Vehicle oil - Import export

is a ultra high performance diesel engine oil for modern heavy commercial vehicles. It offers long oil change interval. The combination of state of the art additive technology with high quality base oils provides excellent oil circulation at cold start, high viscosity index, volatility control and fuel economy.

is a ultra high performance diesel engine oil for modern heavy commercial vehicles. It offers long oil change interval. The combination of state of the art additive technology with high quality base oils provides excellent oil circulation at cold start, high viscosity index, volatility control and fuel economy.

INOX SAE 10 W 30 INOX SAE 10 W 40 INOX SAE 15 W 40 INOX SAE 15 W 40 LA INOX SAE 5 W 30 HC - LS INOX SAE 20 W 50

Fullgear FD 20W-40, is an construction vehicle gear oil which is developed with quality base oil sand advanced technology additives for limited slip(LS) differentials, wet brake system axles and final drive units.

Fullgear FD 80W-140, is an construction agricultural vehicles gear oil which is developed with quality base oils and advanced technology additives for limited slip (LS) differentials, wet brake system axles and final drive units. Extreme Pressure (EP) additives in its formulation provides effective wear protection even under high stress.

INOX® Diesel bactericide disinfects the entire diesel system of vehicles and heating oil systems. It effectively destroys bacteria, yeasts, fungi and algae and prevents their formation. This prevents the fuel filter from clogging. A clean fuel system is a prerequisite for the smooth functioning of all system components, a clean combustion and thus an efficient engine operation!

Removes grease and oil residues from vehicle and machine parts and other devices. The highly effective formula removes dirt quickly and gently. Also protects against renewed corrosion. Other sizes available on request

INOX® Brake Cleaner is a highly effective cleaning agent for drum and disc brakes, brake linings and pads, clutch linings and pressure plates, as well as all parts in and around the motor vehicle which are contaminated with oil, grease, etc. Due to the high proportion of active ingredients, an intensive and fast-acting cleaning is achieved. No residues remain. It is not corrosive and generally does not attack rubber and plastics. However, due to the variety of plastics on the market, a compatibility test is recommended.

Fullpro HT SYN 10W-40, is a ultra high performance diesel engine oil for modern heavy commercial vehicles. It offers long oil change interval. The combination of state of the art additive technology with high quality base oils provides excellent oil circulation at cold start, high viscosity index, volatility control and fuel economy.

AUTOSOL® CAR CLEANER Highly effective, biodegradable basic cleaner for professional vehicle preparation. Effectively removes oil, grease and other soiling. Can be used on all surfaces that can be wiped off with a damp cloth, such as glass, metal, painted surfaces, plastics, etc.

PRODUCT DESCRIPTION Synplus SN GF-5 5W/20 represents the pinnacle of full synthetic engine lubricants, offering top-notch engine protection and fuel efficiency for both new and older petrol engines. This exceptional oil not only meets but surpasses the latest API SN Plus specification and boasts ILSAC GF-5 fuel efficiency performance. It’s also compatible with older API petrol specifications, making it versatile for various applications. Designed with a focus on meeting Ford specifications WSS-M2C945-A and Chrysler MS-6395, Synplus SN GF-5 5W/20 is particularly well-suited for vehicles requiring these standards, and it’s also recommended for many later model Subaru vehicles. This oil is meticulously crafted using full synthetic base oils and specially selected additives, resulting in a low SAPS (Sulfated Ash, Phosphorous, and Sulfur) high-performance engine oil.

It does not contain acid unlike other products in the market. Does not damage the rubber hose or aluminum parts in your vehicle. Cleans oil and dirt by dissolving.

