Positioning equipment - Import export

2 and 3 axis tilt turn welding positioners for lifting, tilting and rotating the workpiece. The perfect automated solution for lifting, tilting and rotating workpieces of various capacities, shapes and sizes 360 degrees. Key Plant welding positioners are designed to significantly improve the productiveness of your welding and fabrication process. They increase quality and consistency of the weld, both by hand and automation. Their easy to use operation and accessibility with integrated equipment; also significantly enhances operator ergonomics. Available to buy and hire Comprehensive stocks Extensive capacity options Worldwide delivery

Particular Challenge: For the assessment of rotating parts, numerous parameters have to be taken into consideration: Concentricity, radial run-out and axial run-out (i.e. wobble); furthermore thickness, diameter, planarity and the absence of surface defects had to be examined. The solution developed by QuellTech consists in a configuration of three Q6 Laser Laser Scanners.Each of the lateral surfaces is assigned to its own scanner. In order to enable the thickness precisely to be determined, both laser lines are mutually oriented in opposite direction. The third scanner inspects the outer circumference of the wheel, this way measuring diameter and radial run-out. All of these scanners are subject to encoder signals supplied by the rotary axis and synchronously triggered, so possible defects on the wheel can precisely be localized. The measurement takes place at a resolution of ca. 30 µm, and a cloud comprising several millions of points are obtained.

The high-performance optoNCDT ILR2250 laser distance sensor is used whenever large measuring ranges and high accuracy are required. The optoNCDT ILR2250 can be installed at distances up to 100 m, and even up to 150 m with a reflector film. This sensor impresses when measuring dark, structured and poorly reflecting surfaces, while providing stable measurement results to millimeter accuracy. The optoNCDT ILR2250 laser distance sensor is used in transportation, logistics and conveyance technologies as well as automation and the metals industry. This is where the sensor enables reliable measurement results even when it is, e.g., installed at a safe distance from heat emitting measuring objects. In addition, difficult-to-access places via mirrors or through glass sheets can be detected.

Universal test tube rack with retention system. Allows all test tubes to be emptied simultaneously. Suitable for test tubes in most standard diameters. Alphanumerically marked positions for specific identification of samples. Test tube rack with 24 storing positions without retention system.

ELECTRICAL ELEVATOR WITH FRONT TIPPING BY 85° FPLTM10E The elevator-tilter for dump boxes with hydraulic pump driven by the rudder allows operators to lift and fold up to a maximum of 85° each type of fork mounted container (plastic, metal, wood) and to withdraw/deposit products with maximum safety. The height of a pick-up is about 1000-1200 mm. (Depends on the level of tipping) and allows operators to maintain an ergonomically correct position. Equipped with sturdy steel frame with fork tip rounded, steering wheels in polyurethane with parking brake and foot protectors. OPERATION: After braking the wheels, for lifting it is sufficient to press the button on the rudder which regulates the ascent and descent of the forks. The tilting is done by pressing the buttonhole located on the rudder, the UP button tilts the load to the operator, while the DOWN button will lower it again.

GALVANIZED PALLET BOX FOR GAS CYLINDER STORAGE The galvanized cylinder pallet allows the storage of up to 12 cylinders in a vertical position. It is equipped with lifting hooks with cranes and safety stickers already included. To facilitate the loading of the cylinders there is a folding platform in embossed plate. The cylinders are held in place by a bar that can be lifted and locked using a steel pin.

ELEVATOR WITH MANUAL TIPPING FRONT A 85° FPLTM10M The elevator-tilter for dump boxes with hydraulic pump driven by the rudder allows operators to lift and fold up to a maximum of 85° each type of fork mounted container (plastic, metal, wood) and to withdraw/deposit products with maximum safety. The height of a pick-up is about 1000-1200 mm. (Depends on the level of tipping) and allows operators to maintain an ergonomically correct position. The trolley is equipped with a lever valve with two positions (lifting and tilting) Placing the lever on the lifting forks are raised horizontally up to 285 mm. from the floor, by positioning the lever on the opposite side starts tilting gradual up to a maximum of 85 °. Sturdy steel frame with fork tip rounded, steering wheels in polyurethane with parking brake and foot protectors.

Properties • no screws, pull-in sleeves or stiffeners in contact with the product on which the product can deposit • all parts that come into contact with the product are suitable for contact with food • continuously welded seams • hinged, lateral inspection hatch, which closes practically without dead space, with replaceable and washable seal • parts in contact with the product made of stainless steel with material certificate 3.1 according to EN 10204 • available for applications in positive or negative pressure or equipped with a fan

White light interferometers use infrared light in the non-visible range (approx. 840 nm wavelength), which means that the measurement position cannot be seen. To visualize the measuring position, Micro-Epsilon systems are equipped with a pilot laser which projects a light spot onto the measuring position. In addition, the pilot laser uses a patented method to provide feedback on the distance in addition to the measurement position. If the measuring object is at the correct distance and within the measuring range, a constant glow is emitted by the pilot laser. If the measuring object is outside the measuring range, the pilot laser flashes.

