Damper - Import export

The GBL iris dampers are essential for smooth control of the duct air pressure. The lever and the iris regulating plates mechanism allow smooth adjustment of the diameter of the orifice(opening). The iristype closure allows throttling of the air flow without turbulence or induct noise. The GBL iris damper can be installed both in air supply and air exhaust ducts. Each Iris damper is provided with two manometer connections. The GBL can be opened to the full clear diameter for easier cleaning of the ductwork. The iris dampers, however, cannot be sealed shut (the maximum closing ratio is ca. 25% of the nominal clear diameter).

The FDA12 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification f construction products and building elements). The fire resistance was tested as per PNEN 136622001P (Fire resistance tests for service installations Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA12 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN100, DN125, DN160, DN200, DN250, and DN315. All fire dampers have a pull spring control gear and a fusible thermal trip (in FDA12T) or a returnspring actuator coupled with a thermal trip (in FDA12M).

The DSQWA rectangular multiblade aluminium dampers can be used to control and isolate air flow in rectangular ductwork. The dampers can be installed in ventilation ducts, as wallmounted air flow regulators, or AHU air flow regulating and shutoff units. All dampers have a housing made of 4 aluminium profiles and a closure consisting of aluminium blades. The blade height is the same for all product sizes. The blades are fitted with gaskets to provide air tightness class 2 as per EN 17512003. The DSQWA damper can have a handoperated damper mechanism QDMPSAL, an externallymounted actuator, or an actuator mounting. The damper mechanism is installed on the outer surface of the housing. The damper blade rotation mechanism features short and long shafts rotating by intermeshed gears installed on bearings. The gears are installed on the outer surface of the housing.

The DAOS dampers feature a split flap closure and allow the air flow to pass in one direction only. The aluminium closure flaps are pressed against a foam seal when closed to reduce the operating noise in the ductwork. The split flap closure is held closed with a spring gear, which makes it also possible to use the damper in vertical installations. A version intended for a fullmale insertion into the ductwork ends is available on special request.

The DATL/DAT dampers are designed for cladding with up to 50 mm thick insulation. The DATL/DAT dampers are a good choice when the ductwork closure must be airtight. The damper closure position can be read on the 0° to 90° dial of the control handle. The damper closure opening ratio can be fixed with a screw. DAT — airtight shutoff damper DATL — airtight shutoff damper with gaskets at flanged ends All DATL/DAT dampers of diameter 355 mm or greater have the damper closure pivot provided with extra bracing. All DATL/DAT dampers of diameter 450 mm or greater are supplied with the KITDSH damper mechanism control lever. Standard dampers are made from galvanized steel sheet.

The fire dampers are manufactured in the following nominal sizes DN100, DN125, DN160, DN200. The fire dampers are equipped with a thermal fuse mechanism ensuring the damper switch to the safe position in case of reaching an ambient temperature equal to or higher than 72°C. The fire dampers allow using limit switches signalling closed position of the damper blade (1 limit switch) or blades (in case of using 2 limit switches). The casing is made from galvanised steel sheet; the fire damper blade is made from a silicate cement board.

The FDA12 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification f construction products and building elements). The fire resistance was tested as per PNEN 136622001P (Fire resistance tests for service installations Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA12 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN100, DN125, DN160, DN200, DN250, and DN315. All fire dampers have a pull spring control gear and a fusible thermal trip (in FDA12T) or a returnspring actuator coupled with a thermal trip (in FDA12M).

The FDA212 square fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification of construction products and building elements). The fire resistance was tested as per PNEN 1366 22015 (Fire resistance tests for service installations — Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA212 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal sizes 160x160 – 1000x500 mm. All fire dampers have a torsion spring trip (in FDA212T) or a returnspring actuator coupled with a thermal trip (in FDA212M).

The FDA212 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification of construction products and building elements). The fire resistance was tested as per PNEN 1366 22015 (Fire resistance tests for service installations — Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA212 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN200, DN224, DN250, DN280, DN300, DN315, DN355, DN400, DN450, DN500, DN560, DN600, DN630.

The FDA212 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification of construction products and building elements). The fire resistance was tested as per PNEN 1366 22015 (Fire resistance tests for service installations — Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA212 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN200, DN224, DN250, DN280, DN300, DN315, DN355, DN400, DN450, DN500, DN560, DN600, DN630. All fire dampers have a torsion spring trip (in FDA212T) or a returnspring actuator coupled with a thermal trip (in FDA212M).

PARKANEX adjustable 90* 3-segment elbow for connecting wood-burning fireplace inserts to chimney ducts. The knee has a revision element, the so-called cleaning hole through which you can check the connection at any time. A damper is also embedded in the knee, enabling adjustment of the chimney draft. Thanks to the use of special clamps, the connection of the knee elements is perfectly tight.

PARKANEX adjustable 90* 3-segment elbow for connecting wood-burning fireplace inserts to chimney ducts. The knee has a revision element, the so-called cleaning hole through which you can check the connection at any time. A damper is also embedded in the knee, enabling adjustment of the chimney draft. Thanks to the use of special clamps, the connection of the knee elements is perfectly tight.

PARKANEX adjustable 90* 3-segment elbow for connecting wood-burning fireplace inserts to chimney ducts. The knee has a revision element, the so-called cleaning hole through which you can check the connection at any time. A damper is also embedded in the knee, enabling adjustment of the chimney draft. Thanks to the use of special clamps, the connection of the knee elements is perfectly tight.

