Components - Import export

IKO Super Precision Positioning Table TX is a positioning table with extremely high accuracy which is created based on the high precision, high rigidity and well proven IKOPrecision Positioning Table LH by using cylindrical rollers for rolling elements and incorporating IKOLinear Roller Way Super X, which has bestinclass running performance as a linear motion rolling guide, with fullyclosed loop control. Optimal for highly accurate positioning where the existing rolling guides could not be used.

IKO Precision Positioning Table L is a lightweight, long stroke positioning table configured with the slide table and bed made from highstrength aluminum alloy. High accuracy and carrying mass are realized by incorporating two sets of IKO Linear Ways in parallel, and using a precision ball screw in the feeding mechanism. Maintenance work such as relubricating with grease can be reduced significantly by CLube. Various table sizes and stroke lengths are available, and dedicated XY brackets are also serialized, enabling systems such as orthogonal robots to be easily configured according to the application. Precision Positioning Table L is ideal as a highprecision positioning mechanism, for assemblers, processing machines, or measuring instruments.

IKO Precision Elevating Table TZ is an elevating table that performs precision positioning in the up and down directions by using the wedge mechanism.The wedge mechanism applied IKO Linear Way has achieved both high accuracy and high rigidity with a compact size.

The IKO Alignment Module AM is a positioning module developed for alignment stages by combining high rigidity Crossed Roller Bearings and Linear Way E with Precision Positioning Table TU. Alignment stages can be configured without adjusting the height of each alignment module, since the height tolerance is managed with high accuracy of ±10 μm.

Alignment Table AT is a rotary positioning mechanism capable of precise angle correction, in which a high rigidity steel table and bed are used and IKO Crossed Roller Bearings are incorporated in the bearings supporting the table. Alignment Table AT uses the ball screw drive to convert linear motion into circular motion in a fixed angle range and positions the table in the rotational direction. An IKO Linear Way L is used for the linear motion rolling guide of the ball screw drive mechanism, combined with a precision ball screw to achieve high precision positioning. Placing Alignment Table AT on the slide table of the IKO Precision Positioning Table enables the configuration of a low height XYθ multiaxis positioning mechanism. This enables the table to be used as an alignment table for precision measuring equipment, inspection equipment and assemblers.

Precision Positioning Table LH is a highreliability, highprecision and highrigidity positioning table made of a cast iron slide table and bed with high rigidity and excellent vibration damping performance, incorporating an IKO Linear Way and using a precision ball screw for the feeding mechanism. By incorporating two Linear Ways in parallel, it achieves stable running accuracy, high positioning accuracy and large carrying mass. It is available in four sizes ranging from 120 mm to superlarge 420 mm in table width, and tables combining these in a twoaxis specification have also been serialized. It is optimum as a highprecision positioning mechanism for usage where the applied load is large and the stroke length relatively long.

IKO Precision Positioning Table TS/CT is a compact positioning table made of a cast iron slide table and bed with high rigidity and vibration damping performance, incorporating an IKO Crossed Roller Way with a solid record in the field of precision linear motion rolling guides, and using a precision ball screw for the feeding mechanism. IKO Precision Positioning Table TS/CT is available in oneaxis and twoaxis specifications and is widely used in precision measuring instruments and precision assemblers that require high precision positioning.

IKO Micro Precision Positioning Table TM is an extremely compact precision positioning table incorporating a precision grinding ball screw with a thread diameter of 2 mm and an IKO Micro Linear Way L with a track rail width of 2 mm, wellestablished in the field of ultrasmall equipment.

IKO Cleanroom Precision Positioning Table TC···E is optimal for use in high cleanliness environments for semiconductor and LCD manufacturing machines. The unique highairtight structure seals the driving part and guiding parts of the slide table, and prevents dust generation around the table. IKO Cleanroom Precision Positioning Table TC···E achieves cleanliness class 3 by enhancing the airtightness inside the table.

IKO Precision Positioning Table TE is a lightweight and compact positioning table using highstrength aluminum alloy for its main components, with a slide table assembled inside a Ushaped bed. A precision ball screw is used for the feeding mechanism, enabling highreliability and highprecision positioning. Lubrication part CLube is built into the linear motion rolling guide and ball screw, achieving long term maintenance free performance and reducing lubrication work. Various specifications such as ball screw lead, motor type and sensor mounting can be configured, enabling the optimum positioning table to be configured according to the application. Ideal for a wide range of applications ranging from equipment that requires high positioning accuracy such as parts machining, assembly, inspection and conveying equipment through general conveying fields.

TU Series is a compact and slim type positioning table, consisting of a Ushaped track rail and a slide table. The slide table assembled inside the Ushaped track rail is an integral part of a linear motion rolling guide mechanism, in which two rows of large diameter steel balls are arranged in four point contact with raceways. Owing to this design, stable high accuracy and high rigidity are obtained in operations even under fluctuating load varying in direction and magnitude and complex load. Also, by adopting a Ushaped track rail, the rigidity of track rail under moment load and torsion is greatly improved. TU Series includes six sizes with a track rail width of 25 mm to 130 mm. For each of them, slide table length can be selected. Also, ball screw types and leads, motor types, and sensor installations, etc. can be selected to obtain an optimum positioning table suitable for each application.

