Pressing materials - Import export

Made with 3M Scotchlite (origin of material: USA). Press studs on the sleeves and collar as well as the elasticated hood ensure a comfortable fit. Waterproof rating: 15,000 mm. Front zip pocket for storing keys, change, bus passes, etc. Long length to cover school backpacks and top half of legs. Zip bag for convenient storage included.

Metal sheets of various types and thicknesses are produced quickly and at low cost by making millimetric calculations on computer-controlled machines. Thanks to the pressure force that can be applied from 35 tons to 640 tons with press brake bending machines, materials up to 6000 mm in length and up to 20 mm in thickness can be processed.

Precision handling for heavy loads From end-of-line, through rack handling, to automated storage: Lödige has complete control of all the materials handling processes required in the press shop — including tool handling and systems for improved tool maintenance. Your advantages using Lödige solutions in the press shop: Ergonomic tool maintenance Coil handling up to 40 t Safe provision of pressed components Lifting and tilting tables up to 40 t Connection to pressed component storage Linked materials handling systems

Save 88% assembly time with cost-effective energy chain for intralogistics and crane systems. The igus autoglide 5 system transfers energy, data, fluids, and air safely in a single system, requires almost no maintenance, and is also very cost-effective, including a 2400.07AG.075.0 e-chain, steel cable guide, harnessed bus cable, and five single cores of 6mm² each.

Reducing transportation costs, compressing material for feeding to existing pressed-waste containers or baling presses, or shredding of material for conveyor belt feeding are good reasons for deploying a cardboard shredder. With the EKZ cardboard shredder and FKZ paperboard shredder, ERDWICH’s two rugged machines offer 100% process reliability in a range of form factors. Whether you need to shred packaging or process cardboard waste for feeding into existing conveyor systems, ERDWICH can always offer you a perfect solution tailored to your requirements.

Features: Made of ground sintered SmCo magnet Powder is mixed with resin and molded like NdFeB bonded magnet No need to be coated because it is difficult to erode and oxidize High-BH (maximum) High-Br and Hc with high-operating temperature, low-temperature coefficient, counter-demagnetization, decay resistance Main products cover SmCo5 and Sm2Co17 magnets, samarium cobalt powder, various assemblies and more OEM orders are welcomed Applications: Widely used in motors, watches, transducers, instruments, positional detectors, generators, radars and more High quality, competitive price, best service

CNC Press Brake puts the raw material that is in the form of metal or press into a new form by twisting it. It is a hair styling loom. In the old days, it was called caka, which was used more primitively in accordance with the possibilities. CNC Press decoiler bending machines are pressed between a mold to give a new shape. Hair is a metal loom. The lower and upper moldings are called male and female. In our company, cnc press brake is made of twist. A hydraulic pressure is applied. In press brake bending, the operation is performed by applying force. There are control panels that provide the principle of operation. Such characteristics of materials as their quality, type, thickness and pressure are also important.

Dry embossing is a type of process similar to the hot stamping, where foil is not used. There are two types of embossing. First one is convex - we need two clichés pressing the material by both sides ( negative and positive) with high temperature. It could be used on thiner materials - paper, carton and etc. Second one is concave - touches the material with one cliché and concave only the upper part.

Strontium Dry Pressing Ferrite Magnetic compound are suitable for producing magnets by dry pressing. Strontium ferrite material features better magnetic property than barium ferrite material in the area of remanence induction intensity, coercivity and magnetic hysteresis loss. Strontium compound have been added proper quantity of binders and lubricants and pass through 120 mesh sieve,so as binders to be uniformly distributed for better orientation. We could supply the compound in both spray dried or vibration granulated form.

1. Good quality and best raw materials 2. Well pressed bales 3. Less moisture 4. We are a professional manufacturer for these products 5. Environment-Friendly and healthy 6. Simply use 7. Natural materials 8. Good quality and service 9. Competitive price 10. Secure order/ fastest shipping

In the area of elastomer technology, the Zimmer Group uses the most modern production processes to manufacture sophisticated workpieces from elastomers. In addition to the transfer molding process, in which the elastomer is placed in a mold, pressed into shape with a die and vulcanized under pressure and heat, we also use the injection transfer molding process. Here, the starting materials are pressed into the mold on an injection molding machine and vulcanize out there. With these two processes, we process a wide range of elastomers such as NBR, silicone, EPDM, FPM or polyurethane. In terms of quantities as well as dimensions, the sky's the limit, because we can manufacture almost any quantity required, from special solutions in quantities of one to medium-sized small batches and large series of more than 10,000 units.

Wood fiber cutting board LUBECK use various natural materials and pressed under extremely high pressure and heat, so the cutting board is exceptionally strong, but still retains the texture and natural appearance of the wood. It has a high-density surface and non-absorbent properties, which effectively prevents mildew and bacteria.

Since the development of coil springs in turret tooling, engineers have been challenged to increase the productivity of turret presses even further. In a traditional press, the option of material type and material thickness is limited by the coil springs inability to produce a high force in a short linear distance. When this performance is necessary, coil springs will have a negative effect on the quality of the formed product and efficiency of the manufacturing process. SPIROL® Disc Springs are the solution to form thick materials, large extrusions, and more complex designs. When stacked in series, they are capable of providing a greater, more consistent stripping force than coil springs and require less space. They have become an instrumental component in the advancement of turret punch press tooling. Visit www.SPIROL.com to learn more!

