Results for
QUELLTECH GMBH
Germany
Many materials cannot be measured tactilely, therefore non-contact thickness measurements become necessary. Especially e.g. with glowing materials, or wet processes, a continuous tactile measurement is nearly impossible. Furthermore, web speeds in plant engineering and production have increased, requiring a corresponding fast sampling rate of the measuring systems. In addition, high measuring widths are often required. Why is contact free measurement technology so perfect for this application? Can be used in any web width, Scalable measurement thicknesses from a few millimetres to several meters, Thickness and coating thickness can be measured for different materials, Vibrations of the web materials, can be compensated, Turnkey solution for mechanical engineering, Non-contact and non-destructive measurement method, Large distances to the measured object are possible, Measurement of free forms,
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Proven special release agents for the production of concrete products by wet-cast process using either PE, PU or silicone moulds. Fast and easy release of concrete products from the mould, results in clean, uniform and almost flawless surfaces.
Request for a quoteENVEA
France
One of the sole QAL 1 certified FID analyzers on the market, also available in a transportable version for the measurement of THC or simultaneous THC, nmHC & CH4. Utilizes Flame Ionization Detection (FID), the most sensitive and widely used technology for the measurement of Total hydrocarbons (THC) / Nonmethanic Hydrocarbons (NmHC) / Methane (CH4) • ideal for wet and corrosive process conditions • high accuracy, sensitivity and stability • real time calibration graph • complies with EN 12619 & EN 13526 standards for emissions monitoring • complies with CFR 40 1065 (US EPA) for engine emission testing of hydrocarbons
Request for a quoteWIGTEC FISCHEREDER KG
Germany
In the WTH 200.2, the following materials can be reliably brazed with active materials in a high vacuum. PCD (polycrystalline diamond) MKD (monocrystalline diamond) CVD diamond (chemical vapour deposition) PCBN (cubic boron nitride) and Hard metals as well Ceramics In the high-vacuum furnace WTH 200.2, our customers manufacture indexable inserts, dressing wheels, rotating tools and turning tools with blades made of natural diamond or MKD for polish turning. The vacuum brazing is flux-free. In the so-called active brazing process, titanium allows wetting of the surfaces. While cemented hard metals can also be inductively brazed, diamonds, CVD and ceramics must be actively brazed in a vacuum. When brazing PCD and PCBN, not only the hard metal substrate but also the PCD or PCBN layers are wetted.
Request for a quoteKMC GLOBAL EUROPE SP. Z O. O.
Poland
Move hot, dry or wet abrasive metal scrap or finished parts with an oscillating scrap conveyor. Vibrating scrap handling systems are ideal for moving hot, dry or wet abrasive metal chips, die scrap, or finished parts across horizontal distances at roughly 12.5 feet per minute. Low cost, economical choice for small to large size shops. Built for machine-side or in-pit operation. This oscillating scrap conveyor is the top choice for transferring hot, dry or wet abrasive metal scrap, chip processing or moving finished parts across horizontal distances. This scrap handling system provides a steady movement of material at roughly 12 1/2′(3.81 meters) per minute.
Request for a quoteKMC GLOBAL EUROPE SP. Z O. O.
Poland
Metalworking’s most versatile belt conveyors for transporting a broad range of materials. More versatile than other types of conveyors. PRAB steel belt conveyors can be used to handle any type of wet or dry metal scrap- from bushy material and die scrap, to chips and turnings. This heavy-duty scrap conveyor can process wet or dry metal material in any volume and is available in a wide variety of paths
Request for a quoteOCV ITALIA
Italy
M720 chopped strand mat represents a compelling solution for deep draw and complex molding processes with highly filled resin systems. EASY HANDLING AND MOLDABILITY Optimized bonding and chop length mix bring high conformability and easy hand tearing for tailored shapes. PROCESS EFFICIENCY Fast wetting and quick air release maximize molding productivity. Excellent weight uniformity helps laminate consistent thickness. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. M720 mat is designed for hand layup process with polyester, vinyl ester resin systems.
