Production scraps - Import export

Compactor suitable for reclaiming expanded polystyrene packaging. Packaging is reduced to blocks which can easily be placed on pallets for inexpensive transport, storage and recycling. The compactor accepts large materials such as the packaging used by television manufacturers, food containers, etc. Packaging manually fed by the operator is crushed by breakers and then transported by a screw into the compacting chamber. The compacted polystyrene is ejected through a tube at the side.

Laser Scanner Solution: This task is a typical application of the high-resolution QuellTech 2D/3D Q5-880 Blue Laser Scanners. Two of these units are placed at the left and at the right of the measuring objects, at a defined inclination angle. Blue laser light in this case is a prerequisite, as the cast parts are red-hot, hence emitting in the red spectral range. Additionally, the client was in need of a software solution for the project, so a 3D point cloud processing application was implemented, performing inline and evaluating width, height and angle results. QuellTech customer is able to inspect continuously the product quality, simultaneously avoiding scrap. He uses the same system for more than 10 different types of castings. Errors caused by manual inspection are considerably reduced, and safety for personnel is enhanced.

Monitor the quality in your extrusion line, fiber production, polymer production or food and chemical production continuously in real time with the Promix Visco-P inline viscosity meter. Prevent scrap production and reduce raw material costs through active raw material management. Promix Visco-P is a true online rheometer that helps you monitor your production process and save production costs. Ask for a test unit and see for yourself! Advantages Promix Visco-P inline viscosity measurement ,Continuous monitoring of raw material quality and process conditions in real time ,Raw material cost reduction through active raw material management ,Precise inline viscosity measurement in the melt stream – without bypass ,Suitable for all viscous media ,Additional benefit of melt and temperature homogenization in the Promix melt blender, which also serves as a measuring section ,Can be integrated into any extrusion line ,Test units available

UNLOCK YOUR PROCESS Unparalleled Performance for Increased Yields and Maximum Uptime The ever increasing price of silicon wafers and demand for finished products means that scrapped wafers cost more than ever before. Thus, understanding your process and monitoring for defects has become a much higher priority in semiconductor fabrication centers. The Transpector MPH Gas Analysis System is designed to unlock your process with industry leading performance for all of your gas analysis applications to help maximize chip yields and minimize tool downtime. Combined with a low overall cost of ownership and high mean-time-between-failures, Transpector MPH helps your bottom line more than any other residual gas analyzer (RGA) on the market. INFICON has leveraged its expertise in gas analysis process control equipment to create an RGA with industry-leading data collection speed, minimum detectable partial pressure and signal-to-noise ratio. All this, without sacrificing any of the...

Plastic scrap Foundry scrap Post-production scrap Link, sector Rim Copper scrap The purchased scrap is subjected to qualitative analysis, including control of the chemical composition, determination of the level of contamination and radioactivity. The scrap quality assessment process is carried out by qualified employees with many years of experience.

in grades A2, A4, A5, A6 according to the chemical composition specified by the customer In addition to aluminum alloys, our sales offer also includes various types of scrap and waste that are a by-product of the production process or scrap classification: heartburn furnace steel magnesium scrap zinc scrap steel scrap

Planetary cutting machine for corrugated metal and PTFE hoses. Cutting results that often eliminate an additional step. This completely unique planetary cutting machine delivers almost scrap-free production and high efficiency. With a completely variable centering clamp system, all hose OD to the maximum rating for the machine can be cut. Approximate cutting time is 25 seconds for 1 ¼“ (ø DN 32). Productive and ergonomic •No dramatic flaring of the stainless steel braid •Reduces or eliminates time-consuming manual preparatory work thereby increasing productivity and lowering costs •Centering hose clamp system •Shortest cut possible from 10 cm •Minimizes personnel costs and preparatory work •No wrapping/unwrapping with adhesive tape required •Clearly laid-out user friendly software on a panel with a 6“ color display screen •Large article memory promotes productivity •Reference run for optimal positioning of the cutting blade for cutting all hose diameters CE compliant

Painting in cleanrooms according to the DIN EN ISO 14644 standard Cleanroom technology Many processes for the application of technically functional coatings for increased resistance to scratching (hardcoat), UV stability, lotus effects, anti-fog or other thin-film applications place high demands on the implementation and function of the coating plant and its components. Thanks to a modular design, optimum plants are conceived in close cooperation with customers and users that minimise faulty coatings caused by particle inclusions and the resulting product scrap or rework expenditure. The plants are designed strictly in accordance with the DIN EN ISO 14644 the standard. In designing the filter stages we orientate ourselves to a particle size with a diameter of 0.5 µm. Built-in components such as conveying equipment, robotics, application technology etc. are adapted by careful selection of the appropriate task. A further criterion in the conception of the plants is fast and efficient cleaning and maintenance, in order to obtain long plant operation times with a constantly good yield. Traditional applications are the coating of diffusers or cover glasses for car headlights or polycarbonate glazing.

