Results for
NORELEM FRANCE
France
Reinforced threaded inserts allow threaded holes which have been damaged, torn out or jammed to be used again or to be repaired. This makes it possible to recover scrap and rejects of expensive products. Reinforced threaded inserts are suitable for use in various materials, including light metals and casting. Inserts with internal threads larger than M6 are supplied with four locking pins instead of two. Permissible deviations: The medium tolerance class applies to the threads listed, i.e. 6H for nut threads and 6g for bolt threads. Other dimensions ±0.25 mm. With reinforced threaded inserts we also offer a version with a stronger cross-section for use in applications with greater stress. Technical information see operating instructions for threaded inserts.
Request for a quoteNORELEM FRANCE
France
Self-tapping threaded inserts for making high-strength, wear-free, vibration resistant screw connections in materials with low shear strength such as aluminium and aluminium alloys, brass, bronze, cast iron, duro and thermoplastics. The threaded inserts are tapered at the bottom and have a cutting slot. By screwing in they cut their own threads inside a receiver hole. This guarantees a completely secure and firm anchoring in the host material. Internal thread D1 acc. to ISO 6H. The threaded inserts with cutting slot spring slightly inwards in the slot region in some materials. This results in a screw locking effect. If this is not desired, we recommend the threaded inserts with a cutting bore.
Request for a quoteSPIROL
Germany
Flexible, versatile solutions for post-mold Insert installation into thermoplastic and thermoset plastics. SPIROL's Installation Machines are the ideal foundation for stand-alone systems and enhanced assembly systems provided by SPIROL. Our standardized, time-tested, modular designs are robust, reliable and easily adjustable — allowing simple customisation to meet the specific needs of your application. More than 80% of the components in the Insert Installation Machines we design are pre-tested and production-proven standard items. This translates into faster delivery, greater reliability, and lowest cost for Insert Installation Equipment of comparable quality. We specialize in custom application-specific part holding devices. Fixturing – holding your components accurately and firmly during insertion – is a critical element to the performance of your assembly equipment.
Request for a quoteSPIROL
Germany
Moulded-In Inserts are placed over core pins by an operator or a pick-and-place robot prior to the closure of the mould cavity during the plastic injection process. Moulded-In Inserts offer exceptional torque and pull-out resistance due to unrestricted plastic flow around the Insert body, and are often the Insert of choice for thermosets and engineered plastics with a high percentage of filler. The minor thread diameter tolerance is controlled to ensure positive positioning and perpendicularity of the Insert on the core pin during the moulding process. Series 63 is symmetrical eliminating orientation and Series 65 is the same body style in a blind ended version. SPIROL's Moulded-In Inserts are made from 2024 aluminium, a light-weight, lead-free grade. SPIROL’s Series 63 and Series 65 Moulded-In Aluminium Inserts are available in thread sizes ranging from M4 (8-32) up to M8 (5/16-18).
Request for a quoteSPIROL
Germany
The course external thread of SPIROL's Self-Tapping Insert forms an internal thread within a molded or pre-drilled hole during the installation process into a plastic assembly. SPIROL Series 10 Self-Tapping Inserts are thread forming Inserts best suited for softer thermoplastics or thermosets. Self-Tapping Inserts provide the best pull-out resistance for a post-mold installed Insert, yet generally cost more than their post-mold counterparts. The external threads are designed with a thin profile to minimize induced stress in the plastic and have a relative coarse pitch to provide the maximum plastic shear surface to resist pull-out.
Request for a quoteSPIROL
Germany
Press-In Inserts are designed to be pressed into a straight hole without melting the plastic prior to installation. Ideal for use in softer plastics, the helical knurls of the Press-In Inserts are used to provide both torque and pull-out resistance and to ensure good plastic flow as the Insert rotates into the hole. Installation torque to achieve sufficient tension between the threads is not a problem in that the helical knurls are designed so that the direction of the installation torque will have the tendency to drive the Insert into the hole — which of course is not possible — as the threaded joint is tightened. A pilot only slightly smaller than the hole and of sufficient length is designed to assure straight insertion into the hole. Press-In Inserts offer rapid installation with no specialized equipment and achieve good overall joint performance. If installation equipment is required, SPIROL also offers a standard comprehensive line of Insert Installation Equipment.