Request for a quoteOCV ITALIA
Italy
QUALITY DESIGNED TO INCREASE PRODUCTIVITY M723A chopped strand mat represents an ideal solution for demanding applications requiring good surface finish and exceptional mechanical properties, in hand layup or closed mold processes. EASY HANDLING AND MOLDABILITY Very good glass bonding provides excellent dry handling characteristics and minimized fiber shedding during molding process. HIGH PROCESS EFFICIENCY Fast wetting and quick air release help reducing the labor required to roll out the part. Exceptional wet tensile strength perfectly fits wet and carrying process. HIGH PERFORMANCE Optimized product design allows good surface finish and smooth surface behind gelcoat while providing the final part with exceptional tensile and flexural performances. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion.
Request for a quoteOCV ITALIA
Italy
M705 chopped strand mat represents a compelling solution to hand lay up high glass content and thin laminates balanced with good mechanical properties. EASY HANDLING & MOLDABILITY Optimized chop length mix provides good confirmability to complex contoured molds. PROCESS EFFICIENCY Fast wetting and quick air release help reduce the labor required to roll out the part. BALANCED PERFORMANCES Moderate impregnation speed reduces resin consumption, resulting in thinner laminate with high glass content, and improved mechanical properties. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. M705 mat is designed for use with unsaturated polyester, vinyl ester resin systems in hand layup applications including automotive parts, boats, chemical tanks and pools.
Request for a quoteCDI VALLÈS S.L.
Spain
Concentrated chlorinated detergent for agricultural and livestock industries PC35 Washing and cleaning products (including products containing solvents) Powerful detergent, cleans and deodorises in one step. Its special foaming formulation facilitates wetting and thus the detergency process. Does not attack steel, stainless steel, enamelled ceramics or plastics, but should be used at low temperatures and short contact times on aluminium surfaces. It contains alkaline degreasers and surfactants, complexing agents and active chlorine, so it is particularly suitable for the removal of organic residues such as grease, proteins and blood adhering to all types of surfaces. Due to these properties, it is recommended for use in foam projection cleaning.
Request for a quoteOCV ITALIA
Italy
PipeStrand® S2300 is made for fabricators that want to reduce material cost, while increasing the performance of their filament wound products. Designed to increase production efficiency, while providing excellent hydrothermal stability under pressurized conditions. OUTSTANDING MECHANICAL PROPERTIES Excellent properties in both amine and anhydride curing systems; improved axial tensile strength, interlaminate shear strength and burst stress for high performance filament wound epoxy applications. REDUCE COST Designed for use in filament winding, in both epoxy amine and anhydride curing systems — giving flexibility with one glass input and higher glass loading. GREAT STRAND WETOUT Excellent processing range, fast wetting and smooth pipe surface. LONG SERVICE LIFE Excellent hydrothermo stability and strength retention under pressurized conditions, leading to long service life for installed pipe.
Request for a quoteOCV ITALIA
Italy
9703 wet use chopped strand (WUCS), featuring Advantex® glass fibers, is designed for improved line speeds and product strength in the manufacturing of wetprocess glass veils. Provides strength and durability for construction, home furnishings and asphalt roofing shingles. EXCELLENT TENSILE STRENGTH Desirable veil and wet web strength for demanding construction and enduse products for home furnishings. EFFICIENT PROCESSING Designed to improve wet web strength in nonwovens processing, allowing improved line speed and reduced veil defects. IMPRESSIVE MECHANICAL PROPERTIES Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. Boronfree Advantex® glass, contributes to decreased emissions, reduces the environmental impact of manufacturing fiberglass, and provides superior performance in corrosive environments compared to standard Eglass.