SPIROL's DP100 Straight Pins have smooth outer diameters with no retention features such as knurls or barbs. When used as a press-fit pin, the DP100 Straight Pin is pressed into a hole sized slightly smaller than the diameter of the pin. SPIROL's DP100 Straight Pins are suitable for press fit in host materials that can withstand compression in the order of 0.05mm – 0.08mm (.002” – .003”). The actual recommended hole size for a press-fit depends on the actual host material. It is for this reason that SPIROL Engineering should be consulted for the recommended hole size when DP100 Straight Pins are intended to be press-fit into an assembly. Straight Pins are a great option for applications that do not require the tight tolerances of Machined Solid Pins or Ground Solid Dowels. SPIROL Series DP100 Straight Pin consists of metric diameters ranging from Ø2mm to Ø6mm and inch diameters ranging from Ø.078" (5/64) to Ø.250" (1/4).

Self-clinch studs (flush head studs) are fasteners that have a serration under the head. At inserting into the metal sheet it presses the displaced material into the rivet ring to secure the fastener. Advantages: • high resistance to torque strain • no damage of coated surfaces - ideal for sheet panels • always vertical to the sheet • head is flush on the metal sheet after insertion

Self-clinch studs are fasteners that have a serration under the head. At inserting into the metal sheet it presses the displaced material into the rivet ring to secure the fastener. Sheet metal fasteners with internal and external threads are especially suitable for working with thin metal sheets starting with 0.5 mm thickness. This reduces the thickness of the elements in general in favour of lower weight and less material. Aft er processing they are permanently connected to the base material. The screwed connecti ons can be removed aft erwards without risking displacement of the fastener. Through this the production processes are rationalized and secured.

We can shape metal materials with our press brake machine with a capacity of 380 tons. We can shape your aluminum, stainless steel and ST series metal sheets in the desired form.

The RUF briquetting systems of the Biomass series process dust, shavings and wooden chips into briquettes of consistently high quality and density. Varying bulk densities are offset automatically during the process. These materials can be pressed into a compact form without the use of binders. It is important that the moisture content of the chips is below 15%, preferably under 12%, and that the chip size does not exceed 50mm. The general rule is that the finer the material is, the smoother and more solid the surfaces and edges of the resulting briquette. The systems can be equipped with a multitude of options, thus optimally adapting them to customer needs. This series offers maximum flexibility. All systems are extremely energy efficient thanks to the innovative RUF hydraulic system. Depending on the model, the machines are equipped with motors ranging between 4 kW and 90 kW. The throughput capacities of the RUF Biomass presses range between 50 and 1,300 kg/h.

The MACFAB 450 baler is great for businesses to compact large amounts of waste. This baler can compact a wide variety of materials such as cardboard boxes, paper, and plastic film. This baler produces a mill-sized bale of up to 450kg of cardboard. Customers' needs dictate whether bales are secured with strapping or steel wire. A great choice for warehouses and factories that produce substantial amounts of packaging waste from received goods. The 450 balers twin compaction cylinders give an even pressing force when compacting material. During transport, we lower the compaction cylinders inside the bale chamber for ease of shipping. There is a hydraulic cylinder at the base of the bale chamber to eject the completed bale onto a pallet.

Hot press for making sheet from plastic granules, 7inch touch panel, pressure monitoring, water cooled heating plates

We reserve the right to make technical changes without notice. Options are machine parts that can only be ordered while buying the machine. Press designed specifically for the production of automotive hoses. A good example for such a tailor-made solution is the HMC 1-25 and the HMC 1-30 with patented C-shaped crimping tool designed for radial insertion of complex hose lines. This special press is an ergonomically designed, low-noise machine that requires no lubrication. It has been specifically devised for the production of hoses for the automotive industry, offering outstanding press forces and precision. With PFC and other optional features, you can adjust the press force to process materials that are easily damaged, producing strong and lasting connections without any need for gluing, screwing or welding.

Featherlight Bike Poncho 'WINDHOEK'Item number: 455.12 Hood with cord. Waist connection with straps. Covered zipper with press-studs. Integrated storage pocket. Material P12/PU 185g Colour Size UNI Standards

Featherlight Jacket 'SPRINGBOK'Item number: 404.12 Covered hood in collar with cord. Breathable backside. Press studs on sleeves. Material P12/PU 185g Colour Size S M L XL XXL 3XL Standards

Featherlight Jacket 'PRETORIA'Item number: 480.12 Rain jacket with hood with cord. Press-studs on sleeves. Material P12/PU 185g Colour Size S M L XL XXL 3XL Standards

High Visibility Heavy Duty Anorak 'SEPPIE'Item number: 406.12 High Visibility Anorak. Reflective striping. Neoprene wind catcher in sleeve. Hood with drawstring and chin protector. Press stud on wedge fastening. Material P3/ PVC400g Colour Size S M L XL XXL 3XL Standards

Machine Manufacturing Industry, Pressing Machine, 42CrMo4-QT Material, 500 Kilograms

Adhesive-free equipment Bonding with the substrate component is carried out without adhesive. These processes are particularly useful for back-injected or back-pressed components, where the decorative material needs to cover component edges.

These rivets can be brought into the right position with one turn. No tools required! Mountable by the press of a finger. Material: PA 6 , UL 94 V-2 Colours: last digits 600 = white last digits 699 = black Further types on written request.

The combination of multiple technologies/procedures in one step is called OneShot technology. Semi-finished products (e.g. renewable raw materials such as natural fibers) and decorative materials (e.g. textiles) have to be handled in one production step to finish a component, such as a door panel. FRIMO has developed a modular system that allows for simple and customized configuration of a OneShot plant with all necessary tools. The following units can be integrated into such a plant: feeding station, heating station, calibrating station, material assembly station, press with OneShot tool, part-removal station.