Protection against overheating - Import export

INOX has developed a range of optimally balanced antifreeze products based on the requirements of global car manufacturers. With INOX antifreeze you can be absolutely sure that your car is reliably protected from overheating or freezing. Our antifreeze products have a high boiling point and a low freezing point guaranteeing long and uninterrupted operation of the car cooling system. Adding special components prevents corrosion and foaming processes as well as it minimizes cavitation.

Is suitable for all engines and can be mixed with all coolants. Protects against frost, rust and overheating all year round. Other sizes available on request

HotCoils have a larger cross-sectional area and are thus capable of greater power than MicroCoils. For this reason they are used in hot runners with adequate space and where high heat densities are required. Owing to the large number of variants and for cost reasons, the sheath material for HotCoils is stainless steel - the standard for the market and thus also for Freek. HotCoils are large enough that thermocouples can be integrated into them. Our standard here is Type J (Fe-CuNi; red/blue), while Types J and K are also available conforming to the IEC and ANSI standards (see colour codes). Since the measurement point of a built-in temperature sensor is situated in the heater and never where the heat is actually required, a HotCoil with a thermocouple makes particular sense where the application allows the use of larger processing (temperature) windows or where the installation location or the design requires protection against overheating.

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat Connection for external thermostat Chassis for easier movement

GLYSANTIN® G30 (January 2017) GLYSANTIN® G30 is an ethylene glycol-based coolant that must be diluted with water before use . GLYSANTIN® G30 contains an inhibitor package based on organic acid salts (OAT coolants). GLYSANTIN® G30 is free of nitrites, amines, phosphates, borates and silicates. Properties GLYSANTIN® G30 provides excellent protection for engines against corrosion, overheating and frost. It effectively prevents corrosion and deposits in the cooling system with its important components such as cooling channels in the cylinder head and engine block, radiator, water pump and heater core exchanger. Meets the requirements of the following coolant standards: - AS 2108-2004 - ASTM D 3306 - ASTM D 4985 - BS 6580:2010 - CUNA NC 956-16 - AFNOR NFR 15-601 - Önorm V 5123 - JIS K 2234:2006 - SAE J1034 - SANS 1251:2005 - China GB 29743-2013 Officially approved by: - ​​Audi / Seat / Skoda / VW - Bentley / Lamborghini - DAF - Daimler

The IDS 100, our second-strongest model of this series of mobile indirect oil heaters, provides powerful mobile heating power Manufactured in Europe, the oil heater fan IDS 100 with a nominal heat input of up to 117.26 kW and an air flow rate of 5,500 m³/h quickly and effectively heats storage and production halls, workshops, building sites and greenhouses. This is ensured by the integrated oil burner with Suntek pump. Of course, your safety is our top priority. Owing to the double-walled housing with protective coating the surface temperature of the outer casing is reduced to a minimum, which means a decreased risk of injuries for the user. Moreover, the housing provides optimum soundproofing. The device is equipped with an electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling.

IDS 30 OIL HEATER FANMobile heating power on wheels: The IDS 20 D direct heaters for fast, uncomplicated heating With robust design, the oil heater IDS 30 has everything you need for an economic and effective heating application. This device from the IDS pro series is very flexible. On the one hand, its carriage with big wheels enables a quick transport and easy set-up even on building sites and uneven terrain. On the other hand, there is no need for an external oil tank because of the integrated fuel container. The oil heater fan is originally "Made in Europe" and as standard equipped with electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling. Additionally, the double-walled housing with protective coating increases safety at work by minimizing the surface temperature of the outer casing and thus the risk of injuries and further offers an effective soundproofing.

The Oil Heater of the IDE series are budget saving solutions with solid technology for typical standard heating tasks with direct warmth on site. For heating applications outdoors the Oil Heater of the IDE series are best prepared thanks to the sturdy housing made of double painted material. The large air outlet guarantees a maximum warm air expansion with high efficiency, which is 100 % at the direct fired models. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater, you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read off on the fuel level display. Benefits in practise: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber

IDS 80 OIL HEATER FANThe robust IDS 80 oil fan heater for fast, uncomplicated heating - mobile heating power on wheels This oil heater fan of the IDS pro series is especially suitable for longer heating applications, because it is possible to connect an external oil tank in addition to the integrated fuel container. The double-walled housing with protective coating ideally absorbs sound, minimizes surface temperature and thus the risk of injuries. Electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling are further safety measures. The carriage and big wheels provide sufficient flexibility. Especially when working on building sites, the location can simply be changed. The oil heater fan IDS 80 further comes with a connection facility for an air transport hose and a two-way hose distributor.