Request for a quoteBEHRINGER GMBH MASCHINENFABRIK UND EISENGIESSEREI
Germany
The HCS MULTI-FLUID is a series of carbide circular saw manufactured by Eisele. The key highlights of the HCS MULTI-FLUID series include a firm base frame that is welded, a bigger scope of cutting, an arbitrary saw blade that is accessible to ensure maximum cutting scope that can reach up to 180 mm . The machine has a sturdy and robust base frame on which the combined sawing unit and material feed unit are mounted. This structure combined with a very robust machine design ensures a smooth sawing process with excellent cutting results and a long service-life of the saw blade. The Multi-Fluid system is excellent for high-alloy stainless steels and tool steels, nickelbasedalloys like Inconel and Hastelloy as well as titanium alloys. Depending on the requirements, the following cooling/lubrication components can be combined in a most effective way: — Coolant nozzles for wet processing — Micro-spraying device for minimum quantity lubrication — Cooling vortex tube for dry cutting
Request for a quoteOMNITRACK
United Kingdom
Omnifloat castors allow smooth conveying & directional change with minimal damage to delicate surfaces. Specified throughout the glass handling industry for conveying glass through wet, corrosive, dusty & high temperature processes. Omnifloats are typically supplied with a 50% mix of ‘left hand’ & ‘right hand’ swivel trail. We recommend fitting the casters in a regular, alternate pattern to minimise bias & provide a neutral conveying plane. Replacement balls available as spares. Alternative materials can be retro-fitted for extended durability & service.
Request for a quotePERO AG
Germany
In industrial parts cleaning, wet media are used in 70 to 90 % of all cleaning processes. Wet media include aqueous solutions – similar to detergents we use to wash our dishes or laundry – as well as nonaqueous solvents. For each cleaning task, project engineers must choose the best wet medium, taking into account ecological and economic considerations. Workpieces and parts are produced in finetuned production processes that often require the use of special consumables and process chemicals. Parts are generally made from specific materials, and their contamination after machining is determined by the processes they have undergone. When assessing the environmental impact of cleaning media, one sometimes comes to surprising conclusions. First of all, the energy input and use of resources must be assessed.
Request for a quoteOZZY CELIKTURK CO
Turkey
Wet wipes containing special solution processed on 180*140 mm non-woven fabric. 90 pcs in single pack and 24 pcs in single cartoon
Request for a quoteSIEMPELKAMP MASCHINENFABRIK GMBH
Germany
CMC TEXPAN's roller separators are very suitable for processing fresh and recycled wood; they oer high performance when processing wet or semi-wet wood materials. Their principle of operation is based on the rotation of a group of rollers provided with a specic prole or disc pattern; they are adequately spaced apart, whereby such spacing denes the particle size selected. The material is bouncing on the rollers to separate the fractions. Particles of a size smaller than the gap between the rollers pass through the roller spacing. Larger particles are conveyed by the rollers and discharged. The size of the desired fractions can be simply adjusted by changing the gaps between the rollers and/or by using rollers with dierent patterns. "SRD" type - for pre-crushed material "SRU" type - for all typical applications and numbers of fractions "SRO" type - for wet or dry strands
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
3D-MICROMAC AG
Germany
3DMicromac’s microMIRA™ LLO system provides highly uniform, force free lift off of different layers on wafers at high processing speed. The unique line beam system is built on a highly customizable platform that can incorporate different laser sources, wavelengths and beam paths to meet each customer’s unique requirements. The laser system can be used for a variety of applications, such as GaN lift off from glass and sapphire substrates in microLED display manufacturing as well as in semiconductor manufacturing. Additional applications include laser annealing and crystallization for surface modification. Force free and extremely fast line beam laser processing No damage due to thermo-mechanical effects Low production costs Elimination of costly and polluting wet chemical processes Integration of adjacent manufacturing steps for higher fab productivity
Request for a quotePALLMANN MASCHINENFABRIK GMBH & CO. KG
Germany
Surging demand by the pelletizing industry has caused a shortage of available saw dust and shavings. Numerous industries, like wood–based panelboard producers and the power plants are forced to find alternative sources. Substitution of suitable replacements has become urgent to ensure a fibre supply and to prevent shortages. Wood chips are often the only available source. Because of increasing numbers of produc-tion lines for pellets and particleboard a shortage of small fibre, has resulted. The flake produced from wet wood chips by the optimally PHMC hammer mill, can be used as an additional source or a 100% substitute of saw dust. Advantages Processing of wet chips (moisture u > 100%) Flake preparation of chips to a coarse saw dust type material Ensure the fibre supply in existing processing lines High machine availability at lowest maintenance an labour costs Independence from saw dust supply Future-proof for the usage of different material types by simple adjustment of...
