Parts washing machines - Import export

Dolfin RTS series Rotational basket washing machines, washing small and complex surfaces It is a compact parts washing machine used for precise and high-level cleaning of problematic part types. The parts that are placed in the washing basket one by one by positioning and / or in bulk are first sprayed with alkaline chemical washing liquid at high pressure to every point of the parts in the device. Then the washing cell is filled with this liquid and the parts are contacted with ultrasonic sound waves. Therefore, thin section detail points, internal holes and channels are cleaned at a high level. In the process, the basket is rotated on the vertical axis and both spraying and ultrasonic effect is penetrated to every point of the part. At the end of this process, the washing liquid is directed to its own tank, while the same process is applied for rinsing and/or liquids in the other tank.

Dolfin KNV series conveyor belt washing machines are parts washing machines used for washing parts produced in series in large quantities. The parts placed at the entry point are moved towards the exit point of the device by means of the conveyor. The parts guided on the conveyor line are washed with high pressure, pre-washing, washing, rinsing, spraying with passivation liquids. At the end of the cleaning process, these parts are dried with pressurised hot air and discharged at the exit point. If desired, it can be integrated into production processes and robotic loading and unloading options are also available. While the entire device is fully automatic, all washing details are parametric. Cleaning is provided at any desired level by means of spray nozzles specially designed according to the part geometry.

"DOLFİN- VDL series Drum (Spiral) parts washing machines are used especially for cleaning small parts with high production quantities and produced in bulk. The materials poured from the inlet part of the spiralised drum in the device are directed towards the outlet part of the drum by the spirals inside the drum. While the drum moves on its own axis according to the set rotation speed, the parts are subjected to washing (degreasing), rinsing, passivation and drying processes respectively (depending on the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively in a single device. Full penetration is achieved by pressurised spraying and immersion effects in each section. It is a very functional model used especially for washing bolts, nuts, washers, or small parts of this type, and fittings, nipples, couplings and fittings processed in high quantities on cnc and automat machines.

"DOLFİN- LYM2 series parts washing machines are industrial purpose parts cleaning devices used especially in repair and maintenance services before and after overhaul. While the parts placed in the device are rotated on its own axis by means of the washing basket, pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the parts are cleaned. Since Dolfin parts washing machines work in a closed cycle, new water and new detergent are not used each time. When washing repeatedly with the same tank, all pollution remains in the washing cell. Thanks to this feature, it protects both nature and labour. Thanks to its high efficiency and performance, it saves energy, water and labour. It works automatically in accordance with the temperature and time values set during use.

DOLFİN- LYM1 series parts washing machines are industrial purpose parts cleaning devices used especially in repair and maintenance services before and after overhaul. While the parts placed in the device are rotated on its own axis by means of the washing basket, pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the parts are cleaned. Since Dolfin parts washing machines work in a closed cycle, new water and new detergent are not used each time. When washing repeatedly with the same tank, all pollution remains in the washing cell. Thanks to this feature, it protects both nature and labour. Thanks to its high efficiency and performance, it saves energy, water and labour. It works automatically in line with the temperature and time values set during use.

AREAS OF USE - Automotive industry - Aircraft industry - Ship industry - Defense industry - Metal industry PRINCIPLE OF OPERATION The parts to be washed on the basket placed on a stainless rotary platform with a sliding system are subjected to rotary basket washing with water with high pressure detergent in a closed cabin to be placed. Washing process is carried out to clean oil, sawdust, dirt and waste from dirty surfaces from different angles by means of time-adjustable pressure water nozzles according to the part structure and pollution rate. By filtering the water with the cycle permanent system, it is designed to reduce the consumption of water, detergent, electricity and time (labor) with the least consumption of parts. OPTIONAL FEATURES - Steam Evacuation Unit - Stainless chrome body structure - Basket structure - Number of nozzles - Liquid level control system All kinds of parts washing machines can be manufactured in our company upon request.

We can say that we are currently living in an era where we are witnessing the 3rd Industrial Revolution. 3D printers will take us out of the mass production line of the Henry Ford era and into personalized and professional production. For example, is a part of your washing machine broken? Since those machines come from thousands of mass productions, this situation is very likely and they will most likely be loaded onto huge ships for repair, and they will be repaired, which will cost you a lot and cause you to wait for a long time.

The part washing machine is designed to easily clean dirty parts with a small size and complex structure in the shortest time possible. Thanks to its brush, the person performing the washing process can carry out any kind of cleaning in the dirty part in detail. It is an ideal parts washing machine for using in small areas.