Being a powerful rapid heater, the compact TDS 20 M is ideally suited for quickly heating cold rooms in the time between seasons or on particularly cold days. Whether for use in a workshop, in living or working spaces – the combination of robust workmanship and discreet design leaves a good impression in every environment. And the thermally insulated carrying handle makes it easy to transport the device from one site of application to the next. Instead of heating wire technology, the TDS 20 M uses an advanced PTC ceramic heating element for heating the air. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.

ELECTRIC HEATER FAN TDS 20Black, white, hot! Ideal for many stationary heating tasks. This electric heater fan cuts a remarkably fine figure in the most varied of heating applications. And not by chance, but exclusively made by Trotec. In developing the TDS series, we paid particular attention to many practical details which make the great difference in contrast to conventional standard electric heater fans. In addition to common equipment features such as overheating protection or a fan motor provided with thermal protection, the electric heater fan TDS 20 comes with an extra air baffle which optimally leads the warm air flow outside and initiates maximum efficiency. Thanks to the integrated thermostat control, the produced warm air flow can be continuously adjusted exactly to the desired temperature.

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor, whose pressure is displayed on a manometer. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. All oil fired indirect IDE devices take place with help of a Danfoss® injection pump. As well, these models have an easy reachable fuel filter on the outside. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value

ELECTRIC HEATER FAN TDS 755-10-15 – solid three stage heating power up to 15 kW A true power pack, the electric heater fan TDS 75 cuts a remarkably fine figure even with large-volume heating tasks. And not by chance, but exclusively made by Trotec. And since our distinctive logo has been printed on the outside, we have also incorporated convincing extras inside, which make all the difference to conventional standard electric heater fans. In addition to common equipment features such as a fan motor provided with thermal protection or a reliable overheating protection, the electric heater fan TDS 75 comes equipped with further practice-oriented features, e.g. an integrated air baffle, which optimally leads the warm air flow outside and initiates maximum efficiency, or trapezoidally mounted carrying handles, on which the electric heater fan can be stably stacked a number of times.

Whether you want to reliably keep construction zones warm, effectively heat larger halls, protect your livestock from the cold or keep your work material free of ice despite low temperatures: with 100 kW of direct heating power the IDE 100 D provides a high heating capacity for every demand with 100 % efficiency. The integrated oil burner of this heating device can be fuelled by either diesel or fuel oil. The continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss® injection pump. Safe operation of the oil heater fan is ensured by an electronic flame trap and an integrated overheating protection. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.

CERAMIC FAN HEATER TDS 10 MQuick, effective and draught-free warmth without burning dust The small ceramic fan heater is not only the ideal heating solution for allergy-sufferers to be used in living and work spaces. For, generally speaking, electric heaters are excellently suited for use in closed interior spaces, as they neither consume oxygen nor produce any combustion gases. The ceramic fan heater TDS 10 M still outweighs this commonly known advantage of electric heaters, for it is equipped with a PTC ceramic heating element instead of heating wires. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.

For the thermal separation of a mixture a thin film is produced at the heated wall of a cylindrical or conical evaporator. A distribution ring on the rotor distributes the liquid evenly across the periphery. Then, the blades fitted at the rotor spread the liquid as a thin film of min. 0.5 mm over the heat transfer surface. The model concept for the flow in the thin film evaporator assumes that prior to each rotor blade a bow wave is formed. In the gap between the rotor blade and the heating surface, fluid is supplied from the bow wave of a highly turbulent area with intense heat and mass transport. This results in a good heat transfer performance even with viscous products. In addition, the formation of deposits is avoided and the intensive mixing also protects temperature-sensitive products from overheating.

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from highly break-resistant, special plastic on a particularly sturdy frame. With hinged rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design Patent. Cable length: 25 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Black Reel-Ø: 240 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the perfect Quick & Easy Rewind System ROL´UP and the unique Bretec® Anti Cable Twist System. Reel body made from highly break-resistant, special plastic on a particularly sturdy frame. With hinged rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design Patent. Cable length: 40 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Black Reel-Ø: 290 mm

Compact design, for comfortable handling. Practical carrying handle. Variable use, standing or flat. Robust, rigid construction. 4 earthed sockets with overheating protection. Childproof sockets. Design protected. Cable length: 5 m Cable: H05VV-F 3G1,5 Nominal current: 16 A Colour: Black/Light Grey

