Results for
ROTA MACHINERY MANUFACTURING CONTRACTING
Turkey
Penetrant non-destructive testing method is a system that is used for the detection of cracks in the surfaces of parts. After the material which is going to be subjected to penetrant test is pre-cleaned, it is subjected to penetrant application as dipping or spray. After this process, the material is rinsed and dried. Powder “developer” is applied electrostatically on the dried material. Finally, possible cracks and faults on the material are detected by checking under the UV lamp.
Request for a quoteIGUS® GMBH
Germany
The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes Chip tests in the igus® laboratory demonstrate the tremendous chip-proof properties of the igus® RX tube. Chip-proof - for all types of chips and applications RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips Submersion test in water - Various tube types were submerged under water. The new RX tube needs over 30 seconds until it is filled up, thus proving its high leak tightness Y = time in seconds A = igus® products B = competitor Chip penetration test - Various types of tube were exposed to a defined quantity of chips. In the new RX tube, after 80,000 cycles only 0.2 g of chips were found in the interior Y = chip mass [g] A = igus® RX e-tube RX40.100.100 251.900 cycles B = igus® e-tubes 68.10.100.0 256.132 cycles C = test tube 01 250.907 cycles D = test tube 02* 2.600 cycles *Teststop after 2.600 cycles E = igus® products F = competitor E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Productfinder Assembly instruction Dismantling / assembling a cover, replacing a chain link and assembling / inserting the RX tube. Assembly instruction Configure interior separation Define cables, select chain and configure interior separation. Now also for RX tubes! Interior separation configurator Application examples Applications in various industrial sectors. RX tubes Series RX - new chip-proof design, small pitch, removable cover 1 Chip-proof design without undercuts and edges 2 Excentric locking 3 Material igumid G 4 rounded shape 5 covered pin/hole connection RX tubes IP tested Technical report TÜV NORD red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips
Request for a quoteKASAG SWISS AG
Switzerland
Our specialists have vast knowledge and many years of experience in non-destructive testing (NDT) of welding seams, welding constructions, pressure vessels, containers, equipment and plants. We use and offer the following testing procedures for that purpose: X-rays RT Dye penetrant testing PT Visual inspection VT Material testing/ Positive Material Identification PMI Helium leakage testing LT Riboflavin test Pressure tests of up to max. 1000 bar Surface roughness testing Ra/Rz Ferrit measurement Fe Wall thickness measurement Video endoscopy Pressure-loss test (liquid) With KASAG, you remain on the safe side.
Request for a quoteKIGEMA SP. Z.O.O
Poland
We maintain quality assurance systems, such as iso 9001: 2009, iso 18001-2004 and iso 14001-2005. KIGEMA possesses a laboratory allowing testing the mechanical properties of products like hardness, elongation, and micrometer. KIGEMA also conducts penetration and ultrasonic tests and issues certificates of conformity with EN 10204-2.2, 2.3, 3.1B. Additionally, the company has an air-conditioned measuring room equipped with High-quality measuring equipment, which is regularly calibrated. The measuring equipment includes: calipers, altimeter, depth calipers, inside micrometers, bore gauges, outside micrometer and roughness tester.
Request for a quoteDÜRR NDT GMBH & CO. KG
Germany
DRIVE NDT is a cloud-based management software which integrates all NDT inspection methods and associated processes into a single system. With DRIVE NDT you can organize and control the complete NDT job workflow including individual test reports, staff, customer and device management, and much more. One solution for all NDT inspection methods Radiographic Testing (RT-D, RT-F, CT) Ultrasonic Testing (UT-PA, UT-TOFD, UT-WD) Visual Testing (VT) Electromagnetic Testing (ET) Magnetic Particle Testing (MT) Liquid Penetrant Testing (PT) Acoustic Emission Testing (AT) Acoustic Resonance Testing (ART) Infrared/Thermal Testing (IR/TT) Leak Testing (LT) Optical Methods (OM) ...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ALUMINIUM GIETERIJ OLDENZAAL B.V.
Netherlands
Our modern inspection and testing equipment allows us to inspect the cast products completely according to your requirements before we deliver them to you. We offer: Inspection of materials (both chemically and mechanically) Delivery under certificate Measurements reports Wall thickness measurement Radiography Penetrant inspection Pressure and leakage tests Endoscopic Ultrasonic Microscopic Hardness measurement 3D scan & 3D-cad comparison
Request for a quoteAKROMAK METAL DIŞ TIC. LTD. ŞTI.
Turkey
Destructive and non-destructive tests can be carried out on request in accordance with the applicable standards. Destructive tests to determine mechanical properties : tensile test impact test Non-destructive tests to examine the internal and surface condition of the castings: visual inspection (VT) Magnetic particle testing (MT) Ultrasonic testing (UT) Penetrant Testing (PT) Radiographic testing (RT)
Request for a quoteMD CONSTRUCTIONS & CRAFTS
Serbia
Iron Construction Thermal INnsulation WaterProofing Deking Assembly Disassembly stairs Swimming Pool Equipment IRON CONSTRUCTION The core of the pool itself is constructed of steel profiles of different dimensions. The bottom of the pool is lined with HVL 4mm thick while the sides are HVL 3mm thick. The entire construction is professionally welded with sealing welds, tested with penetrants and painted in color as desired. THERMAL INSULATION The sides of the pool are lined with 50mm sandwich panels. The bottom of the pool is lined with 50 mm striroporom which is covered with plasticized ribbed sheet metal in the color of the panel. There is a possibility to order colors and designs as desired. DEKING For decking on the coastal part and around the entire swimming part of the pool, we used "Siberian Larch" wood, which is used all over the world to line the pool due to its properties next to water surfaces. Wood is varnished to receive gloss.
Request for a quoteCRONOS DIS TICARET LTD.STI
Turkey
– Iron (pig, ductile iron), aluminum, steel and special alloy casting parts – Sand, gravity, centrifugal, continuous, metal injection and precision casting parts – Casting, machining, coating processes – All quality control tests (tensile, rupture, penetrant, tightness, CMM etc.) – Quality control reporting at all levels Our casting suppliers are companies that mostly work with abroad, have the necessary technical infrastructure, and are fast and solution oriented. We work with experienced suppliers who have the necessary laboratory facilities and quality documents.
Request for a quoteZIGRIN SECURITY
Poland
We test the security of your network to check its resilience against unauthorised access attempts. In the first stage, we use scanning and attempt to bypass security using specialised tools. To that end, we use exploits that use various software vulnerabilities and configuration errors. Thanks to these, we can identify vulnerabilities and issues in your network that can potentially be used by criminals.
Request for a quoteZIGRIN SECURITY
Poland
Our mobile application security tests check whether users of your mobile application or outsiders can cause harm to the company or other users. There are a number of things we focus on, including data storage and authentication procedures, which are often used by criminals for identity theft and hacking. We find vulnerabilities in mobile application security and provide recommendations on patching them out.
Request for a quoteZIGRIN SECURITY
Poland
We test your web applications to detect issues that could lead unauthorised third parties to take control of them. Our methodology allows us to identify vulnerabilities from OWASP TOP 10 list – the Top Ten Web Application Security Risks. With that, you can make sure that your applications meet international security standards.
Request for a quoteResults for
Penetration test - Import exportNumber of results
13 ProductsCategory