HDDEO 10W-40 PLUS is a synthetic lubricant designed to provide a high level of protection for diesel and turbodiesel engines of modern commercial vehicles. It uses carefully selected unconventional bases, and additives of advanced high-performance technology. This allows to obtain a very high level of protection against engine wear, good fluidity at low temperatures, control of volatility and maintenance of viscosity at high temperatures. It is recommended for use in European industrial vehicles equipped with EURO IV and EURO V engines . HDDEO 10W-40 PLUS maintains its high performance characteristics for extended oil change intervals. Exceeds requirements: ACEA E6 / E7 / E9, API CI-4 / CF, MB 228.51, MAN M 3477, MTU Type 3.1, Renault VI RLD-3, Volvo VDS-4; DEUTZ DQC-IV-10 LA - SCANIA Low Ash, Mack EO-O Premium Plus Engines fueled by methane: MB 226.9 - MAN M3271-1

HDDEO10W-40 has been designed to provide a high level of protection for diesel and turbodiesel engines of modern commercial vehicles. It uses carefully selected non-conventional bases and advanced high-performance technology additives. This allows to obtain an extremely high level of protection against engine wear, good fluidity at low temperatures, control of volatility and maintenance of viscosity at high temperatures. It is recommended for use in European industrial vehicles equipped with large turbocharged and naturally aspirated engines that operate in severe operating conditions. HDDEO10W-40 maintains its high performance characteristics for long oil change intervals. Exceeds the requirements: ACEA E4 / E7, API CI-4 / CF, MB 228.5, MAN M 3277, MTU Oil Category 3, Renault VI RXD / RLD-2, Volvo VDS-3, Mack EO-N

H40 MARINE is a high quality marine diesel engine oil, developed for high horsepower, medium speed trunk piston diesel engines, running on distillate or light residual fuel with a maximum sulfur content of 1.5%. It is formulated with high quality paraffinic base oils and selected additives that provide excellent detergent, dispersant, anti-wear and oxidation resistance properties. Exceeds requirements: API CF

Specifically formulated for the lubrication of gearboxes of motor vehicles, agricultural and construction machinery, for which lubricants with EP or anti-wear characteristics are not required. Exceeds the requirements: API GL-4

Emulsifiable oil formulated with paraffinic mineral bases and with a modern concept emulator, which allows to obtain milky emulsions in water extremely stable over time and with high anti-corrosion protective power.

DISOIL is a mineral oil with low viscosity additives applicable on different surfaces (steel, plastic, planed wood, etc.). The DISOIL in contact with the fresh concrete generates a chemical reaction with the components of the cement mix such as to allow a perfect stripping, with a clean surface, for the formation of a thin water-repellent film which prevents the adhesion of the concrete to the surface of the formwork.

DIELETRIC OIL is a dielectric fluid for transformers, switches and rheostats. It has a high resistance to chemical-thermal degradation and reduces the formation of sludge and oxidation products. The low pour point ensures prompt circulation even at low temperatures, while the low viscosity allows rapid heat transfer for convective motions.

CVT is a fully synthetic fluid for continuously variable transmissions (CVT). It is suitable for most European, Asian and American cars and vans and can be used in many cars equipped with a continuous push belt variator transmission. CVT meets the specific technical requirements of automatic continuously variable transmissions, with particular attention to the friction coefficient. Exceeds the requirements: BMW / Mini cooper EZL 799, FORD CVT23, CVT30, MERCON C, GM / Saturn DEX-CVT, MB 236.20, VW / AUDI TL 52180, G052 180, G052 516.

CS BIO is a biodegradable fluid based on esters of vegetable origin.

ATF DXIII is a fluid for automatic transmissions, formulated for a very wide range of applications. The particular formulation allows its use in GM Dexron and Ford Mercon transmissions. It is also suitable for hydraulic couplings, power shifts, torque converters, power steering, power steering and manual transmissions, where an ATF type fluid is provided. In the motorcycle field it can be used in some transmissions, in telescopic forks and shock absorbers. Exceeds the requirements: GM DEXRON®III F / G, MB 236.9, ALLISON C4, Ford Mercon, ZF TE-ML 03D, 04D, 09B, 11B, 14A, 17C, CAT. TO-2

ATF DX II is a fluid formulated for universal type automatic transmissions, suitable for a very wide range of applications. The particular formulation allows use in transmissions where Ford Mercon and Dexron II D fluids are required. It is also suitable for hydraulic couplings, power shift systems, torque converters, power steering, power steering and manual transmissions, where they are required. ATF fluids. In the motorcycle field it can be used in some types of transmissions, in telescopic forks and shock absorbers. Exceeds the requirements: General Motors DEXRON® IID, ZF TE-ME 03D, 04D, 14B, 17C, MAN 339 D, MB 236.1 / 236.7, CAT. TO-2, ALLISON C4