The parts to be washed are placed on stainless steel rotative basket and are washed with water mixted with degreaser under high pressure. Washing is done in order to clean oil, sawdust, dirt and wastes on dirty surfaces from different angles by means of time-adjusted pressurized water nozzles according to the part structure and pollution rate. By filtering the water with the recirculation system, the machine is designed to wash parts with minimum consumption of water, detergent, electricity and time.

Our roller part washing machine is suitable for the use of solvents and similar chemicals and is manufactured using a tex certified expuruf products. While removing the dirt with pressurized liquid spray, it provides a cleaner and faster cleaning by means of brushes.

At Auromak Makine, with the knowledge and experience we have acquired since 2010, we continue to manufacture industrial cleaning machines and industrial parts washing machines that are aesthetic, high-quality, and practical for both retail and wholesale needs. We take pride in bringing innovation to the industry and adding value to our customers.

The multiprocess parts washing machine with rotating basket is a cleaning device for industrial use.This machine has been designed to ensure that parts are washed effectively and quickly. The main feature of the machine is the rotating basket system.The pieces are placed in a specially designed basket and the basket is washed by rotating it on a rotating mechanism. In this way, each surface of the parts is cleaned equally and a more effective washing process is performed. The Multiproces feature allows different cleaning stages to be performed on the same machine.For example,you can perform different operations such as detergent, spraying, brushing and rinsing on a single machine. Multiprocess parts washing machine with rotating basket is ideal for cleaning parts used in automotive, machinery, electronic equipment and similar industries. It optimizes the production process and increases quality by providing fast, effective and reliable cleaning.

The machine is designed for cleaning and degreasing of cylindrical and heavy parts with total length up to 4500 mm and diameter up to 150 mm. Each part is placed on a trolley and loaded inside the chamber of the machine. The cleaning process is carried out by seven nozzle collectors – six rotating and one moving up/down. The machine provides a combination of fully automated and manual cleaning. The dosing of the detergent is manual. The washer is equipped with a filter that catches particles with dimensions larger than 250 μm. There is mounted a fan for exhausting of the vapour and lighting inside the washing chamber. The machine body is made entirely out of stainless steel, material EN 1.4301 / AISI 304. The equipment complies with the high CE- Requirements and EU – and USDA regulations.

The machine is designed for cleaning, degreasing, chemical treatment of the outer layer and blowing of small components. The parts are arranged in trays with dimensions 600x400x70-150 mm. Two washing zones – pre-washing zone and zone for main washing. After each washing zone there is zone for blowing. The pre-washing zone has an external band filter, which is with the possibility of processing a high volume of washing solution and captures particles of a size greater than 350 μm. The band filter cleaning the washing solution of oil and hard dirt. The mainly washing zone has a column bag filter, which captures particles of a size greater than 50 μm. Both filters have monitoring systems for the degree of soiling and in case of clogging the machine stops. Automatic dosing of the cleaning agent. Machine corpus made entirely out of stainless steel, material No. 1.4301. The machine complies with the high CE-Requirements and EU- and USDA regulations.

Trains, trams and buses cover many and great distances every day. This leaves traces and causes a lot of damage and enormous contamination to the parts. Cleaning and removing grease, oil, brake dust, carbon and other hard deposits is therefore a must to keep trains, trams, buses and other rolling stock running smoothly every day. The Laborex Heavy-Duty Parts Washer configurations are suitable for all rail and transport parts. The Laborex Rail and Transport parts washing machines and cleaning systems guarantee that your parts are 100% clean, dry and protected against rust when they leave the machine. Cleaning solutions for train and transport parts with complex geometries Different shapes and sizes of train and transport parts and their complex geometries sometimes make cleaning difficult. For example, heavy grease deposits or hard-to-reach interior spaces must be cleaned. Another challenge is cleaning heavy weights up to several tons.

Spray washing: automatic cleaning For companies, manual cleaning of parts is a time-consuming activity. The Laborex spray washing machines ensure the automatic cleaning, rinsing, degreasing and drying of industrial parts made of metal or plastic. This way you can carry out other work without any worries while your parts are automatically cleaned. Test our rotating spray washing machines yourself We would like to invite you to come and test our rotating spray washing machines in our showroom. This is completely free and without obligation. Make your appointment now. Ideal solution for external cleaning of parts The Laborex rotating spray washing machines are the ideal solution for the external cleaning of parts. The spray washing principle is simple: you place the parts to be cleaned in the basket and select a washing program.

