminum industry, Micro-Epsilon offers a comprehensive portfolio based on optical sensors without radioactivity that ensures More Precision in applications regardless of complexity and material properties. Optimized sensor technology tailored to the respective application, innovative mechanical design, as well as cooling and protection devices enable the systems to meet the needs of the processes. The high-performance signal processing and analysis software makes the systems the leading optical gauges on the market which detect the following parameters

Iron and steel represent a fundamental pillar in industrial production. Precision in the production process of metal plates, sheets and coils is crucial to the efficient use of scarce resources and economic success. As a manufacturer of measuring systems for the steel industry based on optical sensors, Micro-Epsilon offers a comprehensive portfolio without radioactivity that ensures More Precision in all applications regardless of complexity and material properties. With optimized sensor technology tailored to the respective application, innovative mechanical design, as well as cooling and protective devices, the systems meet the challenges of the processes. The high-performance signal processing and analysis software makes the systems the leading optical measuring systems on the market which detect the following parameters

WIDE RANGE OF TANK ACCESSORIES FOR TECHNICAL EQUIPMENT Whether grain silos, biogas systems or liquid manure containers, Lipp places the greatest importance on quality, safety, a long service life and cost efficiency over its entire product portfolio – including accessories. The whole is more than the sum of its parts. That is especially true for Lipp container solutions and systems as special attention is paid to all parts – including tank accessories – to ensure quality, safety, longevity and cost efficiency. A broad range of technical tank accessories is available for all containers. Some are produced in house and some are purchased via partners or carefully selected suppliers with whom Lipp has established long term relationships based on trust. ACCESSORIES Container bottoms Container insulation Pumping and stirring technology Overflow gutters Container heating Steps, platforms and operating bridges Overpressure and underpressure protection devices Pipeline construction

Housing, die-cast zinc. Housing cover, plastic, self-extinguishing. Hinge bolts, die-cast zinc/steel C45. Contacts, silver-nickel alloy 10. Note: The security hinge switches are used for monitoring the position of swing-hinged safety doors, protective hatches and hoods. The protective device is monitored directly in the hinge. By the universally pre-set versions, the switching angle is freely adjustable over the entire working range. A mounting aid ensures the quick alignment to doors and posts. The additional hinges have the same appearance and dimensions as the security hinge switches. The loading values given for the hinges are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties.

Ex-Solenoid with Ignition Protection Type „Increased Safety”, Ex “e”. The explosion-proof solenoid convince through high forces, dynamic switching and long service life. It consists of a pot magnet and an aluminium connector housing. According to EN 60079 the connector housing provides a connection for the protective conductor. The linear solenoid comply with the European ATEX guideline 2014/34/EU for devices and protection systems intended for proper use in explosive areas and can be used in temperature class T4 (up to +135°C). It is supplied with 24 V DC as standard, other voltages are available on request.

Ex-Solenoid with Ignition Protection Type „Increased Safety”, Ex “e”. The explosion-proof solenoid convince through high forces, dynamic switching and long service life. It consists of a pot magnet and an aluminium connector housing. According to EN 60079 the connector housing provides a connection for the protective conductor. The linear solenoid comply with the European ATEX guideline 2014/34/EU for devices and protection systems intended for proper use in explosive areas and can be used in temperature class T4 (up to +135°C). It is supplied with 24 V DC as standard, other voltages are available on request.

Ensure metered dose integrity and accuracy in oral inhalers Customized POREX ® inhaler filters are used in metered dose inhalers to deliver measured amounts of pharmaceutical agents to patients via oral-bronchial administration. With the added ability for customization to promote preservative-free packaging, our oral inhaler filters: Deliver accurate doses in metered dose inhalers–Customized inhaler filters facilitate the delivery of measured amounts of pharmaceutical agents specific to the device’s design requirements. Protects inhaler's mechanical systems from obstruction, thereby enhancing performance. Can be customized based on device requirements by optimizing for pore size, airflow and dimensional tolerances.

Ensure metered dose integrity and accuracy in oral inhalers Customized POREX ® inhaler filters are used in metered dose inhalers to deliver measured amounts of pharmaceutical agents to patients via oral-bronchial administration. With the added ability for customization to promote preservative-free packaging, our oral inhaler filters: Deliver accurate doses in metered dose inhalers–Customized inhaler filters facilitate the delivery of measured amounts of pharmaceutical agents specific to the device’s design requirements. Protects inhaler's mechanical systems from obstruction, thereby enhancing performance. Can be customized based on device requirements by optimizing for pore size, airflow and dimensional tolerances.

Kaplan turbines are typically used for river power plants on calm waters. The blade angle runner blades (Kaplan blades) is adjustable. The pressure of the water flow, which is controlled by the guide vanes of the upstream wicker gate, can then be efficiently converted into energy. The bidirectional MANOY® system seal WP, type 444, in the form of a continuous ring was developed to protect the hydraulic adjustment device and prevent hydraulic fluid leakage. Type 449 is particularly useful for maintenance work because rather than being continuous in circumference, the seal is open and has a guide blade.