Request for a quotePALLMANN MASCHINENFABRIK GMBH & CO. KG
Germany
Surging demand by the pelletizing industry has caused a shortage of available saw dust and shavings. Numerous industries, like wood–based panelboard producers and the power plants are forced to find alternative sources. Substitution of suitable replacements has become urgent to ensure a fibre supply and to prevent shortages. Wood chips are often the only available source. Because of increasing numbers of produc-tion lines for pellets and particleboard a shortage of small fibre, has resulted. The flake produced from wet wood chips by the optimally PHMC hammer mill, can be used as an additional source or a 100% substitute of saw dust. Advantages Processing of wet chips (moisture u > 100%) Flake preparation of chips to a coarse saw dust type material Ensure the fibre supply in existing processing lines High machine availability at lowest maintenance an labour costs Independence from saw dust supply Future-proof for the usage of different material types by simple adjustment of...
Request for a quotePALLMANN MASCHINENFABRIK GMBH & CO. KG
Germany
The knives of knife-ring flakers have to be sharpened and re-set at regular intervals. This can be a very time-consuming and personnel-intensive job. The quality and precision of these tasks depend strongly on the accuracy and dedication of the individual worker. With the sharpening and setting robot PZSE the knives can be sharpened and set automatically. Features, Function Safety housing Fully automatic process flow Transport to and clamping of the knife ring to the carrier disc Determining the wear of all parts Automatic readjustment of all wear shoes and knives Sharpening of all knives in a wet grinding process Cleaning Torque control of clamping bolts Detection of possible damage to the threads Advantages Automatic sharpening and setting process Setting of the knives with high accuracy Electronic control of tightening torque of the knife fixing bolts Automatic monitoring of the thread quality of the fixing bolts Preventative maintenance program thanks to...
Request for a quoteLABOM MESS- UND REGELTECHNIK GMBH
Germany
Pressure transmitter PASCAL CV4 threaded connection, type series CV4100 Features Compact case of stainless steel in hygienic design according to recommendations from EHEDG and 3A, degree of protection IP 65/67 Accuracy ≤ 0.15 % High-resolution graphic display with Intuitive operation and backlight Quick access to device data Comprehensive parameterising, simulation and diagnostic functions Nominal range 0.25 bar to 400 bar Turndown up to 20:1 Output signal 4…20 mA with HART® protocol Output functions: linear, invers Table function with up to 32 support points (in preparation) Wetted parts stainless steel Process connection: screw-in thread with internal diaphragm Options Accuracy ≤ 0.1 % Explosion protection for gases and dust (in preparation) Classification per SIL2 (in preparation) Material certificate per EN 10204 Calibration certificate per EN 102044
Request for a quoteFAMA PROFI CENTRE
Russia
HANDY is an economical, high coverage paint for residential and commercial areas with high to medium traffic and operational load, it is intended for painting concrete, brick, plywood, galvanized steel, fiberboard, chipboard, OSB, drywall, non-woven paintable wallpaper, fiberglass, as well as putty and plastered indoor surfaces. It has an excellent adhesion to galvanized steel when painting ceilings with open engineering systems (ventilation and fire extinguishing system) It has a good resistance to dry and wet abrasion and processing using sanitary disinfectants, low glossiness with prolonged rubbing. There is no residual stickiness and low yellowing. There are good blocking properties when painting fat-soluble condensates and alcohol markers. Absolutely smooth surface when applied by spraying. Environmentally friendly: Does not contain phosphates, solvents and plasticizers, safe for the ecology of living space.
