Plywood - Import export

Manufactured from the highest quality hardwoods and softwoods. It consists of multiple veneer layers, in which the fibers are arranged perpendicularly. It is glued with phenolic resin glue. Resistant to harsh weather conditions and water.

Hardwood plywood is produced from selected raw material, so there is less dusting during processing, the edges after cutting are very precise, and the engraved details are extremely clear and accurate. It is also available with melamine film.

Cement-bonded particleboards are used in "dry installation" technology. Thanks to their parameters, they are used in construction, including in structural elements. CW panels are fireproof - according to the European standard EN 13 501-1 they are classified as BS1D0 (flame retardant) and A2 (non-flammable). They have soundproofing properties (30-35dB). They are resistant to various atmospheric conditions, such as frost or moisture, to mold and mildew, and thanks to their cement content - also resistant to insects. Cement-bonded boards are a resilient material - the modulus of elasticity of the boards is more than 4500 N/mm2, the bending strength is greater than 9 N/mm2. They are easy to work with, as well as environmentally friendly and safe for health, as they do not contain any hazardous substances such as asbestos or formaldehyde.

All shuttering boards are coated with a special phenolic film, so that concrete does not stick to them and they are waterproof. Protecting the edges with acrylic paint further prevents moisture penetration. They provide a smooth concrete surface after formwork. Poplar Class A - a board made of the highest quality poplar, the center without inserts, with a double-pressed phenolic film Poplar Grille - slab made of very good quality poplar with double-compressed phenolic film Poplar recycled - recycled board of very good quality

The three-layer bonding guarantees high measurement accuracy. Each of the three layers, both the longitudinal outer layers and the diagonal inner layer, is waterproof. They are covered with a special coating of melamine resin, which prevents concrete from sticking and makes them easy to clean, and with paint, which provides protection against harsh weather conditions. Thanks to the sanded surface, the concrete structure is perfectly smooth after formwork. Pfeifer formwork panels are available in both wrought with front edge protection and unwrought versions.

OSB/3 is made from pine chips, which come primarily from nurturing forest clearcuts. In the outer layers, the chips are arranged parallel to the longer side of the board, while in the inner layers they are arranged perpendicularly. This microstructure gives it high rigidity and resistance to bending. Thanks to the use of modern technologies, the board is characterized by excellent parameters. It is easy and inexpensive to process, resistant to harsh weather conditions, and provides excellent acoustic insulation. A big plus is also the ease of its installation. It is available in two variants: with straight edges and with four-sided tongue-and-groove milled edges.

The outer layer, 1.5 mm thick, is made of birch or pine veneer. Joinery board is available in two types of bonding: dry-resistant with a urea-formaldehyde resin-based bond for use in dry conditions, and water-resistant with a phenol-formaldehyde resin-based bond for use in wet conditions. The blockboard is lightweight and easy to work with, resistant to deformation.

Waterproof, covered with a hot-pressed phenolic film with a mesh imprint. Inner layers can be of hardwood veneers (homogeneous) or a combination of hardwood and softwood (combi). High resistance and excellent surface protection against mechanical and chemical damage. This product is also available in a non-flammable version in the Bfl-s1 standard.

It is a hardwood, waterproof plywood covered with melamine film, which is a paper impregnated with resin. It is pressed onto the plywood at high temperature, under high pressure. The advantages of film-faced smooth plywood are high mechanical strength, UV resistance and biological durability. In the non-flammable version in the Bfl-s1 standard, it is excellent for construction and interior finishing as a structural and non-structural material. Polish product.

It consists of multiple veneer layers, in which the fibers are arranged perpendicularly. It is glued with urea-formaldehyde resin, meeting the E0.5 standard according to PN-EN 636 for formaldehyde emissions. It makes an excellent construction material. Dry-faced raw plywood is designed for use in dry conditions.

Plywood made of 100% poplar wood, produced on the basis of dry-plastic joint in a longitudinal arrangement of fibers.

Thick pine plywood, produced on the basis of waterproof joint

100% poplar plywood manufactured on a dry bond basis and additionally covered with HPL laminate

Pine or pine-alder plywood, manufactured with waterproof or dry-plastic joints

Birch or birch-alder plywood with a density of 640-760 kg/m3, produced with a waterproof (phenol-formaldehyde) or dry-plastic (urea-formaldehyde) bond. Available in longitudinal or transverse fiber arrangement. Used in construction, furniture, joinery and woodwork, among other applications.

Plywood made of 100% birch or birch-olive wood, manufactured with waterproof weld, covered with dark brown phenolic film.

Poplar and eucalyptus plywood in maple veneer manufactured on a dry-jointed basis and coated with a clear UV varnish.

PAGED SOFTWOOD THICKPLY - SPECIFICATIONS Paged Softwood ThickPly is made of selected specific thickness Polish pine and offers its users high durability and resistance to mould and UV lightening at a reduced total weight of the panel. Thanks to its high load-bearing capacity, smooth and uniform surface Paged Softwood ThickPly is widely used in construction and packaging industries. PAGED SOFTWOOD THICKPLY – KEY BENEFITS Main application areas include: construction, interior cladding, wall sheeting and panelling, flooring and sub-flooring; packaging and industrial applications. Easy to machine Weather and boil proof gluing Light and dimensionally stable Strong and rigid Made from responsibly sourced wood in Poland PAGED SOFTWOOD THICKPLY – MACHINING Edge machining, CNC machining and drilling on request.

It makes an excellent construction material. Dry-faced raw plywood is designed for use in dry conditions.

Fibreboard is produced by the wet process from semi-finished wood products from forestry cultivation cuttings and residues from the wood processing industry. Soft, porous fibreboard is most often used in the construction industry, while hard fibreboard is used in the furniture and packaging industry. They have high compressive strength and provide good insulation.

They are easy to work with, as well as environmentally friendly and safe for health, as they do not contain any hazardous substances such as asbestos or formaldehyde.

CW boards are fireproof - according to the European standard EN 13 501-1, they are classified as BS1D0 (flame retardant) and A2 (non-flammable).

Cement-bonded particleboard are a versatile building material that is an ideal combination of the properties of cement and wood. They are lightweight and easy to work with, while being extremely durable and resistant to various weather conditions.