Prefabricated panels - Import export

The stairs panel is made up of a suitably shaped polystyrene (EPS) sheet, wherein the riser and tread can vary according to the needs of the project. The polystyrene is covered by two electrowelded mesh joined by connectors. This prefabricated panel is reinforced and completed with concrete casting in the special ribs inside the EPS polystyrene.

Parametters: /Thickness: 58 mm / Width: 800 mm / Length: 1200 mm-3200 mm / Average Density:379 kg/m3 / Heat transfer coefficient 0.099 W/m.K / Diffision resistance coefficient 9,7 / Fire response category E ** Application areas: / Partition wall applications / Interlayer applications / Facade applications / Interior (dry and wet volume) applications / Floor and floor applications / Roof and ceiling applications *** Usage places: / 4 seasons Vineyard houses & Village houses & villas (1,2,3 floors) / Wood & Steel structures / Heat and sound insulation where requested / Hotel, Residence, Factory, Residence, Office etc.

Low-slip cementitious adhesive type C1T according to UNE-EN 12004:2017, designed with marble aggregates, cement and special additives that give it ideal adhesion, slip and water retention properties for laying ceramic tiles. USES For fixing tiles, medium/high porosity stoneware, in interior cladding, on traditional plaster supports. Prefabricated plasterboards and panels. Suitable for anhydrite substrates.

The elements of prefabricated structures (sandwich panels, light steel construction elements, roof elements, stairs and corridors for prefabricated multistory buildings) have been designed and painted in advance at the factory and have been dispatched to the site for mounting. Reinforced concrete flooring is required for prefabricated building. The material for the finishing is also supplied to be mounted at the site electrical equipment, lighting, windows and doors, floor covering, sanitary. According to the Project of the customer, the prewired sandwich panels can be manufactured in the factory prior to dispatch. The walls of prefabricated building Sandwich panel outer and inner walls with a high galvanized steel surface (sandwich panel surface steel thickness between 0.40 mm and 1.20 mm.) The sandwich panels are prepainted at the factory. We offer three different types of insulation rockwool, polyurethane or expanded

The software, designed by Schnell Home engineers, makes the production and installation of prefabricated sandwich panels much easier. The software works with AutoCAD and calculates the m² of insulating panels, the optional mesh , the quantities of materials and the necessary manpower hours; executes the production list by listing the number and dimensions of the different sandwich panels to be produced; produces the drawings to be used on site for the assembly and cutting of polystyrene panels (EPS); the cuts are calculated to optimize the production and minimize wastes.

Robotic plant for the production of prefabricated sandwich panels made up of one or more assembling machines working side by side fed by a robot that loads the produced mesh and the polystyrene sheets that have already been cut. Once assembled, another robot placed at the end of the machine, unloads, stacks and binds the polystyrene panels to be used as main walls, partitions and infill walls of prefabricated and industrial buildings.

Mesh welding machine for the production of electro welded meshes supplied by bars and coils. This machine produces electro welded meshes with transversal wires prestraightened and cut to size and longitudinal wires supplied directly from coils. The mesh maximum width is equal to 1250 mm and the length is unlimited. These electrowelded mesh are used for the production of prefabricated sandwich panels.

Machine for the assembly of the (EPS) polystyrene sheet shaped to two external electrowelded mesh. The assembling machine welds the vertical connectors to the two external mesh, producing the prefabricated sandwich panel. This way it is possible to produce all types of insulated panels single panels, double panels and floor panels of different thicknesses, ideal for the construction of residential, commercial and industrial buildings.

Mesh welding machine for the production of electrowelded mesh fed by wires. The automatic wire mesh welding machine can manufacture electrowelded mesh from prestraightened wire, both longitudinal and transversal. The mesh maximum width is equal to 1250 mm, the length is variable between 2000 mm and 6000 mm. These electrowelded mesh are used for the production of prefabricated sandwich panels.

