Protection against overheating - Import export

The FORA 33 series UPS uses leading technologies that ensure high performance and reliability two highspeed digital signal processors (DSPs) with full digital control for high power quality, high input power factor and low input current distortion.

This controller regulates the fan speed of single-phase motors from 1,5 to 10 A via phase angle control a.k.a. Triac technology. The supply voltage of 230 VAC can be turned off via the illuminated ON/OFF switch on the side of the unit. Via de potentiometer located on the front of the controller you can set the desired fan speed. Minimum speed can be adjusted via an internal trimmer and kickstart/softstart by adding/removing a jumper on the PCB of the controller. This controller is typically used to regulate the speed of AC fans or centrifugal pumps in HVAC systems. The regulator is also available with TK monitoring. This function will deactivate the motor in case of overheating. The code for this type of regulator suitable for 1,5 A is ITRS-15-DT.

The Duzzona W2 magnetic charger will charge your phone with a maximum power of 15W. The design of the charger allows you to charge the phone in various vertical and horizontal positions, thanks to the foldable leg and handle. Charging is also provided for smartphones with a case with a thickness of max. 5mm. Duzzona has equipped the device with an additional system to protect against overheating (ventilation grilles on the back of the housing). The charger can also be used as a phone stand.

The Duzzona W2 magnetic charger will charge your phone with a maximum power of 15W. The design of the charger allows you to charge the phone in various vertical and horizontal positions, thanks to the foldable leg and handle. Charging is also provided for smartphones with a case with a thickness of max. 5mm. Duzzona has equipped the device with an additional system to protect against overheating (ventilation grilles on the back of the housing). The charger can also be used as a phone stand.

The Hinovo powerbank is a useful gadget with MagSafe or Qi wireless charging. The product achieves wireless charging with a maximum power of 15W. This allows any compatible device to be charged effectively. The powerbank can be charged via the USB-C port, which supports power up to 20W, which gives us about 3 hours of charging from 0% to 100%. The housing is made of non-slip ABS, which increases safety and prevents it from slipping out of your hand. In addition, protection against overheating of the device and a cooling system have been built in. The gadget is small in size and ideal for taking it with you on a trip to a backpack or handbag.

The Hinovo powerbank is a useful gadget with MagSafe or Qi wireless charging. The product achieves wireless charging with a maximum power of 15W. This allows any compatible device to be charged effectively. The powerbank can be charged via the USB-C port, which supports power up to 20W, which gives us about 3 hours of charging from 0% to 100%. The housing is made of non-slip ABS, which increases safety and prevents it from slipping out of your hand. In addition, protection against overheating of the device and a cooling system have been built in. The gadget is small in size and ideal for taking it with you on a trip to a backpack or handbag.

Acefast fast charger. Designed for the UK market, fits UK type sockets. It has two USB Type C ports that allow charging with a power of up to 50W. Allows you to quickly charge devices, e.g. in PPS, Power Delivery, Quick Charge 3.0, AFC and FCP standards. It is made of fire-resistant PC material. It has been equipped with many protections such as overheating, overvoltage, high voltage or overload. The electronic components of the charger were made in GaN technology, i.e. they are based on gallium nitride, not on silicon. GaN means better work efficiency and lower energy consumption.

Acefast fast charger. Designed for the UK market, fits UK type sockets. It has two USB Type C ports that allow charging with a power of up to 50W. Allows you to quickly charge devices, e.g. in PPS, Power Delivery, Quick Charge 3.0, AFC and FCP standards. It is made of fire-resistant PC material. It has been equipped with many protections such as overheating, overvoltage, high voltage or overload. The electronic components of the charger were made in GaN technology, i.e. they are based on gallium nitride, not on silicon. GaN means better work efficiency and lower energy consumption

Acefast fast charger. Designed for the UK market, fits UK type sockets. It has two USB Type C ports that allow charging with a power of up to 50W. Allows you to quickly charge devices, e.g. in PPS, Power Delivery, Quick Charge 3.0, AFC and FCP standards. It is made of fire-resistant PC material. It has been equipped with many protections such as overheating, overvoltage, high voltage or overload. The electronic components of the charger were made in GaN technology, i.e. they are based on gallium nitride, not on silicon. GaN means better work efficiency and lower energy consumption.

Acefast fast charger. Designed for the UK market, fits UK type sockets. It has two USB Type C ports that allow charging with a power of up to 50W. Allows you to quickly charge devices, e.g. in PPS, Power Delivery, Quick Charge 3.0, AFC and FCP standards. It is made of fire-resistant PC material. It has been equipped with many protections such as overheating, overvoltage, high voltage or overload. The electronic components of the charger were made in GaN technology, i.e. they are based on gallium nitride, not on silicon. GaN means better work efficiency and lower energy consumption.

Acefast fast car charger. It has 2 USB Type C ports and a USB port. The USB Type-C ports allow charging up to 36W for the C1, up to 65W, and the USB socket up to 36W. Allows you to quickly load e.g. in PPS, Power Delivery, Quick Charge 3.0, AFC and FCP standards. You can connect 3 devices to it at the same time. It is made of fire-resistant PC material. It has been equipped with many protections such as overheating, overvoltage, high voltage or overload.