For short-term use outdoors, IP 44. Extension cable reel with plug and trailing socket. Cable reel with 2 m cable for connecting to the power source. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. With hinged rotary handle for comfortable rolling up. The BREMAXX® cable is extremely sturdy, highly flexible even at low temperature down to -35 ºC, oil- and UV-resistant and highly abrasion-resistant. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. Patent pending. Cable length: 48 + 2 m Cable: AT-N05V3V3-F 3G1,5 Cable quality: BREMAXX® Cable colour: Red Reel-Ø: 290 mm

For short-term use outdoors, IP 44. Extension cable reel with plug and trailing socket. Cable reel with 2 m cable for connecting to the power source. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. With hinged rotary handle for comfortable rolling up. The BREMAXX® cable is extremely sturdy, highly flexible even at low temperature down to -35 ºC, oil- and UV-resistant and highly abrasion-resistant. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. Patent pending. Cable length: 23 + 2 m Cable: AT-N05V3V3-F 3G1,5 Cable quality: BREMAXX® Cable colour: Red Reel-Ø: 240 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. Rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. / Patent pending. Cable length: 25 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Black Reel-Ø: 240 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the perfect Quick & Easy Rewind System ROL´UP and the unique Bretec® Anti Cable Twist System. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. Rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. Patent pending. Cable length: 40 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Red Reel-Ø: 290 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. Extra stable, shock-absorbing steel tube frame with galvanised steel tube, exclusive stability. Carry handle with comfortable cable guide management during winding. Reel body made of special plastic with reinforced ribbed structure. Rotary handle for comfortable rolling up. The BREMAXX®-PUR cable (BQ cable) is highly resistant to abrasions, crushing, UV light, cutting and tearing. In addition, it is accid-proof, oil-resistant, wheatherproof and microbe-resistant. Remains highly flexible even at low temperature down to -40 °C. BQ cable (PUR) is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Cable length: 40 m Cable: H07BQ-F 3G1,5 Cable quality: BREMAXX®-PUR Cable colour: Orange Reel-Ø: 290 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. Extra stable, shock-absorbing steel tube frame with galvanised steel tube, exclusive stability. Carry handle with comfortable cable guide management during winding. Reel body made of special plastic with reinforced ribbed structure. Rotary handle for comfortable rolling up. The BREMAXX®-PUR cable (BQ cable) is highly resistant to abrasions, crushing, UV light, cutting and tearing. In addition, it is accid-proof, oil-resistant, wheatherproof and microbe-resistant. Remains highly flexible even at low temperature down to -40 °C. BQ cable (PUR) is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Cable length: 25 m Cable: H07BQ-F 3G1,5 Cable quality: BREMAXX®-PUR Cable colour: Orange Reel-Ø: 240 mm

ACANEO is the ideal solution for wide-area general illumination of buildings with high room heights: We create efficient illumination in halls up to 30 metres in height. This increases the performance of staff and the quality of their work. ACANEO also provides an important contribution to a positive energy balance. Your company benefits from these factors: Social responsibility and commitment to the environment have a favourable effect on the cost-efficiency • Advanced LED technology with up to 60000 hours of useful life (L80B10) • Extremely robust die-cast aluminium housing • Energy saving compared with conventional luminaires • Time- and cost-saving mounting • Thermal management with intelligent overheating protection • Patented lenses for precise light deflection • High-quality processing according to Waldmann quality standards • Maintenance-free • 5 years warranty • Resistant to common coolants, oils and welding vapours • Integrated, optional constant light output (CLO)

It is easy to operate with a recoil start function that provides quick activation. Fuel consumption is low because the variable speed control adjusts engine speed according to load conditions. In addition, the generator can be connected to another and used in parallel to increase overall power capacity without the need for a larger generator. Features: -traction starter -Large fuel tank 10 liters ( run time up to 12 hours) -Engine oil level monitor -Overheating protection -Silenced hood CE compliant noise level -Sockets -Electric key start 12 V -Automatic voltage regulation AVR -Inverter technology, stable voltage and frequency -Instrumentation, voltmeter, hour meter -Circuit breaker -wheels -Motor alarm: low oil level -overload -Intelligent speed control for fuel efficiency -Connections for parallel operation

Mobile plastic granules dryers from the JETBOXX® system are available with a volume of 30/50/75/200 litres and can be optimally adapted to your requirements with a large number of options. They can be used anywhere, where top-mounted dryers fail because of weight / or space reasons, and flexibility is required. When changing the setting of task, the components can be combined easily or used for example as top-mounted dryers. The compressed air-based dryers are maintenance-free and provide professional functions such as: plastic-specific and throughput dependent dryer settings, database for plastics, conveying control, week timer, overheating protection, dew point measurement, speed dial programs, personal programs, and many more.