Precision Positioning Table LH is a highreliability, highprecision and highrigidity positioning table made of a cast iron slide table and bed with high rigidity and excellent vibration damping performance, incorporating an IKO Linear Way and using a precision ball screw for the feeding mechanism. By incorporating two Linear Ways in parallel, it achieves stable running accuracy, high positioning accuracy and large carrying mass. It is available in four sizes ranging from 120 mm to superlarge 420 mm in table width, and tables combining these in a twoaxis specification have also been serialized. It is optimum as a highprecision positioning mechanism for usage where the applied load is large and the stroke length relatively long.

Precision alignment and process technology for the assembly of small products down to micrometer accuracy. CTO technology for assembling small products in a clean room environment - where precision is the key. Modular workstations can be used as standalone operating platforms, integrated into semi-automated platforms, or scaled up for fully automated production lines producing up to 10m products/year.

Precision alignment and process technology for the assembly of small products down to micrometer accuracy. CTO technology for assembling small products in a clean room environment - where precision is the key. Modular workstations can be used as standalone operating platforms, integrated into semi-automated platforms, or scaled up for fully automated production lines producing up to 10m products/year.

Precision alignment and process technology for the assembly of small products down to micrometer accuracy. CTO technology for assembling small products in a clean room environment - where precision is the key. Modular workstations can be used as standalone operating platforms, integrated into semi-automated platforms, or scaled up for fully automated production lines producing up to 10m products/year.

In our assembly department, we assemble components into semi-finished or complete products. These often involve Mifa components and components supplied by the client or purchased externally. This allows us to assemble the profiles we produce into complete end products. We prefer to deliver a complete component. This is why we also perform other processes in-house, such as assembly, bending, sealing, soldering, welding, and masking. With our knowledge and experience, we know how to apply the right technology for each product. Along with machining and surface treatment (please read our respective whitepapers on our website), the other processes enables us to provide the most optimum product. We have many processes and related knowledge in-house. The customer can leave it all to us, and this also means a reduction of logistics operations, which is beneficial to the quality of the final product while also reducing costs.

Main component replacement is a specific job which need experienced specialist from the wind turbine sector. Search and find the right supplier for you locally.

The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airknife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved. Features Incorporates Simco-Ion anti-static bars which quickly neutralize static, facilitating easy removal of particulate Clean, uniform, high-velocity ionised air provides ‘‘one-step’’ cleaning Direct-drive motors require little or no maintenance Anodised finish for corrosion protection Connection for pressure sensor New design extruded aluminium profile Cost efficient versus compressed air

The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airkife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved. Airpressure sensor Each Typhoon system is supplied with an airpressure sensor wich can measure the air pressure inside the airknife. If the pressure drops under the required level, the system does not work optimal. A system check is then neccessary, often it appears that the air filter needs to be cleaned. Power unit A2A7M Typhoon systems with EP-Sh-N anti-static bars incorporate a power unit type A2A7M.

The tube diameter is adjusted to the existing tube system. And so is the number of integrated anti-static bars, based on the diameter. Simco-Ion anti-static bars can also be integrated in a tube provided by the client. The anti-static bars are arranged in two series. They are connected to a two-phase power unit to ensure optimal ionisation at high velocities. Features - Custom size pipe - Optimal ionisation at high velocities - Can be integrated in a tube provided by the client

Simco-Ion’s patented IML charging technique is even more versatile with the IML Easycore 2 component resin for construction of IML cores. Even very complex and small cores can be constructed with the 2 component resin. The resin is specially developed by Simco-Ion to have the perfect electrical and mechanical properties for use as an IML core. All mechanical operations s.a. drilling, grinding, milling etc are possible to make the core to the perfect shape and size. The IML Easycore comes in duo-packs consisting of the resin and the correct amount of hardener. Package sizes of 250 g are available. Features - 2 component resin for construction of IML cores - Even very complex and small cores can be constructed - Comes in duo-packs consisting of the resin and the correct amount of hardener - Available in 250 and 500 g

The IML Spider is a versatile electrode for direct charging for IML applications. It consists of a IML Spiderblock with built-in resistors to prevent accidental sparking. The IML Spider Block has 8 output ports, withresistors per port, for connection of up to 8 flexible charging electrodes. An additional output port isprovided for daisy chaining complementary IML Spider Blocks. All connection ports are equipped with quick connect plugs. Electrodes are available in lengths of 300 and 500 mm and a special 500 mm long one that can be tailored during installation by use of a special tool. Interconnection cables are available in lengths of 0,5 , 1 , 2 and 3 metres. Connection cable for use with the CM type generator are standard 2 , 5 and 10 metres long. The IML Spider can be used for IML applications in conjunction with IML generators with a maximum output of 18 kV.

