Throughput sealing machine - Import export

Special sealers ME 455/605 VAD with air suction system (max 80%) suitable for volume reduction and better preservation of products. The machine is equipped with a double sealing bar with a sealing width of 5 mm, an electric pedal drive and pneumatic cylinders, mobile nozzles for air intake, an adjustable timer for suction, sealing and cooling. The ME 4510/6010 VAG model with a ATM gas injection system is also available. This variant is equipped with a double sealing bar with a 10 mm sealing width, electric pedal drive, mobile nozzles for air intake and gas injection, adjustable timers for suction, intake, sealing and cooling.

Sealing machine with stand and mechanical footswitch, constant heat sealing bars fot the closure of polypropylene bags and coupled in aluminum, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and temperature controller for controlling the temperature from 30 ° C to 200 ° C. The closing of the sealing bars by a mechanical pedal guarantees a high welding pressure and allows the sealing of high thickness envelopes with or without lateral bellows.

VERTICAL VACUUM SEALING MACHINE FOR BAGS - ALSO WITH MAP GAS INLET The sealers mod. DZQ 600 LS/DZQ 800 LS are multifunctional machines suitable for sealing and vacuum packing large bags and sacks, also in MAP (with technical gas injection). The vacuum pump of 20 mc./h. it minimizes air intake times and the machines are equipped with valves for the injection of inert gas for packaging in a modified atmosphere. The double sealing bars with a width of 10 mm. and compressed air closure ensure perfect sealing on any type of material, even of high thickness. The bars are closed by means of a double button command (dual safety control). The sack support surface is adjustable. Thickness max. bag mm. 0.20 (0.8 total with bellows) By means of selectors and potentiometers it is possible to set the "sealing", "empty time" and "gas injection time" functions. The machine is equipped with two nozzles which, when the vacuum option is activated, descend into the bag and perform suction.

Machine suitable for the closing of bags with height 200 to 700 mm and max weight. 10 kg. The system with two pairs of heating elements and belts PTFE allows the closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc .This particular welding system is strongly recommended in the presence of bags with high thickness and bellows side. The temperature is controlled by two electronic temperature controllers and the feed speed is adjustable. The distance between the solder and the edge of the bag is 30 mm. The welding head and the conveyor belt are independently adjustable in height through flyers. The machine is equipped with rotary solid ink marker and interchangeable characters (max. 20 characters with height 5 mm.). The system works with inked rollers for easy reading and comes complete with photocell to do the marking in the desired place.

ME-CFE CONSTANT AUTO SEALERS WITH MOTOR CONTROL Table top motorized sealer with electric pedal and welding bars at a constant temperature for sealing polypropylene bags and paired/laminated aluminium, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and thermostat for controlling the temperature from 30 ° C to 250 ° C. The closure of the bars it takes place through an engine which guarantees a high welding pressure (0,7 Kg./cm2) and allows the sealing of envelopes with hight tickness with or without side bellows. Operation The operation provides for the closure of bars and seals the bag following operator control, by electric pedal. This allows the operator to grab the bag with both hands, being able to perform a more precise sealing and parallel to the bag.

This special automatic table top/vertical with stand constant heat sealer. Are suitable for sealing polypropylene and paired / laminated bags, paper, barrier materials, etc. The sealing jaws of the type "hot bar" are equipped with resistance and thermoregulator for controlling the temperature from 30 ° C to 200 ° C. The closing of the jaws is through an electromagnet which ensures a high sealing pressure and allows the sealing of thick bags with or without side gussets. Operation The operation provides for the closure of bars and seals the bag following operator control, by electric pedal. This allows the operator to grab the bag with both hands, being able to perform a more precise sealing and parallel to the bag. The vertical model with pedestal can be tilted to 90 degrees, has a special support surface to support the bag during sealing. In this way the operator has both hands free to hold the bag since the sealing is made by pressing the pedal.

TABLE MONOBLOC SEALER WITH MANUALLY OPERATED SEALING BAR AN INCORPORATED ROLL HOLDER The SP 600 is equipped with sealing bar with NI-CR wire for simultaneous cutting and welding of the film. Allows to obtain a polyethylene or polypropylene bag, perfectly welded and trimmed, using the normal fold film. Suitable for use in laundries, shirt factories, the textile sector in general, but is also suitable for the food sector for the packaging of the bread. Operation: Place the coil with the open side facing the operator Insert the open-film blade between the two flaps Unroll the film to the desired length Lower the sealing bar and cut the bag Enter the product in the bag and make the welding of the side remained open.

MG 300 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 300 series, with 300 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Maximum weldable thickness 0.15 mm (0.30 tot). Available models: MG 300: bench sealing machine with manual closing of the bars MGM 300: bench sealing machine with motorized bar closing and electric pedal

The BaCo 2400 is a fully automated, linear motor driven, filling, foil application, foil sealing and capping machine, suitable for creamy to liquid filling media. Capacity: 35-40 pcs per minute Available versions: Fill/Seal, Fill/Cap, Seal/Cap, Fill/Seal/Cap machine frame from aluminium profile indexing transport system for jars horizontally working conveyor for jar infeed and discharge position control for jars in indexing rotary transport dosing pump from 1.4404 10 l hopper with level control filling nozzles driven by LinMot-e-motor pick and place system for pre-cut foils from magazines driven by LinMot-e-motor 1 spot sealer to fix the foil at the sealing rim of the jars sealing system with conduction sealing head capping station with LinMot-e-motor infeed conveyor for caps electric cabinet with operation panel manual central lubrication system safety doors with aluminium profile frame and windows from makrolon

The BaCo 2400 is a fully automated, linear motor driven, filling, foil application, foil sealing and capping machine, suitable for creamy to liquid filling media. Capacity: 35-40 pcs per minute Available versions: Fill/Seal, Fill/Cap, Seal/Cap, Fill/Seal/Cap • machine frame from aluminium profile • indexing transport system for jars • horizontally working conveyor for jar infeed and discharge • position control for jars in indexing rotary transport • dosing pump from 1.4404 • 10 l hopper with level control • filling nozzles driven by LinMot-e-motor • pick and place system for pre-cut foils from magazines driven by LinMot-e-motor • 1 spot sealer to fix the foil at the sealing rim of the jars • sealing system with conduction sealing head • capping station with LinMot-e-motor • infeed conveyor for caps • electric cabinet with operation panel • manual central lubrication system • safety doors with aluminium profile frame and windows from makrolon

TECHNICAL DATA. Mashine dimensions:1150x4995x182 h mm Capacity: 360-720 cycle/hour Cycle: 6-8 cycle/minute Container measurements: 187x137x80 h (8 part) Product capacity:1440 packages/hour Pump capacity: 200 m3 Voltage: 45A-400c 50 Hz kW: 7 kW Pneumatic feeding: 16 NI/6-8 bar Outer body: Stainless steel AISI304 Max Roll Width: 720 mm Warranty: 3 years Certificate: CE

CTT showcases an exceptional synergy of technology and precision in the field of numerical control (CNC) machining for ultra-high purity gas VCR components. By integrating cutting-edge CNC machining technology with high-quality stainless steel, CTT ensures that VCR accessories are resistant to corrosion and wear, maintaining peak performance even under extreme environmental conditions. The CNC machining process lies at the core of CTT's manufacturing approach, meticulously carving complex details and precise dimensions from raw materials. To further enhance the durability of the components, CTT employs electropolishing, a technique that not only refines the surface quality but also bolsters their corrosion resistance.