Acefast fast car charger. It has 2 USB Type C ports and a USB port. The USB Type-C ports allow charging up to 36W for the C1, up to 65W, and the USB socket up to 36W. Allows you to quickly load e.g. in PPS, Power Delivery, Quick Charge 3.0, AFC and FCP standards. You can connect 3 devices to it at the same time. It is made of fire-resistant PC material. It has been equipped with many protections such as overheating, overvoltage, high voltage or overload.

BATTERY 8 Ah - our scooter has one of the most capacious batteries available on the market . You don't have to wonder if you have enough power to get to home, work or school. The battery is perfectly protected against damage, and also has protection against short circuit, overheating, etc. The vehicle has a speed of up to 25 km/h , and its maximum distance is 15-17 km . We offer the best technological solution and high quality workmanship

You don't have to look for reasons to have the Polish Bruna winter hat in your drawer. Hurry up with your purchase while there is still time. When heavy frosts and icy winds come, this winter hat should already be on your head. You will quickly discover all the advantages of having it. It is fashionable because it is made of thick yarn. You can match it to your style because it comes in many colors. Moreover, it has a fashionable fold and does not have a pillowcase, which makes it light. However, this is not the end of all its advantages. Bruna winter hat – 100% Polish product Polish winter hats are very popular among consumers. Why? There are many things that go into this. First of all, they are very practical, comfortable and durable. They are also sewn in Poland, from carefully selected materials that meet the expectations of Polish users. They perfectly isolate from the cold and at the same time protect the head from excessive overheating.

Stacy is a fashionable women's hat that proves that an openwork design can be practical and visually attractive. To ensure the expected thermal comfort, the inside of the hat has a warm lining, color matched to the outer layer of the material. High-quality yarn is resistant to intensive use and washing. Women's hat for winter and autumn Openwork hats are a good choice for autumn days. Even though they look very thick and heavy, they are actually light and practical. The openwork pattern combined with the lining protects the head against accidental overheating, which is also not advisable on windy days. The presented hat has a narrow drawstring, very useful for keeping it in place and protecting it from accidental tilting. We recommend this model to all women who have so far been unsuccessfully looking for a hat that is light, comfortable, and at the same time fashionable and warm.

Micro heaters are used in devices requiring a small but accurate heat source with precise temperature control, such as optical interactive assistance systems. Allowing for targeted heating of tiny spaces, IST AG micro heaters are found across various industries, including automotive, laser manufacturing, humidification units, life-science, 3D printing and medical devices. They are a precision heat source for gas and humidity sensors, biospy or tissue samples for medical analysis, or used in malignant tumor treatment. Our micro heaters combine high-precision and long-term stability with a wide temperature range from -50°C up to +800°C and feature numerous benefits: — Fast response times — High temperature stability — Long term stability — Overheating protection — High precision — Targeted heating of tiny spaces — Tailor-made to fit customer's application Each micro heater is individually customized and designed to fit your application's requirement.

Micro heaters are used in devices requiring a small but accurate heat source with precise temperature control, such as optical interactive assistance systems. Allowing for targeted heating of tiny spaces, IST AG micro heaters are found across various industries, including automotive, laser manufacturing, humidification units, life-science, 3D printing and medical devices. They are a precision heat source for gas and humidity sensors, biospy or tissue samples for medical analysis, or used in malignant tumor treatment. Our micro heaters combine high-precision and long-term stability with a wide temperature range from -50°C up to +800°C and feature numerous benefits: — Fast response times — High temperature stability — Long term stability — Overheating protection — High precision — Targeted heating of tiny spaces — Tailor-made to fit customer's application Each micro heater is individually customized and designed to fit your application's requirement.

INOX has developed a range of optimally balanced antifreeze products based on the requirements of global car manufacturers. With INOX antifreeze you can be absolutely sure that your car is reliably protected from overheating or freezing. Our antifreeze products have a high boiling point and a low freezing point guaranteeing long and uninterrupted operation of the car cooling system. Adding special components prevents corrosion and foaming processes as well as it minimizes cavitation.

HotCoils have a larger cross-sectional area and are thus capable of greater power than MicroCoils. For this reason they are used in hot runners with adequate space and where high heat densities are required. Owing to the large number of variants and for cost reasons, the sheath material for HotCoils is stainless steel - the standard for the market and thus also for Freek. HotCoils are large enough that thermocouples can be integrated into them. Our standard here is Type J (Fe-CuNi; red/blue), while Types J and K are also available conforming to the IEC and ANSI standards (see colour codes). Since the measurement point of a built-in temperature sensor is situated in the heater and never where the heat is actually required, a HotCoil with a thermocouple makes particular sense where the application allows the use of larger processing (temperature) windows or where the installation location or the design requires protection against overheating.