ABF DOT 5.1 is a high boiling point non-silicone fluid for disc and drum brakes , compliant with SAE J 1703 / J 1704, FMVSS 116, DOT 5.1, CUNA NC 956 DOT 5.1 specifications. Exceeds the requirements: FMVSS 116 DOT 5.1, SAE J 1703 / J 1704, CUNA NC 956 DOT 5.1

ABF DOT4 is a mixture of inhibited polyglycols and alkyl ethers suitable for use in the braking systems of cars, trucks, buses and motorcycles, with the exception of systems with mineral oil hydraulics (e.g. Citroen). Compatible with all brake fluids conforming to its specifications unless otherwise indicated by the vehicle manufacturer. Contamination of ABF DOT 4 with petroleum products, water or other liquids can cause failure of the brake circuit. Exceeds the requirements: FMVSS 116: DOT 4, SAE J 1704, ISO 4925 Class 4

ABF DOT3 Brake fluid synthetic base for systems with disc brake Plumbing and drums and servo-controls of cars, commercial vehicles, industrial vehicles and scooters and motorcycles The DOT brake 3 for fluids is standards-compliant SAE – J 1703 and FMVSS 116 – DOT 3. Exceeds the requirements: FMVSS 116 DOT 3, SAE J 1703, CUNA NC 956 DOT3, ISO 4925

Fully synthetic oil for gasoline and diesel engines, with or without turbo Graphite 5W-30 Synth is a fully synthetic motor oil for gasoline and diesel engines in passenger cars and light duty commercial vehicles. This oil can be applied to cars equipped with catalytic converters, turbo charged engines or for direct fuel injection systems. Graphite 5W-30 Synth quickly forms a stable lubricant film during cold cranking and offers high thermal stability under heavy duty operating conditions. Graphite 5W-30 Synth not only offers an extremely good wear protection, but also protects against rust and corrosion, while special additives keep all parts free from dirt, sludge and deposits Graphite 5W-30 Synth offers fuel saving properties and can be mixed with both synthetic and mineral motor oils.

Your benefits Can be mounted on the pressure or suction side of a pump Space-saving installation, because no straight inlet/outlet sections are required Flexible mounting of the meter in horizontal, vertical or inclined positions Accurate measurement result, since the reading is independent of the temperature and viscosity of the fluid Minimum failure costs due to simple function monitoring, rapid fault analysis and the possibility of simple repairs on site Areas of application To measure heating fuel consumption by oil burners (for example, in heating boilers, industrial furnaces, tar processing plants) Consumption monitoring and optimisation (ships, generators and vehicles) Flow measurement for mineral oils Optional remote processing and integration into superior systems Fuel types Fluids according to ISO 8217-2012 Heating fuel extra light/light

KING PIN 2´´ KING PIN 3,5´´ KING PIN 2 KING PIN 3,5 MUDGUARD SINGLE TYRE MUDGUARD DOUBLE TYRE MUDGUARD SINGLE TYRE W / STRIPE MUDGUARD DOUBLE TYRE W / STRIPE HALF MUDGUARD SINGLE TYRE HALF MUDGUARD DOUBLE TYRE MUDGUARD PIPE MUDGUARD CONNECTOR METAL MUDGUARD CONNECTOR PLASTIC LANDING GEAR OMS LANDING GEAR JOST KARIA LAMP SET HAMBURGER LAMPS W / ADR FIRE EXTINGUISHER BOX WHEEL WEDGE TOOLBOX TOOLBOX METAL TOOLBOX LOCK OIL TANK WATER TANK WATER TANK PLASTIC ALLOY RIM GUARD RAIL ALUMINUM PROFILE SPARE WHELL CARRIER TRAILER SPARE WHEEL CARRIER PLATFORM SPARE WHEEL CARRIER TRUCK SPARE WHEEL WINCH TWIST LOCKER SINGLE BIG TWIST LOCKER SINGLE SMALL MANOMETER FITTINGS STICKERS STICKERS LONG VEHICLE REFLECTIVE BANDS REFLECTOR CE CERTIFIED TRAILER WARNING LABELS