1. Advanced CNC machining center with servo turning table and 4 servo clamps. 2. Suitable for processing aluminum profiles (up to 3mm thick) and steel profiles (up to 2mm thick) with super fast speed (5m/min) and efficiency thanks to laser technology. High pressure air compressor (1.6Mpa) and cooling station are included. 3. The machine completes milling, drilling, chamfering, slotting and other multifunctional precisely in one time. 4. The work table will be positioned from +90° to -90° variable angle. 5. Automatic lifting safety cover ensures operator safety. 6. Automatic tool change: standard equipped with 6-position hidden tool magazine, standard equipped with 3 tool holders. 7. Operation in Windows environment industrial PC with monitor. Friendly machine interface with user-friendly operation. 8. In line with ERP software, it can perform code scanning and automatic processing.

Professionals who benefit from using lever hoists include construction workers, riggers, maintenance technicians, and contractors. Specifically, lever hoists can be utilized for hoisting loads onto the scaffolding, positioning heavy equipment, pulling vehicles out of difficult situations, and securing loads during transportation. They offer a portable and versatile solution for lifting and pulling heavy loads, providing a high mechanical advantage and precise control over the operation. Ronix RH-4111 is designed in such a way to not only excel in all of the aforementioned scenarios but offer numerous safety and quality-of-life benefits as well. Keep scrolling to learn more about its main features and capabilities.

Designed for extreme ambient conditions, the sensors of this EGE product family have been proven for more than 40 years in the most varied areas. The proximity switches are based on the conventional inductive principle and switch when a metallic object moves close. These inductive sensors cope without problems with constantly changing temperatures, flooding, vibration, cleaning processes using high pressure cleaners and temperature up to 120°C. These properties are, for example, in demand when used in the steel industry. Because our sensors are always flushed with rolling emulsion during operation, the chemical resistance of the materials used and a high IP class are also essential. They are also ideal for outdoor applications.

These Wholesale Himalayan Crystal Salt Lamps are believed to create negatively charged ions in the air. This is a good thing because modern day pollution and electrical equipment create positive ions in the air which are potentially harmful to us and cause air quality in areas affected to deteriorate. By using a Himalayan Crystal Salt Lamp you replace the negatively charged ions in the air which help us to avoid the alleged physical and mental harm that the ‘electric smog’ creates. Each Wholesale Salt Lamp comes complete with light fitting, bulb & plug. Rather than sell them by size we sell them by approximate weight. Items are marked with sizes to give a rough idea of size only, each lamp is completely unique.

New generation world-class turning center, QUICK TURN NEXUS II series with 8” chuck. Equipped with 12-position drum turret and NC tailstock designed for high efficiency turning of chuck/shaft workpieces and LNS Quick Load Servo Bar Feeder

The SHS combines a hinge and safety switch in one single functional unit. — System up to performance level e: 2 SHS, each equipped with a positively opening safety contact — The angle range extends from 0° to 225° — Safety device ensures positive locking after the switch has been set

The range of conveyor belts (monomaterial or positively driven) can be equipped with accessories to meet specific needs: profiles, sidewalls, scraper, perforations…

It has a long track record as a position detection switch for Steel equipment, chemical plant equipment, cranes for cement manufacturing equipment, and carts, and contributes to improving poor contact. A limit switch that uses Bestact (R25) for the built-in contact. It is resistant to environmental influences such as dust, gas, high temperature, and high humidity, and has outstanding contact reliability. Demonstrates reliability in a wide range of applications, from signal-level minute current circuits to inductive load switching power circuits.

Positioner is designed in order to change the piece’s position, tied onto it, to the best and weld. It gives movement opportunity on two independent lines which are rotating and angular positioning. Positioners can be fixed to the ground according to weight and center of gravity of the work piece. Flange rotating speed can be sensitively adjusted with the control. Optionally it can be adapted with Column-bom system as to work synchronized. Rotator and positioning motors are equipped with thermic protector separately.

Your #1 source for welding automation and positioning equipment hire. We will not be beaten on price. Key Plant will undercut any genuine quote. We have comprehensive stocks of high quality and reliable weld automation, handling and positioning rental equipment. From welding rotators, tank turning rolls and welding manipulators to pay by the hour, plug and weld robotic welding cells – find your ideal rental solution today. A major advantage we have over our competitors is that, as the manufacturer we have the ability to keep an extensive level of available ‘rent-ready’ stock. A rental department built over 65 years. Short or Long Term Project? Perhaps you have equipment that requires maintenance or a refurbishment, but cannot afford production downtime? We offer affordable rental solutions to help you keep your production at an optimum level. Rental also enables you to evaluate your needs before purchasing.

