Membranes - Import export

PU MEMBRANE 450 is a one component, easy to apply, specially formulated polyurethane based, elastic, crack bridging membrane. It cures to form a highly elastic, seamless, waterproof coating with excellent crack bridging properties. Its performance is maintained even at low temperatures.

Waterproof enclosures with protection grades IP67 or IP68 for outdoor use are not automatically sealed against vapour and humid air. To avoid negative pressure, high humidity and condensation inside the enclosure a continuous Ventilation and pressure equilibrium is necessary. This function can be achieved by using a venting element made by Jacob. Features: - Continuous ventilation and adaptaion on the inner pressure - Hydrophobic and oleophobic PES- membrane - Body from stainless steel 1.4305 - Theoretical air flow through usable surface up to 75 l/h at Delta-p = 0,07 bar - Water entry pressure >= 0,83 bar (dynamic WEP, 30 seconds) - Temperature range -40°C / +100°C - Protection grade IP66 / IP68 - 0,6 bar (60 min.) / IP69

Waterproof enclosures with protection grades IP67 or IP68 for outdoor use are not automatically sealed against vapour and humid air. To avoid negative pressure, high humidity and condensation inside the enclosure a continuous Ventilation and pressure equilibrium is necessary. This function can be achieved by using a venting element made by Jacob. Features: - Continuous ventilation and adaptaion on the inner pressure - Hydrophobic and oleophobic PES- membrane - Polyamide material fulfills UL 94 V-0 and EN 45545-2, R22: HL3 / R23: HL3 - Theoretical air flow through usable surface up to 170 l/h at Delta-p = 0,07 bar - Water entry pressure >= 0,83 bar (dynamic WEP, 30 seconds) - Temperature range -40°C / +100°C - Protection grade IP66 / IP68 - 0,6 bar (60 min.) / IP69

"Customized system engineering from pre-testing to full implementation. Starting with economic calculations and lab testing we will conceptualize and build your individual system for waste water- and drinking water treatment. Our team will install your system on site, monitor the commissioning and can also manage maintenance. "

Spraytec forms a seemless, highly elastic waterproof coating. It is best suited for application onto large surface areas, where it can be applied rapidly. Made from bitumen emulsion it is water based, rapid curing and can be applied on uneven surfaces with minimal surface preparation. Spraytec is UV and puncture resistant, self-healing and environmentally friendly. It is suitable for application onto roofs, walls, floors and in underground construction.

Projektinfo: Busstation Theodor Heuss-Brücke VALMEX FR 900 Membrane 1150 m² Architekten: Zaeske & Partner, Wiesbaden Bauausführung: 2011 Terminal wird täglich von ca. 4000 Personen frequentiert

Body, flange, screw and shaft: stainless steel Couplings: stainless steel (nylon as an option with code -A) Membrane and valves: made of a hydrocarbon-resistant elastomer (Neoprene as an option with code -A) Lever: zinc-plated steel with a rubber handle, 1 metre in length

We realize customer-specific membrane switch and advise you comprehensively on equipment requirements and technical features. On the basis of your sample, your specification or technical drawing, we will create an individual offer and support you during the project. We advise you on the selection of suitable materials and offer cost reduction options. We offer you an active co-operation in the development and construction and give suggestions for improvement. For an offer we need: •technical drawing, sketch or pattern •technical specifications, equipment extras •required amount Please send following informations to: info@nh-technology.de One of our engineering experts will contact you asap.

FLL-certified roof protection layer made of soft PVC for installation on non root-proof roofs, for forming a watertight and root-proof basin on green roofs with water accumulation and as water-proof and root-proof lining in planters.

Available in the full pore size range, white and translucent membrane filters having wide and varied applications including air monitoring, water analysis, capture of micro-organism and blood filtration; also available in hydrophilic (PVP treated) or hydrophobic (PVP free) version. • Fully manufactured in-house from high quality polymer material (film). • Manufactured (ISO5) and converted (ISO7) in clean room environment. • Convenient and precise labelling with lot number ensuring full product traceability. • Consistent pore size for accurate separation of samples by size. • Flat and smooth surface for an easy sample analysis. • Low extractable, low protein binding, negligible adsorption and absorption. • Biocompatibility, excellent chemical resistance and thermal stability. • Supplied with a Certificate of Quality. • ISO 9001 certification.

FATRAFOL® based on PVC and TPO (thermoplastic polyolefins) are offered as complex insulation solutions for flat and slightly sloped roofs, ground insulations, green roofs, insulations for balconies, lagoons, and water bodies. Customers are provided with technical support in the form of training, consulting, and advisory services linked with the use of our products.

Type of Tape : Net and One-Sided Adhesive Tapes Type of Adhesive : Modified Acrylic Type of Liner : 120gr Kraft Silicone Paper Type of Carrier : Polyethylene Film Thickness (mm) : 0.29 Adhesive Strength (N/25mm) : 35 Temperature (ºC) : -30 / +80 Width (mm) : 25 ↔ 1500 Colors : Black Mesh : Rectangular Features : Designed to bond breathable membranes. Great resistance to UV rays and outdoors. High strength adhesive (High tack). With the purpose of waterproof against water, wind and steam in roofs and walls. Applications : Applications requiring high thickness. Bonding of wood panels and joints outside the building. Designed for construction of wooden houses Passive house. Lamination of porous surfaces that require a high grammage.

