Plastic goods - Import export

OKS 4240 is a special grease for the lubrication of ejector pins in the plastics industry. Lubrication of ejector pins in the plastics industry at high temperatures and slow movements Lubrication of rolling and friction bearings at extremely high temperatures and aggressive operating conditions Advantages and benefits Extraordinarily good resistance to vapours occurring during plastic processing Good plastic and elastomer compatibility Excellent temperature resistance Lowest evaporation losses, also at high temperatures ensure long regreasing intervals Good media resistance Also suitable for fast-runing bearings thanks to low share of solid lubricants

Lubrication of closing devices and taps, as well as ground joints in industrial vacuum and laboratory equipment, if the consistency of other OKS silicone greases is insufficient Advantages and benefits No carbonization, no melting, steam pressure stays negligible up to +200°C Nearly constant consistency between -30 and +200°C No corrosive influence on metals and no softening influence on rubber and plastics Good resistance against solvents and excellent resistance against numerous chemical agents Resistive to cold and hot water, acetone, ethanol, ethylenglycole, glycerine and methanol, most of diluted bases and acids mineral and vegetable oils and numerous organic compounds and almost all usual gases

Self-compacting concrete (SCC), concrete in slump class F2-F6, concrete precast, ready-mix concrete, concrete with very low w/c values and high high slump, prestressed concrete. Special superplasticizers for high exposed concrete quality, with good initial plasticizing action, slump retention and high early strength development at the same time.

For the long time- or for lifetime- lubrication of fast running roller and plain bearings as well as linear guides, threaded and ball screw spindles, small gears and similar components, exposed to high pressures and higher temperatures Advantages and benefits Good adhesive and good media resistant Good low-temperature behaviour, stress absorbing ability and smooth run at high speeds Good plastic compatibility The low start and running moment, especially at low temperatures, enables a high efficiency The good wear protection increases the life time of the part and makes sure a reliable functionFor best results clean the lubrication point with OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection media before initial filling. Fill the bearings in a way that all the functional surfaces are lubricated sufficiently. Slow moving bearings (DN-value < 50,000) should be filled completely. Fast running bearings (DN-value >400,000) should be filled

Lubrication of rolling and friction bearings subjected to high temperatures, corrosive environmental influences Lubrication of bearing points at furnace, cooling-bed and conveyor systems, motors and hot-air fans that are subjected to temperature stress Suitable for lubricating exhaust-gas fans Advantages and benefits Reduces wear and friction Good corrosion protection Excellent temperature resistance When operating temperature is exceeded, forms only minimal residues Good plastic and elastomer compatibility Good resistance against water influence and aggressive environmental influences For optimum effect, carefully clean the lubricating point, for example with OKS 2610/OKS 2611 universal cleaner. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value < 50,000)

Robust version for workshops, test-beds etc. Suitable for hose rollers, drive-over proof, long-term loading up to 160°C, short-term to 190°C. Anti-kink finish due to plastic spiral with very good bending characteristics. Construction: Black EPDM tube Fabric inlays Embedded PA-Helix Black cover Interior smooth, exterior rectangular or round and ribbed coupling both ends In fixed lengths with cuffed ends and/or widened hose endings. Other versions and dimensions on request.

Lubricating and sealing off tap cocks, labyrinth seals, stuffing boxes and packings Lubricating and sealing off fittings made of metal, plastic and ceramic, e.g. drain, cold- and hot-water fittings Long-term lubrication of heavily loaded press and guide plates, for example on telescope booms of mobile cranes As a lubricant for of threaded spindles on radiator thermostats Advantages and benefits Reduces wear Extension of the relubrication intervals High resistance to oxidation Noise and vibration-damping Resistant to cold and hot water, water vapour, lactic, formic, acetic and fruit acid, as well as alkaline and acidic cleaning agents and disinfectants Good elastomer and plastic compatibility For optimum adhesion, clean contamination and other lubricants from slide surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply sufficient paste evenly with a brush, spatula, etc. The paste will also act as a sealant.

Douplex stainless steel is a class of steel that combines excellent corrosion resistance, high strength and ease of manufacturing and processing. Despite their high strength, douplex stainless steels exhibit good plasticity and toughness. And in most applications, douplex stainless steels show high corrosion resistance due to their high chromium content, which is advantageous in oxidizing acids. Therefore, duplex stainless steels are often used instead of austenitic stainless steels in many applications in the chemical industry with a greater risk of corrosion.