ELECTRIC HEATER FAN TDS 755-10-15 – solid three stage heating power up to 15 kW A true power pack, the electric heater fan TDS 75 cuts a remarkably fine figure even with large-volume heating tasks. And not by chance, but exclusively made by Trotec. And since our distinctive logo has been printed on the outside, we have also incorporated convincing extras inside, which make all the difference to conventional standard electric heater fans. In addition to common equipment features such as a fan motor provided with thermal protection or a reliable overheating protection, the electric heater fan TDS 75 comes equipped with further practice-oriented features, e.g. an integrated air baffle, which optimally leads the warm air flow outside and initiates maximum efficiency, or trapezoidally mounted carrying handles, on which the electric heater fan can be stably stacked a number of times.

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat Connection for external thermostat Chassis for easier movement

GLYSANTIN® G30 (January 2017) GLYSANTIN® G30 is an ethylene glycol-based coolant that must be diluted with water before use . GLYSANTIN® G30 contains an inhibitor package based on organic acid salts (OAT coolants). GLYSANTIN® G30 is free of nitrites, amines, phosphates, borates and silicates. Properties GLYSANTIN® G30 provides excellent protection for engines against corrosion, overheating and frost. It effectively prevents corrosion and deposits in the cooling system with its important components such as cooling channels in the cylinder head and engine block, radiator, water pump and heater core exchanger. Meets the requirements of the following coolant standards: - AS 2108-2004 - ASTM D 3306 - ASTM D 4985 - BS 6580:2010 - CUNA NC 956-16 - AFNOR NFR 15-601 - Önorm V 5123 - JIS K 2234:2006 - SAE J1034 - SANS 1251:2005 - China GB 29743-2013 Officially approved by: - ​​Audi / Seat / Skoda / VW - Bentley / Lamborghini - DAF - Daimler

The IDS 100, our second-strongest model of this series of mobile indirect oil heaters, provides powerful mobile heating power Manufactured in Europe, the oil heater fan IDS 100 with a nominal heat input of up to 117.26 kW and an air flow rate of 5,500 m³/h quickly and effectively heats storage and production halls, workshops, building sites and greenhouses. This is ensured by the integrated oil burner with Suntek pump. Of course, your safety is our top priority. Owing to the double-walled housing with protective coating the surface temperature of the outer casing is reduced to a minimum, which means a decreased risk of injuries for the user. Moreover, the housing provides optimum soundproofing. The device is equipped with an electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling.

IDS 30 OIL HEATER FANMobile heating power on wheels: The IDS 20 D direct heaters for fast, uncomplicated heating With robust design, the oil heater IDS 30 has everything you need for an economic and effective heating application. This device from the IDS pro series is very flexible. On the one hand, its carriage with big wheels enables a quick transport and easy set-up even on building sites and uneven terrain. On the other hand, there is no need for an external oil tank because of the integrated fuel container. The oil heater fan is originally "Made in Europe" and as standard equipped with electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling. Additionally, the double-walled housing with protective coating increases safety at work by minimizing the surface temperature of the outer casing and thus the risk of injuries and further offers an effective soundproofing.

The Oil Heater of the IDE series are budget saving solutions with solid technology for typical standard heating tasks with direct warmth on site. For heating applications outdoors the Oil Heater of the IDE series are best prepared thanks to the sturdy housing made of double painted material. The large air outlet guarantees a maximum warm air expansion with high efficiency, which is 100 % at the direct fired models. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater, you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read off on the fuel level display. Benefits in practise: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber

IDS 80 OIL HEATER FANThe robust IDS 80 oil fan heater for fast, uncomplicated heating - mobile heating power on wheels This oil heater fan of the IDS pro series is especially suitable for longer heating applications, because it is possible to connect an external oil tank in addition to the integrated fuel container. The double-walled housing with protective coating ideally absorbs sound, minimizes surface temperature and thus the risk of injuries. Electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling are further safety measures. The carriage and big wheels provide sufficient flexibility. Especially when working on building sites, the location can simply be changed. The oil heater fan IDS 80 further comes with a connection facility for an air transport hose and a two-way hose distributor.

Being a powerful rapid heater, the compact TDS 20 M is ideally suited for quickly heating cold rooms in the time between seasons or on particularly cold days. Whether for use in a workshop, in living or working spaces – the combination of robust workmanship and discreet design leaves a good impression in every environment. And the thermally insulated carrying handle makes it easy to transport the device from one site of application to the next. Instead of heating wire technology, the TDS 20 M uses an advanced PTC ceramic heating element for heating the air. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.

ELECTRIC HEATER FAN TDS 20Black, white, hot! Ideal for many stationary heating tasks. This electric heater fan cuts a remarkably fine figure in the most varied of heating applications. And not by chance, but exclusively made by Trotec. In developing the TDS series, we paid particular attention to many practical details which make the great difference in contrast to conventional standard electric heater fans. In addition to common equipment features such as overheating protection or a fan motor provided with thermal protection, the electric heater fan TDS 20 comes with an extra air baffle which optimally leads the warm air flow outside and initiates maximum efficiency. Thanks to the integrated thermostat control, the produced warm air flow can be continuously adjusted exactly to the desired temperature.

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor, whose pressure is displayed on a manometer. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value