Body, flange, screw and shaft: stainless steel Couplings: stainless steel (nylon as an option with code -A) Membrane and valves: made of a hydrocarbon-resistant elastomer (perbunan) (Neoprene as an option with code -A) Lever: zinc-plated steel with a rubber handle, 1 metre in length Trolley-mounted pump with the CHAR version

Ultrafiltration of milk retains the fat globules and the proteins. The inorganic salts and the lactose, along with some of the water, are partially removed as permeate. The resulting retentate is a partially concentrated milk with reduced lactose and mineral content.

In this type of production, we can also perform electroluminescent lighting application and LED lighting application. In this type of production, ITO Film is used and production can be made by etching method or silver conductive printing method. Since the structure of ITO is permeable to light, our customers generally prefer ITO in illuminated capacitive circuit structures.

The drainage membrane is a high-density polyethylene-based HDPE seal used in underground installations in construction or other areas to isolate moisture from the ground to the indoor environment. They are made in 400 grams and 500 grams.

LIPP® offers a wide range of Roofs and Covers for covering liquid, solid or gaseous media. They can be tailored and adjusted to each application. They include both roofs developed by LIPP® and also solutions designed by our partners. There are also simple foil roofs to choose from for gas storage facilities as well as singleskin, doubleskin or double diaphragm roofs. The LIPP® stainless steel diaphragm roof also offers a particularly highquality solution for the storage of volatile or explosive substances while the versatile LIPP® segment roof completes the range of covers.

We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

Strengthen and enhance membrane performance Customized and developed for specific end-use applications, POREX ® membrane support media are used as substrates for fragile membranes to provide structural strength and enhanced performance. Available in polyethylene (PE) and various customized geometries, our membrane support media: Support fragile membrane s with a strong and durable media. Enhance performance of specific end-use applications with custom designs Materials Offered Advanced porous materials (PE) Formats Available 3D molded shapes One piece solid and welded options including tubes and sheets Customization options for specific applications Request Sample ask an engineer

Pleated Filter Cartridge Type: PPA Pleated PP-Membrane or nonwoven PP support nonwoven Hard cage Core + end caps made of 100 % polypropylene, meet requirements of FDA guidelines. Thermal welding processes seal all components No adhesives or extractable materials Version: DOE SOE 226 – O-Ring / Bayonet / Spear P7 SOE 222 – O-Ring / Flat P3 SOE 222 – O-Ring / Spear P8

Optigrun root protection membranes are used on non-root-resistant roof waterproofing under extensive and intensive roof greenings.

The AF filter presses from AQUACHEM are a further development of conventional chamber filter presses, which have been tried and tested in the industry for over a century. However, due to the degree of automation required and the increase in efficiency necessary nowadays, the technology we have had up until now is often no longer up to date. The design of the AF filter presses is based on the optimum interplay of the ?? individual assemblies of the filter press to ensure reliable, efficient and permanent operation without personnel being present. The automated flexibility of the product enables autonomous adjustment to changing conditions, such as concentration or even specific filter properties. We guarantee these properties and also availability. This is only possible because AQUACHEM and the AF-series possess the knowledge, an intelligent control system and the technology for maximum flexibility. Yes, this is a product with unique selling points – test it out yourself.

Our testing filter presses for hire are available in various sizes. Whether in a container or as a mobile filter press, we're sure to find the right solution for you. Set-up and connection of the systems is easy to perform, and we are of course ready to assist you with commissioning.

The AQUACHEM LCM 320 (pocket press membrane) is ideal for mobile deployment on site on a suitable trolley and can be operated with up to 15 bar loading and 15 bar membrane squeezing. This machine can also be used as a testing filter press in the case in order to decide on the right fabric or to check the filterability of the suspension. Fully equipped, this compact press can manually implement functions that our fully automatic machines can do. The AQUACHEM LC 320 (pocket press chamber) is identical in design to the LCM 320 and differs only in its function as a chamber filter press (without membrane). The LC 470 is the more affordable, low-cost version of the EC-series. Main feature is the restriction of the feeding pressure to 7 bar. All other features are the same as the EC-series. This series is built in a compact design with a feeding pump and discharge manifold.

BORSIG offers attractive process solutions for various gas separation applications in the fields of oil and gas production or refinery and process technology, such as BORSIG Hydrogen separation and BORSIG Fuel gas conditioning. This covers the treatment of gas streams for conditioning raw gas flows, recovery of specific components and the improvement of product quality to comply with customer gas specifications. Process concepts can be developed in addition to existing processes or as an alternative to conventional process solutions.

Filter industrial wastewater with tubular membrane filters For micro and ultrafiltration of industrial wastewater, our POREX® tubular membrane filters (TMF) are designed to fit new and existing tubular membrane systems. During operation, a fluid - such as chemically pre-treated wastewater - flows through the cross-flow membrane tubes at high velocity, sufficient to maintain turbulent flow. Best used for industries including electroplating, microchip manufacturing and zero liquid discharge systems, our tubular membrane filters: Fit new and current tubular membrane installations Are highly durable - Strong membrane-to-tube bond ensures long service life, and tough membrane withstands sharp particles and strong cleaning regimens. Enhance wastewater system performance with backwashable capability Multiple configuration options to meet low to high flow requirements