WHY THROW MONEY AWAY? If you are producing hoses, tubes, or profiles, ideally there would be zero scrap from your production operation. However, even the most efficient operation produces a percentage of scrap material. This is the money that you are losing. Why throw money away? Since the cost of plastic material, which has been constantly rising over the past years, is a large overhead cost to your business, Flexplas offers you very efficient and economical recycling systems to save up your money. With Flexplas recycling lines, you will be able to recycle your scrap plastic material and re-feed them back into your production for additional cost savings. Using an in-house Flexplas Recycling System you will be able to utilize a very high % of scrap back into your main production representing a very fast return on investment.

Fabwide, Process Specific FabGuard FDC combines on-line Fault Detection and Classification (FDC) capabilities with powerful tools for fab engineers to readily analyze virtually any aspect of process and equipment behavior. No other system provides greater capability to guard against wafer loss, reduce unscheduled tool downtime and improve yield. Regardless of wafer size or product geometry, timely information is key to fab productivity and competitiveness. The increasing pressure to reduce costs makes it critical to maximize fab productivity, reduce the number of scrapped wafers and maximize equipment utilization. FabGuard meets the challenges of today’s semiconductor manufacturing by combining the collective experience of statisticians and engineers tasked with maintaining cutting edge fab productivity. FabGuard FDC is built on the principle that process and equipment knowledge is crucial to smooth fab operations. Redefining FDC - FabGuard Detection and...

ANDRITZ Kaiser provides complete circular and multi-form blank cutting lines, including feeder, press, stacker, and scrap conveyor. The production of blanks for further use in a deep drawing or embossing process imposes strict demands on the press and automation system. Precise timing and general performance are required in order to achieve competitive productivity. Due to the large amount of cutting required, a very rigid machine is needed to absorb the rebound without damaging any equipment. Finally, the tolerances of the end product call for a very precise slide movement and low frame deformation. ANDRITZ Kaiser can look back on decades of experience in the field of blank cutting lines. Our well-designed and thoroughly tested concept allows our customers to manufacture high-quality products with maximum efficiency. Our production lines for circular or multi-form blanks are characterized by the following aspects: Highly stable machine with split-design cast iron or combined...

No matter if it is called a «Blisk» (bladed disk) or an «IBR» (integrally bladed rotor), no matter if it is single stage or multi stage, Starrag’s dedicated machine concept of the NB series provides the best solution for efficiently machining these parts. Blisks made from Titanium, Nickelbased superalloys and the Blisks made of blade steels for stationary gas turbines triggered the development of the NB series. For all the necessary manufacturing operations Starrag provides the benchmark Efficient roughing for Blisks machined from solid, adaptive machining for friction welded Blisks, high dynamic finishing of the airfoils in point contact. Shortest cycle times and zero scrap rate production are achievable on the Starrag NB series. The NB series is based on the very successful Starrag LX series.

No matter if it is called a «Blisk» (bladed disk) or an «IBR» (integrally bladed rotor), no matter if it is single stage or multi stage, Starrag’s dedicated machine concept of the NB series provides the best solution for efficiently machining these parts. Blisks made from Titanium, Nickelbased superalloys and the Blisks made of blade steels for stationary gas turbines triggered the development of the NB series. For all the necessary manufacturing operations Starrag provides the benchmark Efficient roughing for Blisks machined from solid, adaptive machining for friction welded Blisks, high dynamic finishing of the airfoils in point contact. Shortest cycle times and zero scrap rate production are achievable on the Starrag NB series. The NB series is based on the very successful Starrag LX series.

No matter if it is called a «Blisk» (bladed disk) or an «IBR» (integrally bladed rotor), no matter if it is single stage or multi stage, Starrag’s dedicated machine concept of the NB series provides the best solution for efficiently machining these parts. Blisks made from Titanium, Nickelbased superalloys and the Blisks made of blade steels for stationary gas turbines triggered the development of the NB series. For all the necessary manufacturing operations Starrag provides the benchmark Efficient roughing for Blisks machined from solid, adaptive machining for friction welded Blisks, high dynamic finishing of the airfoils in point contact. Shortest cycle times and zero scrap rate production are achievable on the Starrag NB series. The NB series is based on the very successful Starrag LX series.

LDPE (LOW DENSITY POLYETHYLENE) Honey Coloured Granule During the production phase, the scrap is crushed with a Nylon Crushing Machine.It consists of a mixture of transparent color stretch, pallet cover and all Ldpe nylon products. Wire Mesh: Our product is produced by filtering in 50 double mesh. Some fields of usage: Nylon packaging, nylon bag, bubble nylon, pipe production, pipe fittings, plastic sheet.

Clean and high-quality cutting edge Increased productivity through reduced scrap and labor costs Low cost maintenance and consumables Maximum system flexibility thanks to robot mobility Designed to run without human intervention Easy and efficient to program, even complex paths and shapes Provides better precision, customization, speed and safety Optimal material utilization Robotic Cutting Software; Parameters automatically adjusted regarding to material and thickness. Calculated tool-paths and robot movements can be verified with simulation. Robot paths and laser parameters can be easily calculated on the offline CAM and simulation software. Step data can be loaded, and paths can be determined from edges or faces of CAD data

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details