PARKANEX adjustable 90* 3-segment elbow for connecting wood-burning fireplace inserts to chimney ducts. The knee has a revision element, the so-called cleaning hole through which you can check the connection at any time. A damper is also embedded in the knee, enabling adjustment of the chimney draft. Thanks to the use of special clamps, the connection of the knee elements is perfectly tight.

PARKANEX adjustable 90* 3-segment elbow for connecting wood-burning fireplace inserts to chimney ducts. The knee has a revision element, the so-called cleaning hole through which you can check the connection at any time. A damper is also embedded in the knee, enabling adjustment of the chimney draft. Thanks to the use of special clamps, the connection of the knee elements is perfectly tight.

PARKANEX adjustable 90* 3-segment elbow for connecting wood-burning fireplace inserts to chimney ducts. The knee has a revision element, the so-called cleaning hole through which you can check the connection at any time. A damper is also embedded in the knee, enabling adjustment of the chimney draft. Thanks to the use of special clamps, the connection of the knee elements is perfectly tight.

The UNIFLAM 700 ECO cast iron fireplace insert is an ecological product - it meets the requirements of Ecodesign. - nominal power: 8 kW - efficiency: 76% - average emission of carbon monoxide (CO): 0.10% - average flue gas temperature: 319 °C - max. length of logs of wood: 50 cm - flue gas outlet diameter: 180 mm - weight: 98 kg

Cast iron fireplace insert - nominal power: 10 kW - efficiency: 77.89% - average emission of carbon monoxide (CO): 0.271% - average flue gas temperature: 218 °C - max. length of wood logs: 50 cm - flue gas outlet diameter: 180 mm - weight: 105 kg

The UNIFLAM 700 PLUS ECO cast iron fireplace insert is an ecological product - it meets the Ecodesign requirements. - nominal power: 9 kW - efficiency: 75% - average emission of carbon monoxide (CO): 0.07% - average flue gas temperature: 315 °C - max. length of logs of wood: 50 cm - flue gas outlet diameter: 200 mm - weight: 98 kg

Fireplace insert UNIFLAM 600 PLUS ECO ref. The 907-597 is an eco-friendly device. Meets the requirements of Ecodesign and the German standard BImSchV2. - nominal power: 8 kW - efficiency: 76% - average emission of carbon monoxide (CO): 0.10% - average flue gas temperature: 319 °C - max. length of wood logs: 47 cm - flue gas outlet diameter: 150 mm - weight: 89 kg

Cast iron fireplace insert - nominal power: 14 kW - efficiency: 72.4% - average emission of carbon monoxide (CO): 0.26% - average flue gas temperature: 318 °C - max. length of wood logs: 50 cm - flue gas outlet diameter: 200 mm - weight: 127 kg

Cast iron fireplace insert - nominal power: 14 kW - efficiency: 72.4% - average emission of carbon monoxide (CO): 0.26% - average flue gas temperature: 318 °C - max. length of logs of wood: 50 cm - flue gas outlet diameter: 200 mm - weight: 127 kg

UNIFLAM 700 STANDARD ECO cast iron fireplace insert with damper ref. 907-705 is an ecological product - it meets the requirements of Ecodesign. - nominal power: 10 kW - efficiency: 77% - average emission of carbon monoxide (CO): 0.12% - average flue gas temperature: 295 °C - max. length of wood logs: 50 cm - flue gas outlet diameter: 200 mm - weight: 125 kg

Cast iron fireplace insert - nominal power: 14 kW - efficiency: 72.4% - average emission of carbon monoxide (CO): 0.26% - average flue gas temperature: 318 °C - max. length of wood logs: 50 cm - flue gas outlet diameter: 200 mm - weight: 137 kg

Cast iron fireplace insert - nominal power: 14 kW - efficiency: 72.4% - average emission of carbon monoxide (CO): 0.26% - average flue gas temperature: 318 °C - max. length of wood logs: 50 cm - flue gas outlet diameter: 200 mm - weight: 137 kg

UNIFLAM 700 SELENIC ECO cast iron fireplace insert with damper, air supply ref. 907-725-DP is an ecological product - it meets the requirements of Ecodesign. - nominal power: 10 kW - efficiency: 77% - average emission of carbon monoxide (CO): 0.12% - average flue gas temperature: 295 °C - air supply: Ø100 mm or 150x50 mm - max. length of wood logs: 50 cm - flue gas outlet diameter: 200 mm - weight: 125 kg

UNIFLAM 700 SELENIC ECO cast iron fireplace insert with damper ref. 907-725 is an ecological product - it meets the requirements of Ecodesign. - nominal power: 10 kW - efficiency: 77% - average emission of carbon monoxide (CO): 0.12% - average flue gas temperature: 295 °C - max. length of wood logs: 50 cm - flue gas outlet diameter: 200 mm - weight: 125 kg

Fireplace insert UNIFLAM 700 LUX ECO with damper, air supply ref. The 907-695-DP is an eco-friendly device. Meets Ecodesign requirements. - nominal power: 12 kW - efficiency: 77% - average emission of carbon monoxide (CO): 0.11% - average flue gas temperature: 310 °C - max. length of wood logs: 50 cm - air inlet: Ø100 mm or 150x50 mm - flue gas outlet diameter: 200 mm - weight: 128 kg

Fireplace insert UNIFLAM 700 LUX ECO with damper ref. The 907-695 is an eco-friendly device. Meets Ecodesign requirements. - nominal power: 12 kW - efficiency: 77% - average emission of carbon monoxide (CO): 0.11% - average flue gas temperature: 310 °C - max. length of wood logs: 50 cm - flue gas outlet diameter: 200 mm - weight: 128 kg