The floor panel is a sandwich panel used for floor and roof coverings, whose thickness varies according to the spans and the design loads. This prefab panel, prefabricated in the factory, is generally completed on site by placing concrete into the ribs and upper concrete casting a sort of a disposable, insulating formwork, whose thickness of polystyrene (EPS) varies according to the requirements of insulation and structural resistance. Alternatively, the reinforcement and casting can be done directly in the factory, as for the prefabricated concrete floors. These insulated precast panels are used for floors of structures completely made with panels; floors of buildings made with prefabricated structures, onsite castings or made with metal structure; floors of prefabricated modules.

The double panel is made of two single sandwich panels, assembled leaving an intermediate crawl space of variable thickness depending on the type of building and the required wall resistance. These panels, prefabricated in the factory, are completed with concrete casting in the central crawl space the double panel could therefore be defined as a disposable, insulating formwork, whose thickness of polystyrene (EPS) sheets varies according to the insulation requirements. Externally, the double panel is completed using traditional plaster. This insulated precast panel is mainly used for main walls in structures completely built with insulating panels; main walls in structures with wooden roof or any other material.

JS INTEGRAL manufactures control panel enclosures for stationary machines and enclosures based on technical documentation provided by the customer, complying with the relevant requirements of PN-EN standards, including mining standards. Enclosures are intended for prefabrication of machine operator control panels, signal-control panel and control boxes, which are assembled on stationary machines and devices used in: • brown coal strip mining • mining and processing of mineral resources • different areas of the manufacturing industry, including the production of building materials • infrastructural and other facilities

JS INTEGRAL manufactures control panel enclosures for self-propelled machines based on technical documentation provided by the customer, complying with the relevant requirements of PN-EN standards, including mining standards. Enclosures are intended for prefabrication of machine operator control panels, signal-control panel and control boxes, which are assembled on self-propelled machines used in: • mining of metal ores, especially copper ores • mining and processing of mineral resources • tunnel construction • infrastructure construction in road works, earth works and others

Wall Panels are Reinforced Wall Elements that may be used on interior and exterior walls of any concrete, steel, wooden and prefabricated structure. These panels can be applied by being assembled between columns as well as on their interior and exterior surfaces. This property of Horizontal Wall Panels enables diverse architectural facades with different functions and preferences. They can be easily and rapidly assembled by means of assembly apparatuses and crane. Reinforced Wall Elements are designed and produced in such a way to endure different wind and earthquake forces to which they might be exposed. *Length: Maximum 600 cm. ( ≤ 600) *Height: 60 cm standard (max) *Thickness: 10 – 30 cm (with +2,5 cm intervals) *Available densities are G3/500, G4/600 and G4/700

The award-winning Alimak Mammoth is the world’s largest construction hoist. The large-scale hoist provides the ideal vertical access solution for efficiently transporting large prefabricated pods, external cladding panels and other bulky materials to the desired levels of a construction site to increase productivity. It is also ideal for the transportation of a large number of passengers during peak times and emergency evacuations. The modular design of the Alimak Mammoth range offers true flexibility through custom design options built on a twin-masted system. Installation and jumping are rapid without the need for counterweights. The car-size, capacity and lifting height are all customisable depending on the requirements and parameters of a project.

FIX-PA Precast Concrete supports system is specially designed for the secure and fast installation of prefabricated concrete panels onto load-bearing structures

One of the products of MODSTEEL is light gauge steel structures in other words prefabricated buildings or panelised structures. MODSTEEL is one of the leader company in this field with its machinery park and experienced engineering team. We manufacture any kind of tailor made structure according to customer wish with our unique process management in accordance with the national and the international standards and following high engineering methods and technologies. Therefore, MODSTEEL creates cost, optimum design, fast production, high quality, best after sales support advantages to its customers. We can design and manufacture prefabricated panel type steel buildings as one-story, two-story, three-story or four-storey according to customer wish. Also, structural design is flexible, because of that design can be changed upon customer request. Panels can be removed or relocated easily.