The transmitter converts the tilt angle into a direct current signal, proportional to the angle. Tilt angle values of a platform stand for important measuring data as a part of the safety and control system of that type of machinery. • Robust magnetoresistive angular position transmitter, conctact free, freely rotatable without stops • With oil-damped pendulum system • The sensor is contact free and has minimal abrasion on the pendulum • Measuring range, sense of rotation and zero position programmed directly at the transmitter

The KINAX N702-INOX Series of Tilt Sensor, manufactured by Camille Bauer Metrawatt AG, is specifically designed for robust heavy-duty utilization. This device is configured as a high robust and absolute inclination transmitter. It is mainly suitable for hostile areas applications. Moreover, this tool is made from sealed stainless-steel enclosure design and has an intense mechanical strength to generate more efficiently, and offers high installation versatility.

Converts the angular position of a shaft into a load independent direct current signal, proportional to the angular shaft position. • Robust transmitter for angular position suitable for field applications • Highest degree of mechanical and electrical safety • Proven capacitive scanning system • No wear, low annual maintenance and mountable anywhere • Vibration and shock-resistant • Measuring range, sense of rotation, zero position and linear/V-characteristic can be adjusted by a switch and two push-buttons • Analog output signal 4…20 mA, 2-wire connection • Zero position and end position are independently adjustable • Capacitive scanning system provides absolute position immediately after activation • Suitable for ocean-going vessels acc. GL

The KINAX N702-INOX HART is a very robust, absolute inclination transmitter. It is particularly suited for harsh environments due to it is high mechanical strength and the hermetically sealed stainless steel housing. • Hermetic watertight and dust-proof housing IP68 • Resistant to aggressive media such as sea waterand detergent • Stainless-steel housing INOX AiSi 316Ti (1.4571) • High measuring accuracy (±0.2°) • Steadfast to high mechanical loads due to robust design and high-quality materials • Safe electrical connection by flexible signal line • Standard synchro flange or mounting plate • 2-wire connection via flexible signal line • HART compatible • Simple parameterization via standard Common Practice Commands without additional DD

The transmitter converts the tilt angle into a direct current signal, proportional to the angle. Tilt angle values of a platform stand for important measuring data as a part of the safety and control system of that type of machinery. • Robust magnetoresistive CANopen angular position transmitter, conctact free, freely rotatable without stops • With oil-damped pendulum system • The sensor is contact free and has minimal abrasion on the pendulum • Pendulum shaft has no mechanical stops and can be 360° infinitely rotated • Reduced wiring expenditure • Autoconfiguration of the network • Comportable access of all instrument parameters • Instrument synchronisation, simultaneous data read-in and read-out

• Robust transmitter for angular position suitable for field applications • Highest degree of mechanical and electrical safety • Capacitive scanning system provides absolute position immediately after activation • Measuring range and sense of rotation can be adjusted by a switch and two push-buttons • Zero position and end position are independently adjustable • Linear and V characteristic of the output value free programmable • No wear, low annual maintenance and mountable anywhere • Vibration and shock-resistant • Analog output signal 4…20 mA, 2-wire connection • Explosion protection acc. ATEX and IECEx • Suitable for ocean-going vessels acc. GL

• Robust transmitter for angular position suitable for field applications • Highest degree of mechanical and electrical safety • Proven capacitive scanning system • No wear, low annual maintenance and mountable anywhere • Vibration and shock-resistant • Measuring range (zero point and end position) and sense of rotation via Modbus/TCP adjusted

The transmitter converts the tilt angle into a direct current signal, proportional to the angle. Tilt angle values of a platform stand for important measuring data as a part of the safety and control system of that type of machinery. • Robust magnetoresistive angular position transmitter with interface SSI, contact free, freely rotatable without stops • With oil-damped pendulum system • The sensor is contact free and has minimal abrasion on the pendulum • Measuring range, sense of rotation, zero position and measuring span programmed directly at the transmitter

The MIXACO discharge stations are used for dust free emptying of the product into the further processing step (e.g. dosing system into an extruder). The container is fixed in place when moved into the discharge station. Two different executions are available: Type Guide fork Type Platform Differentiated by the way of feeding the container. Type Guide fork The movable container is pushed by means of its own wheels into the discharge station type guide fork and is locked in place. A pneumatic coupling is used to connect the discharge pipe to the container discharge valve. Type Platform The container is placed onto the emptying station with the aid of a lifting device (crane or forklift). Equipment Positioning of the container Pneumatic coupling between container and the further production step Pneumatic rotary cylinder for automatic opening / closing of the container discharge valve (0/90°)

The GAGE-CHEK 2000 evaluation unit is particularly well suited for positioning tasks on measuring devices and positioning equipment, and for the retrofitting of measuring machines for the capture and transfer of data to a PC. Design Thanks to its rugged industrial design, the GAGE-CHEK 2000 is superbly suited for applications in measuring rooms as well as in harsh production environments. Its slim aluminum housing with integrated power adapter and fanless passive cooling system is exceptionally sturdy and resilient. The unit’s straightforward touchscreen, made of specially hardened glass, supports multitouch gesture control and permits operation with gloves.