Press-In Inserts are designed to be pressed into a straight hole without melting the plastic prior to installation. Ideal for use in softer plastics, the helical knurls of the Press-In Inserts are used to provide both torque and pull-out resistance and to ensure good plastic flow as the Insert rotates into the hole. Installation torque to achieve sufficient tension between the threads is not a problem in that the helical knurls are designed so that the direction of the installation torque will have the tendency to drive the Insert into the hole — which of course is not possible — as the threaded joint is tightened. A pilot only slightly smaller than the hole and of sufficient length is designed to assure straight insertion into the hole. Press-In Inserts offer rapid installation with no specialized equipment and achieve good overall joint performance. If installation equipment is required, SPIROL also offers a standard comprehensive line of Insert Installation Equipment.

100% unfilled PEEK natural PEEK(Polyetheretherketone)is a kind of heat-resistant, high performance thermoplastic special engineering plastics. It has good mechanical properties and chemical resistance, abrasion resistance, and hydrolysis resistance properties etc.; it has a light proportion and self-lubricating properties.Mechanical and automotive engineering, nuclear and vacuum technology, transport and conveyor technology, textile, packaging and paper processing machinery, electronic and precision engineering, food processing. Key Features Temperature: -40°C up to +260°C. Creep resistant and excellent resistance to high energy radiation. Hydrolysis resistant, even against super-heated steam. Extremely strong and wear resistant plastic. Noise dampening. Highly machinable. MACHINING PEEK

Steel C35Pb. Gunmetal Rg7. Plastic PA6.6 with MoS2). ISO trapezoidal thread based on DIN 103. Steel nuts for adjustments during manual operation and as fastening nuts. Not advised for use with motorised drives due to the steelsteel material combination. Gunmetal nuts for motion drives with low and medium speed. By insufficient lubrication, gunmetal trapezoidal thread nuts on steel spindles have good dryrunning properties. Plastic nuts for lownoise motion drives. Good dryrunning properties. Tolerance class 7H.

Lubrication, cleaning and protection of bright metal surfaces, e.g. of precision machine tools, measuring equipment, mechanisms in precision mechanics and optics, of precision instruments Can be used at machine elements of all types, for example sliding parts or slideways, at threads, locks, hinges, joints, drives Versatile use over the full range of care, conservation and maintenance applications Advantages and benefits Highly effective due to good wetting, dissolving and protective ability Good creep properties Behaves neutrally with respect to plastics, elastomers and paints Good protection against corrosion-causing moisture and wetness Resin and acid-free OKS 700 is also suitable for use with the refillable Airspray system

Lubrication, cleaning and protection of bright metal surfaces, e.g. of precision machine tools, measuring equipment, mechanisms in precision mechanics and optics, of precision instruments Can be used at machine elements of all types, for example sliding parts or slideways, at threads, locks, hinges, joints, drives Versatile use over the full range of care, conservation and maintenance applications Advantages and benefits Highly effective due to good wetting, dissolving and protective ability Good creep properties Behaves neutrally with respect to plastics, elastomers and paints Good protection against corrosion-causing moisture and wetness Resin and acid-free OKS 700 is also suitable for use with the refillable Airspray system Also available as spray version OKS 701

For the lubrication of plastic/plastic and plastic/metal combinations, e.g. single-serving taps in the food industry or for beverage can holders in the automotive industry Silicone-free alternative for the lubrication of O-rings and sealings during assembly Advantages and benefits Good compatibility to plastics Constant properties without drying, hardening or bleeding Tested for beer foam compatibility NSF H1 registered MOSH/MOAH-free Silicone-free

The ORBIS IonPak® is a UN certified plastic container that is designed to transport solid dangerous goods (e.g. UN3480). The solution consists of a durable standard container with customised inner packaging. The lithium battery shipping boxes are suitable for non-certified batteries, prototypes, battery cells, battery modules and batteries in equipment. For increased part protection, the shock absorbing interior packaging is adapted to the customer’s product and supply chain. ORBIS’ lithium-ion battery packaging utilises standard footprints designed to interface with customers’ existing supply chains, e.g. 1200 x 1000 mm. - Certified solutions according RID/ADR - Customer-specific dunnage development - Heavy-duty solution for heavy batteries - Comprehensive product protection - Reusable and recyclable - Different footprints available ORBIS Europe supports you through the entire process – from development to certification of your packaging solution.