Request for a quoteHAMON
Belgium
ExxonMobil’s Wet Gas Scrubbing (WGS) technology allows refiners to reliably meet tough FCC emission regulations with well-proven technology.In 2002 and 2003, ExxonMobil Research and Engineering Company (EMRE) and Hamon Research-Cottrell (HR-C), entered into licensing and sublicensing agreements to provide ExxonMobil’s Wet Gas Scrubbing technology to sublicensees of HR-C.Expect these advantages:Can avoid costly CO boiler upgrades with allowable scrubber pressure drops as low as zero inches of water, Takes advantage of HRC’s almost 100 years of experience and global leadership position in providing air pollution control equipment to a wide range of industries, including refineries.Maximizes cat cracker availability - scrubber run lengths match longest FCC up-time in the industry, Meets or exceeds toughest particulate and SOx emission regulations, Produces environmentally benign wastewater safe for direct discharge, Collected catalyst suitable for direct low cost disposal
Request for a quoteTHOLANDER ABLUFTTECHNIK GMBH
Germany
Multiventuri scrubbers are suitable for the separation of adhesive aerosols and for fine dust in humid waste air as these filtrating separations lead to adhesion, clogging and thus to irreversibel high filter resistance. In a wet separating process, the particles are washed out and thus cannot adhere. Reliable and automatic operation Automatic elutriation Automatic washing of separated elements Automatic discharge of the Ausschleusung der nicht absetzbaren ölhaltigen Stäube Level switch in pump sump Dry run protection Control of the nozzle inlet pressure Frost protection for outside installation Advantages Suitable for hot waste air Easy to maintain user interface Big flexibility with unsteady raw gas load Compact execution Durable construction Plant components made of corrosion and chemical resistant FRP 30 years of experience Active references of each size Worldwide delivery, installation and service
Request for a quoteDIADAYS MEDIKAL ÜRÜNLER TICARET LIMITED ŞIRKETI
Turkey
Material: Non Woven 10 Gsm Spundbond Fabric Comfortable elastic, secures sleeves to wrist and elbow, one size fits most people Disposable sleeve is convenient and hygienic, elastic upper sleeves are dustproof to protect against spills, splashes or debris from daily work, protect your clothing from dirt and grime Widely use: These sleeves are great for food processing and wet work tasks, ideal for use by cleanrooms, electronics manufacturing areas, the packaging industry, cleaners, decorators and craftsmen, Package Include: 100 pcs / 50 pairs,
Request for a quoteNETZSCH MASTERMIX
United Kingdom
The nano mill Zeta® RS is the next development of the worldwide known circulation mill system Zeta® type LMZ. Its field of application starts where the other agitator bead mill system Zeta® ends. The highly efficient centrifugal separation system enables the use of smallest grinding media from a diameter of 30 – 300 µm in reliable continuous operation. It is specially designed for wet grinding and dispersing processes especially "gentle dispersing" in the nanometer range. Working with the machines is a pleasure due to its easy operation. The agitator bead mill Zeta® RS is equipped with a swiveling grinding unit and lifting device with multiple positions for easy emptying, filling and cleaning ... ** click to know more **
Request for a quoteSTE TECPHARM
Spain
The High Shear Mixer Granulator is designed to optimize the wet granulation process. Used to turn a fine-powder heterogeneous mixture into a uniform granulation, with increased particle size and higher density, offering proper flow and compactness properties, in a short time process and with repeatability. Innovative high-quality equipment certified by accredited entities. Fully designed and built in Europe following regulatory requirements and the GMP´s normative. MAIN FEATURES ■ Standard equipment with capacities ranging from 25 L to 1.400 L. [Other dimensions on request]. ■ In-wall design to be integrated into the cleanroom. ■ Manufactured in AISI 316L. ■ Mirror polished Ra < 0,5. ■ No contact top cover without supports in the container. ■ Bottom impeller and side chopper to guarantee the intensive mixing in a very short time period. ■ Control of endpoint by time or by Torque. ■ PLC + HMI for the control in manual and automatic mode, with recipe editing.
Request for a quoteSTE TECPHARM
Spain
The Granulation Line integrates into a single frame and control panel all options for solid forms production process: ■ Mixing and Granulation: High Shear Granulator. ■ Drying: Fluidized Bed Dryer. ■ Calibration: Conical and Cylindrical Calibrators. It minimizes the space requested in clean-room, reduces the risks of cross-contamination, and gives maximum versatility to process development and scalability studies.
Request for a quoteResults for
Wet processing - Import exportNumber of results
31 ProductsCountries
Company type
Category