Features Full cone spray pattern with a round impact area and uniform distribution. Unique design to produce fine atomization by liquid impinging inside chamber without a whirler. No-whirler design with large free passage diameter minimizes clogging. Spraying axis 90ﾟ from the axis of the nozzle inlet. For spraying chemicals such as hydrochloric acid, PPS-injection molded AJP are available for excellent chemical and heat resistance. Applications Cleaning: Pre-painting treatment, washing booths, machine parts, gas, incinerator fumes Cooling: Steel plates, copper pieces, gas Spraying: Aeration, foam breaking Others: Applications where re-circulated water is being used or clogging is a concern

DOLFİN- VDL series Drum (Spiral) parts washing machines are used especially for cleaning small parts with high production quantities and produced in bulk. The materials poured from the inlet part of the spiralised drum in the device are directed towards the outlet part of the drum by the spirals inside the drum. While the drum moves on its own axis according to the set rotation speed, the parts are subjected to washing (degreasing), rinsing, passivation and drying processes respectively (depending on the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively in a single device. Full penetration is achieved by pressurised spraying and immersion effects in each section. It is a very functional model used especially for washing bolts, nuts, washers, or small parts of this type, and fittings, nipples, couplings and fittings processed in high quantities on cnc and automat machines.

DOLFİN- KBN2 series parts washing machines are especially used for washing parts that require rinsing, passivation or other processes after washing, as well as large and heavy parts. While it is desired that there is no oil and other impurities on the surface before assembly or packaging in enterprises and factories that produce parts in series, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part depending on the place of use of the part. For this requirement, a 2nd stage rinsing or a similar application is mandatory. Our KBN 2 series part washing devices are a special device containing more than 1 tank and/or bath. The parts placed in the device are rotated on its own axis by means of the washing basket, while pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the part is cleaned.

Wholesale washing machines

D7 is a tunnel car washing machine with 7 washing brushes, which is the economic version of D9. This tunnel type of equipment can wash cars quickly and continuously, and it can wash 50-60 cars per hour. Its production greatly meets the needs of customers with large business sites and a large amount of car washing. Now many customers with a daily car washing volume of more than 500 cars are using this equipment. This tunnel type of equipment is sturdy and durable. Its appearance takes into account the likes of domestic and foreign customers. It covers a relatively small area, has strong adaptability to the site, and has excellent performance. It is favored by some customers who are limited by the site and want to install tunnel machines.

* Adopts fully automatic PLC computer control system, which has faster operation speed, lower failure rate, and can be upgraded remotely. * Adopts thickened hot dipped galvanized steel material, sturdy and durable. * 5 brushes (1 vertical lift top brush + 2 small vertical brushes + 2 large vertical brushes). * Strong water cleaning system and foam pump system. * Multiple functions: water washing-----foam-----brushing-----wax water washing. * With fault identification code, the fault is easy to identify and eliminate.

CNC Machined Parts material: aluminium alloy Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

The machine is designed for quick, easy and effective cleaning of KLT crates and forms in the automotive industry. The device consists of the main washing zone followed by a rinsing zone and one blowing-off unit. The water from the washing and rinsing tanks are continuously filtered via two oil skimmers – one for each tank. Refreshing the water in the main tank with hot rinse water reduces the water and energy consumption. The filling of detergent in the washing tank is automatic via a dosing pump. Both main and rinsing tanks are equipped with filters for capturing the metal particles with size up to 100 μm. The machine is equipped with two 2.2 kW fans for vapour exhausting. The collected vapour from the fans passes through two condensers where it has been liquefied and returned into the main tank. There are four fans x 3 kW for removing residual rinsing water from the crates. The crates transportation speed is adjusted via a frequency controller.

This machine allows to wash, rinse and dry of mass production parts before assembly and packing. Genenarlly parts in the baskets that are moving on the conveyor are fallen into the machine by manual or pneumaticly. The door locked automatically and wash, rinse and dry operations are handled in the drum. Hot air or vacuum dry is appied. Optianally ultrasonic units can be attached to increase the washing quality. Thiss model is employing both spray and soak clening that improves the clenanliness at maximum level.

A washing unit with manual cleaning designated for complex cavities, soot dirt and carbon deposits. It is guaranteed to remove: cooling mixtures, dust, shavings, composites, oils after stamping, rust-preventing grease, polishing compounds, emulsions, oil products, sweat and grease deposits. The unit allows you to clean parts with complex cavities. A washing unit is equipped with a pneumatic drive for connecting a pneumatic brush and an air gun, as well as a flexible hose for supplying water under pressure.

Maximum spin speed: 1400rpm Finish: Light grey 28 programmes including three custom programmes Anti-leakage system and child lock ECO cold and hot water connection – saves up to 70% of electrical consumption and 20% of the programme time Connection: 400V / 3ph / 16A / 50Hz / Max effect: 4.6kW Can be reconfigured to: 230V / 1ph / 13A / 50Hz / Max effect: 2.4kW Available with pump or valve drain system