As a valuable and functional tool, hammers are an essential member of your worksites. But there are numerous types of hammers for different applications and surfaces, like for pounding, tapping, driving nails, pulling them out, etc. Here, we’ll look at Ronix’s brand-new install hammer. Ronix Rh-4740 Install Hammer-Double Head is a hand tool that would make your daily life simpler. The tool’s double-sided head is a pro feature made of top-quality plastic/rubber material, delivering good elasticity and wear resistance. It also gives the user the authority to replace the hammerhead’s design. The handle is made of a strong fiberglass PP-TPR material, and its non-slip grip prevents slipping in hands and helps absorb vibration. Check out the detailed description to get more information on this top-notch install hammer

Imitation natural leather, otherwise artificial leather produced by us on a PVC basis. Stock replenished on an ongoing basis. An upholstery material of excellent strength and resistance. Wide range of colours. Used as an upholstery material. Model favoured by companies producing fashionable sack-type seats filled with polystyrene balls (sako bag / bean bag) and dog beds for both homes and cars. As a manufacturer, we can match the colour and technical specification to our customers' requirements.

We have the one of the most up-to-date injection molding machine design. For example the construction of clamp pistons tighten centrally and working even without lubrication. Our plastic molding machines have wide column intervals and we provide them with euromap standards. With the help of proportional controlled valve direction you can achieve fast opening-closing possible with our plastic injection machine. Same point precision stop is possible with our molding machines. Also we have standard size holes and T slots according to Euromap standard on plates for injection mould changing. Our customer can have almost zero defects, scrap and failures with our plastic molding machines. Wit the help of our user friendly software, operator work pretty easy during plastic injection process.

Our rattan extruder machines have different production capacity range and also capable to produce different rattan sizes, so that we can match different demand. You can produce with our rattan extruders different final product such as furniture and decoration etc. Plastic rattan raw material is mostly PE. PE has the highest stability if you compare with other plastic rattan raw materials alternative. Other most common raw materials for plastic rattan extrusion are PVC and PU. Where you can use plastic rattan ? - Rattan Chair - Rattan Table - Rattan Sofa - Rattan Coffee Table - Rattan Bench Just contact with us for your rattan extrusion machine research, we will provide the optimum solution for your research.

Our plastic strap production lines have different capacity options according to our customer's request. We have alternative solutions for plastic strap making machine with different capacity, price level and working raw material options according to our customer’s request. Plastic straps are used mostly in packaging process. PET or PP straps are used mostly in packaging process. Plastic strap extruder machine can work with raw material as PET and PP etc. Our plastic strap production line has different working speed options according to requested production capacity by our customers. Just contact with us for your plastic strap production line research, we will offer you the best and optimum solution.

We offer our Plastic Extruder Machine Lines for various industries, including construction, food, healthcare, white appliances, and automotive sectors. The most common raw materials used on our plastic extrusion machine lines include PVC, HDPE, PET, EPDM, PP, EPS, LDPE, PE, ABS, PC, PS, and others. We provide as standard Plastic Extruder Machine Lines WPC Extrusion Machine Strap Extrusion Machine Sheet Extruder Machine Rattan Extrusion Machine Polystyrene Extruder Machine Polycarbonate Extruder Machine Edge Band Extrusion Line Gasket Sealing Extrusion Machine As Technic Machines, we offer our customers optimal solutions for their specific needs in plastic extruder machine research. We provide custom solutions using twin screw extruders, single screw extruders, triplex extruders, or co-extruders. Our specialized extrusion line solutions are tailored to the final product requirements of our customers.

