Manuals - Import export

The Tape Factory stands out in performance and so will the selection of materials. Allowing just the right amount tack to hold the flower sleeve yet be easy to open, its adhesive will not dissolve in water, and the tape stays transparent. With its width of 19 mm, it’s less likely to constrict the stems compared to other binding methods. No need for scissors or knives. It’s easy to remove and can go directly into a vase.The paper tabs create a handle to open the tape closure easily. Both provide a timesaving, user-friendly solution which maintains the quality of the flower without pinching the stems.

Lindemann Manual Gear Box Treatment has been specially developed to smooth the shifting of a gearbox, differential and / or swingarm while reducing noise. The unique P.T.F.E based formula reduces friction by more than 50%, resulting in more efficient operation and therefore less fuel consumption! In addition, the shifting will feel smoother.

Restores, softens and protects your very dry and irritated hands faster. Restorative and antibacterial components. Without perfume. The creamy and nourishing texture can easily be smoothed out. The transparent cream absorbs quickly and forms an insulating barrier over the skin. Thanks to this "second-skin effect" your hands are protected.

A heavy-duty machine that creates perfect welding preparations with great precision. The Beaver S is available for pipes with an outside diameter of up to 56 inches, with manual and automatic control options.

A heavy-duty machine that creates perfect welding preparations with great precision. The Beaver S is available for pipes with an outside diameter of up to 56 inches, with manual and automatic control options.

A heavy-duty machine that creates perfect welding preparations with great precision. The Beaver S is available for pipes with an outside diameter of up to 56 inches, with manual and automatic control options.

We have established ourselves as a renowned manufacturer, supplier and exporter of quality assured Manual Hydraulic Hand Pallet Truck. These trucks are manufactured using high-grade raw material and advanced machines to remain in tandem with set industry standards and norms. The offered trucks are known for their smooth performance, durability and accurate dimensions.

The Wattsan 0503 CO2 laser cutting machine is an advanced medium format model for laser cutting and engraving non-metal materials. Laser cutting machine designed for serial laser cutting and engraving, it can easily handle wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, fabric,s and fur. Through table: enables the laser cnc machine to work with materials of unlimited length. The design of the equipment allows you to remove the front wall and use the freed space for through cutting. Work area - 500x300 mm with a manual lifting table, which is necessary for processing bulky products up to 20cm (7.87 in) thick, makes it possible to install a rotary device. And then the CO2 laser machine is used for engraving on cylindrical surfaces. It will be convenient for you to work with different heights of the material. Work area====500 x 300 mm Tube power====60W Max engraving speed====700 mm /s Dimensions====650 mm * 1040 mm * 575 mm Net Weight====104kg

MRT MANUAL RETURN BOLT TENSIONER Our economy range of bolt tensioners offer low-cost tensioning solutions. Incorporating our unique quick-release bridge adaptation, a range of adapter kits provide maximum flexibility. Piston stroke limit indication Piston/cylinder misalignment compensation Bolt coverage from 1" to 3-1/2" with just 6 tools Designed to fit BS1560/ANSI B16.5/API flanges Unique quick-release bridge adaptation Application specific tooling available. Contact factory for details. Piston stroke: 15mm (excluding MRT1 - 10mm) Max tool pressure: 21,750 psi (1,500 bar) Bolt protrusion above nut: 1 x bolt diameter ‘D’ includes an allowance for tool removal after bolt tightening with 15mm tool stroke Weight excludes puller sleeve To make a complete MRT Tensioner, choose an Adapter Kit and a Load Cell. Semi-compatible with SRT tensioners. Only compatible with SRT Bridges; NOT puller sleeves. SRT Puller Sleeves cannot be used with MRT Load Cell.

Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. Most parts are made from steel and have been either painted or zinc plated. The Gebuwin range of hand driven spur gear winches are known for their robust construction. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. The TL1000 and TL1500 have a closed spur gear casing. The winches have a static safety factor of minimum 4. GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 SS = stainless steel 14301

Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. Most parts are made from steel and have been either painted or zinc plated.

A design of the present robust worm gear winches of 3 capacities which are constructed with a fully covered gearing (IP 54). The cable drum, the crank and all outgoing shafts are made of high quality 316 stainless steel. All fasteners are of A4 quality stainless steel. The surface treatment of the steel housing complies with the stringent paint specifications C5M according to DIN/ISO 12944. These winches can be utilized with: sea water and chemical installations. Available optional extra’s: grooved drum multi-cabled drum suitable adjustment for air motor drive AM5000

This modern design foldable davit with 500 kg hoisting capacity rotates at a full 360 degrees. Whilst in folded mode, the davit can be inserted into a floor socket and in less than a minute then clicked out and be ready for use. Due to its light weight of 25kg, this davit can be used in numerous applications, including multi-usage positions. Maintenance has been greatly reduced due to its robust design and with an integrated winch and cable. The crank is of adjustable length, the paint specifications meets the DIN/ISO 12944 C1M. A zinc plated floor socket can be purchased as a separate order. Available optional extra’s: electro zinc plated finish (6-8 micron) specific length on request

he Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two speeds.

The XL-Sealer is suited for bundling/ closing/ taping diverse products, like bouquets of flowers. Designed to tape fast and without effort. Choose a hand operated system if manual bundling is desirable or needed; the XL-Sealer is your perfect fit. The XL-Sealer is available in 3 sizes: 1, 1½ and 2 inches. These Sealers are made of Stainless Steel to guarantee a stable and long-lasting bundling solution for bouquets up to 50 mm diameter. FreshSeal is the ideal solution. Where some materials pinch the stems, our tape is developed to not damage the flowers. The closure can easily be opened by hand, meaning your customers don’t need to use a knife, scissors or force. Less chance of harming the flowers. Working with the XL-Sealer is simple and foolproof. Operation is effortless, which makes it faster than taping by hand. Smooth processing, while reducing strain to the wrists, hands and fingers.