Ensure metered dose integrity and accuracy in oral inhalers Customized POREX ® inhaler filters are used in metered dose inhalers to deliver measured amounts of pharmaceutical agents to patients via oral-bronchial administration. With the added ability for customization to promote preservative-free packaging, our oral inhaler filters: Deliver accurate doses in metered dose inhalers–Customized inhaler filters facilitate the delivery of measured amounts of pharmaceutical agents specific to the device’s design requirements. Protects inhaler's mechanical systems from obstruction, thereby enhancing performance. Can be customized based on device requirements by optimizing for pore size, airflow and dimensional tolerances.

When the photocell detects a signal, this mechanism detects a person or an object at the middle of the door and provides a complete security by keeping the door open. In case when anything is stuck in, it opens the door immediately. If a person or an object stucks in during the process of closing or opening the door, the security section provides security by reversing the process. Protection System The electronic system device provides an automatic protection against high voltages (except from the ones higher than 280 volt and sudden rises). The door is opened or closed automatically according to the signals from inside or outside of the sensor.

Ensure metered dose integrity and accuracy in oral inhalers Customized POREX ® inhaler filters are used in metered dose inhalers to deliver measured amounts of pharmaceutical agents to patients via oral-bronchial administration. With the added ability for customization to promote preservative-free packaging, our oral inhaler filters: Deliver accurate doses in metered dose inhalers–Customized inhaler filters facilitate the delivery of measured amounts of pharmaceutical agents specific to the device’s design requirements. Protects inhaler's mechanical systems from obstruction, thereby enhancing performance. Can be customized based on device requirements by optimizing for pore size, airflow and dimensional tolerances.

Ensure metered dose integrity and accuracy in oral inhalers Customized POREX ® inhaler filters are used in metered dose inhalers to deliver measured amounts of pharmaceutical agents to patients via oral-bronchial administration. With the added ability for customization to promote preservative-free packaging, our oral inhaler filters: Deliver accurate doses in metered dose inhalers–Customized inhaler filters facilitate the delivery of measured amounts of pharmaceutical agents specific to the device’s design requirements. Protects inhaler's mechanical systems from obstruction, thereby enhancing performance. Can be customized based on device requirements by optimizing for pore size, airflow and dimensional tolerances.

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The VISCOFLUX mobile S drum emptying system was specifically designed for use in pharmaceutical, food and cosmetics industries. It is perfectly suited for ensuring efficiency and process safety while pumping high viscosity, paste-like, non-self-flowing media out of diverse drums – either with or without aseptic bags. Media can be transferred low-shear and continously. The residual amount remaining in the drum is up to less than 1 %. The mobile drum emptying system offers a high degree of flexibility and can also be operated in wet or damp production environments. The system's stainless steel process device bears the protection class IP 66.

Sensitive electrical or electronic equipment, components and devices (ESD sensitive elements) may be damaged or destroyed by electrostatic discharges (ESD) in the immediate vicinity. Electrostatic discharges can come from people or through handling ESD sensitive components (e.g. during production, assembly, transport, storage etc). Electrically conductive products which conform to DIN EN 61340-5-1 are essential within electronic environments to prevent an electrostatic discharge. These products can be used for ESD applications or in ESD protection areas (EPA) in accordance with DIN EN 61340-5-1. Safety: These ESD products can also be used for devices, components and protection systems in areas with high risk of explosion. Use of these ESD products prevents the occurrence of electrostatic spark discharges, eliminating the potential ignition of gases and dusts which could lead to explosions in enclosed spaces.

Due to the ever increasing automation of manufacturing processes and equipment, the protection of people from sources of danger is growing in importance. The BLOCAN safety guard has a grid design and therefore reduces the effort required from the user in planning, construction and assembly to a minimum. The RK protection system complies with the new Machinery Directive 2006/42/EC. Using special Click & Safe connection elements, the safety guard elements are fixed quickly and securely to pillars made from BLOCAN® aluminium profiles which fulfil the legal requirements for safety devices. Stable protection system with aluminium design Minimal effort required in construction due to standard grid Short assembly times with no mechanical work Clamping profiles allow a wide variety of panel elements to be installed Smooth, easy-clean outer surfaces, attractive design Comprehensive range of accessories Complies with the new EU Machinery Directive 2006/42/EC

Ensure metered dose integrity and accuracy in oral inhalers Customized POREX ® inhaler filters are used in metered dose inhalers to deliver measured amounts of pharmaceutical agents to patients via oral-bronchial administration. With the added ability for customization to promote preservative-free packaging, our oral inhaler filters: Deliver accurate doses in metered dose inhalers–Customized inhaler filters facilitate the delivery of measured amounts of pharmaceutical agents specific to the device’s design requirements. Protects inhaler's mechanical systems from obstruction, thereby enhancing performance. Can be customized based on device requirements by optimizing for pore size, airflow and dimensional tolerances.