We design our plastic recycling machine to give best solution for waste plastic recycling process with minimum energy consumption. According to our customer's request, we offer different capacity options. Our plastic recycle machine is used mostly for plastic film and bag recycling process. It can work with raw materials such as PE, PP, PVC, HDPE, LDPE, Polythene, Polystyrene PET and etc. As tp market demand, we design our machine for working even with pretty dirty waste plastic film and bag. Also we offer our customers fully automatic or semi automatic solution. So, we provide for our customers, the plastic recycling machine according to their requirements. Plastic recycling line main units, – Bale Opening Unit – Shredder Unit – Helezons – Washing Systems – Separator Units – Screw Loading Units – Friction Washing Units – Dewatering Machinery – Agglomeration System – Granulating Machinery – Big Bag Filling Unit

-Material:PP -Size:32×10.5 cm -Available colours: (a) Normal colour: bright red,sapphire blue, dark blue,black, light purple,pink,green,khaki (b) Other colours are available, please supply us your needing PANTON CARD -Pack:50pcs/57×31×38 cm - Logo:Available (but need your minimum order quantity have to be up 500 pieces -for normal colours; for special colour ,need your Minimum order quantity is 1000 pieces )

-Material:PP -Size:32×10.5 cm -Available colours: (a) Normal colour: bright red,sapphire blue, dark blue,black, light purple,pink,green,khaki (b) Other colours are available, please supply us your needing PANTON CARD -Pack:50pcs/57×31×38 cm - Logo:Available (but need your minimum order quantity have to be up 500 pieces -for normal colours; for special colour ,need your Minimum order quantity is 1000 pieces )

-Material:PP -Size:32×10.5 cm -Available colours: (a) Normal colour: bright red,sapphire blue, dark blue,black, light purple,pink,green,khaki (b) Other colours are available, please supply us your needing PANTON CARD -Pack:50pcs/57×31×38 cm - Logo:Available (but need your minimum order quantity have to be up 500 pieces -for normal colours; for special colour ,need your Minimum order quantity is 1000 pieces )

Factory Custom Cheap Good Price Plastic Bathtub Portable Soaking Bath Tub Place of OriginShanTou, China TypeTubs CoverWITH LID ProductGeneral Bath Barrel Age GroupAdults FeatureSustainable, Stocked Model Number: BK203245789 Product Namefoldable bathtub MaterialPP+TPE Size140X65X55.9cm Volume250L Water TypeFree-standing Bathtub ApplicationIndoor Tub FeatureEco-friendly Material PCS/CTN1PCS Guarantee10years keywordAdult Bath Tub

We are a company specializing in shoelace plastic tips. Our product enjoys good quality, brilliant look and reasonable price. If you are intersted, please contact us! Specification: Product NameShoelace Plastic Tips ModelPTW4022 MaterialABS ShapeBullet Diameter/Length4.0*22mm FeatureAdjustable,colorful,durable,accept customized color and size Colorwhite MOQ10000pcs UsageShoelace/Garment/Hand Bag/Gift Bag Payment TermsT/T,L/C& PayPal Delivery TimeAbout 10-25 days (depending on the order qty) ShipmentBy express (DHL, EMS, TNT,UPS, FEDEX)/by sea, etc. FOB PORTShanghai, Shenzhen, Ningbo Place of OriginShanghai, China After-sales ServiceWe value after-sales service, we promise repairing, replacing and refunding if there’s any quality problem of our products

With its rubbish chutes Standard and Comfort, GEDA offers a universally applicable rubbish chute system without any limits. Compared to ordinary rubbish chutes, the wear-resistant GEDA rubbish chute COMFORT has an extremely long working life thanks to its 6mm walls and the additional 3mm anti-wear ribs. High quality made of highly shock-resistant plastic! As a good-value alternative we can offer you the GEDA rubbish chute Standard. It is made of high-quality plastic (4mm wall thickness). Both version are equipped with a double hook. This allows for quickly fixing them in a safe way for being used on walls, scaffolds, inclined roofs or flat roofs. The various fixing devices guarantee short put-up times and therefore allow for efficient work. Furthermore, practical accessories allow for dust-free work (e.g. in downtowns) or working simultaneously on several levels.

CO2 laser marking systems are part of the gas laser group: the laser beam is generated in an enclosed laser tube which is filled with carbon dioxide. The REA JET CL is suitable for the marking of packaging, glass, wood, plastics, PVC, anodized aluminum, the color removal on surfaces as well as direct marking of foods. In the creation of texts, graphics and characters there is complete freedom of design. Applications — Marking of glass, wood, rubber, engraving and color change marking of plastics (automotive, medicine, consumer goods) — Coding of cardboard boxes and outer packaging (e.g. in the pharmaceutical, cosmetic and food sectors) — Coated substrates (e.g. anodized aluminum) — Direct marking of foodstuffs — Laser color change marking — Color mirror engraving