The CMME is a small profile footprint charging generator specially designed for IML applications. The unit has fully integrated high voltage parts and only needs a 24V DC supply. The housing is compact, robust and only weighs 480 grams which makes it perfect for end of arm mounting in IML pick and placehandling systems. It can easily withstand the high G-forces occurring during the IML process. The CMME has a unique (patented) cyle OK feature. A signal will become active when the label(s) have accumulated enough electrostatic charge indicating that the charging is finished. This signal can be used by the machine interface to decide to stop charging. A second stage in the cycle OK signal will indicate that the charge on the mandrell has dropped below asafe level to start moving the mandrell out of the mould.This innovative feature completely eliminates the guess work and experimental setup for each individualIML application, and when changing product or label.

Extension IQ Easy: an extension to the IQ Easy Platform The IQ Easy platform with at least one Manager IQ Easy can be extended with the Extension IQ Easy to control an additional 6 devices. The Extension IQ Easy comprises of a Control unit without a display. Status LED's show the power on and overall warning or alarm status. Up to 6 IQ devices can be connected to the Extension IQ Easy. The 24V DC power distribution is routed via the Extension. So no extra cables!This makes the connection of a device even easier than connection to a single desktop power supply. The Extension IQ Easy is available in 2 versions: 1) Input voltage 100 - 240V /50-60 Hz This unit converts the input voltage to 24V DC and provides power to all 6 devices connected. 2) Input voltage 24V DC This model needs a 24V power input provided by the user. Further extension of devices is possible by using multiple Extension IQ Easy's. Each Extension adds another 6 devices to the system with a maximum of 30 devices.

Manager IQ Easy: the heart of the IQ Easy Platform Manager IQ Easy Introducing a new level of static control; the heart of the new IQ Easy platform is the Manager IQ Easy. It comprises of a Control unit with a 7'' LCD touch screen, provides information from all the connected devices and makes it easy to change and monitor status and parameters. Up to 6 IQ devices can be directly connected to the Manager IQ Easy. The 24V DC power distribution is routed via the Manager, so no extra cables! This makes the connection of a device even easier than connection to a single desktop power supply. The Manager IQ is available in 2 versions: 1) Input voltage 100 - 240V /50-60 Hz This unit converts the input voltage to 24V DC and provides power to all 6 ­connected devices. 2) Input voltage 24V DC This model needs a 24V power input provided by the user. Further extension of devices is possible using the Extension IQ Easy. This adds ­another 6 devices to the system with a maximum of 30.

Sensor IQ Easy: that measures the electrostatic charge A sensor that measures the electrostatic charge of a web can be added to the IQ Easy platform. The Sensor IQ Easy is a bar type device that can hold op to 16 sensor heads. Each sensor head can be placed on a strategical position across the web to monitor the electrostatic charge. All data of each sensor head is communicated to the Manager IQ Easy and stored for process monitoring. For dirty environments or for precautionary protection of the sensor heads, the Sensor IQ Easy bar is equipped with a compressed air connection. Using only a very low pressure and air volume dirt entering the orifice of the sensors is prevented. Anti static bars or charging generators in the system can act on data received from a sensor. This makes it possible to control the static charge level on the web in real time using a closed loop feed back and correction routine.

Test Method Hold the TensION at a distance from the ionising points / emitters. If a high voltage is present, a red indicator in the plastic tip will illuminate. To get an indication of proper functioning of the Simco-Ion equipment all the emitters should be checked. Minimum distance from the TensION to the ionising emitters or charging points must be obtained. Refer to the table below: Test Method Hold the TensION at a distance from the ionising points / emitters. If a high voltage is present, a red indicator in the plastic tip will illuminate. To get an indication of proper functioning of the Simco-Ion equipment all the emitters should be checked. Minimum distance from the TensION to the ionising emitters or charging points must be obtained. Refer to the table below: Features - Convenient high-voltage indicator in pen size - There is no need to make contact with the device being controlled - The tip of the TensION illuminates when a voltage is detected

The FMX-004 is a convenient, compact and pocketsized electrostatic fieldmeter. With this fieldmeter you can measure and store the field strength and polarity. It enables you to carry out measurements in awkward places. The correct measuring distance is displayed by two integrated LEDs. The electrically conductive plastic housing with an earth connection fitted at the side ensures accurate measurements. The unique bicolour display shows the measured value both numerical and graphically. The status of the battery is shown on the display. features - Accurate measurements - Electricity conductive plastic housing with an earth connection - Possible to carry out measurements in awkward places - Indicator for battery status - Pocket-sized

This type of anti-static bar, a more powerful version of the EP-Sh-N is highly effective and, with its long range, ideal for neutralization of static electricity on materials when the distance varies. Under certain conditions the maximum distance may even be as large as 600 mm. The construction of the bar is so rigid that bending of long bars is only minimal. Features - Long working distance: 600 mm max. - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. - Ideal for neutralisation of static electricity on materials when the distance varies.