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
threaded insert manufactured by CNC turning and milling material: stainless steel male thread: 7/16-20 UNF-2A female thread: 1/4-20 UNC-2B groove milled. width 0.060 +/- 0.015 inch, depth 0.062 +/- 0.015 inch size: diameter 0.525 +/- 0.015 inch, height 0.54 +/- 0.015 inch packing: individually packed in plastic tray, carton Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Metric helicoidal thread inserts in stainless steel (helicoils) Reinforce the thread in low shear strength materials, such as aluminum, aluminum alloys, etc. Allow to restore a damaged thread to its initial size, ensure extremely reduced intervention time The reduced diameter of the first turn ensures that the thread insert can be placed into a hole like a regular screw For installation you may use taps and tools available in this sections: Thread insert taps, Installation tools for thread inserts Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and selftapping bushes, which have always been recognized by the market as products of excellent quality
Request for a quoteSPIROL
Germany
Heat / Ultrasonic Inserts are designed for post-mould installation in thermoplastics. Heat and ultrasonic installation yield outstanding performance results. SPIROL offers several different series of Heat/Ultrasonic Inserts available in a long and short version of each thread size. Long lengths maximize torque and pull-out resistance, while short lengths are good for less stringent requirements at lower cost and shorter installation times. Some styles are available with or without a head. The head provides bearing surface for the mating component that also prevents jack-out (or when used in reverse, can prevent pull through). However, adding a head results in additional cost raw material of a larger diameter is required to create the head. Some non-headed Inserts are symmetrical – thus eliminating the need to orient the Insert prior to installation.
Request for a quoteNORELEM FRANCE
France
The required torque is set by a set screw and a graduated scale. The set value can be secured using the lateral clamping screw. When the set torque is reached the grip audibly and palpably releases. The loosening torque is higher than the tightening torque so that the torque handle can be released without any problems. The internal thread version has a hole in the set screw so that the torque handle can also be used on threaded rods. Set torque accuracy ± 5%. On request: Other thread lengths.
Request for a quoteSPIROL
Germany
Some of SPIROL's standard Pin Installation Models can be equipped with a pusher punch (in place of a pin insertion quill) to press Threaded Inserts into plastic assemblies. The most appropriate Installation Machine depends on the actual insertion force required to press the Insert into the plastic hole and the desired productivity. Generally speaking, the Model PMH Heavy Duty Installation Machine is typically used for low to medium volume installation, and for medium to high volume installation, SPIROL's Model PH/PHX Platen-Style Installation Machines can be used for simultaneous installation of several Press-In Inserts at the same or different elevations. Due to the length to diameter ratio of Press -In Inserts, it is not possible to cost-effectively tube feed this type of Threaded Insert with SPIROL's automatic feeding and Installation machines.
Request for a quoteSPIROL
Germany
The SPIROL Model PH Heat Insert Driver provides an accurate and consistent method to simultaneously install multiple Threaded Inserts or Compression Limiters at multiple elevations. Simultaneous installation dramatically increases productivity and simplifies the number of manufacturing steps to complete an assembly. Additionally, the platen head and fixture can be easily changed to accommodate quick change-over to different assemblies associated with new production runs. This machine can be used to install 12 Inserts into 1 assembly, or a fewer number of Inserts into a larger number of assemblies – as long as the total combination does not exceed 12 Inserts.
Request for a quoteSPIROL
Germany
The SPIROL Model HA Automatic Heat Insert Driver provides an accurate and consistent method to install virtually any type of Heat/Ultrasonic Style Insert into thermoplastic assemblies. With this exceptionally versatile machine, the operator does not need to physically touch the Insert during the entire installation process. SPIROL’s Model HA Automatic Heat Insert Driver has been designed to eliminate the dependency on the operator to control the factors of time, temperature and pressure to ensure nearly perfect flow of the plastic for optimal retention and performance. The Model HA Automatic Heat Insert Driver installs Threaded Inserts ranging in size from M2 – M8 metric threads and #2 – 3/8 unified threads. The machine can be configured to accommodate a variety of applications and the heat tips are easily interchangeable to accommodate various sized Inserts.
Request for a quoteOTTO EICHHOFF GMBH & CO. KG
Germany
Turned parts Long turned partes, small turned parts Turned, milled and grinded parts Thread inserts in brass, steel and stainless steel Possible materials: Alloy AlCuMgPb, AlZn5,5MgCu etc. Brass CuZn39Pb3, CuZn40Pb2 etc. Stainless steel 1.4301, 1.4305, 1.4571, 1.4401, 1.4101 etc. Steel Machining steel, St52, St37, C45, etc. Special steels Titan, Hastelloy, Copper, Bronze etc. Surface treatments may be done as follows: Galvanizing, nickel, brown, hot-dip galvanizing, phosphating, anodizing, chrome plating, painting, powder coating, plasma coating, sandblasting, Tuflok coatings. All common surfaces as VDA standard are possible (zinc-nickel, zinc flake). Heat treatments such as Plasma / gas nitriding, carbonitriding, hardening, carburizing, vacuum hardening, tempering etc.
Request for a quoteOTTO EICHHOFF GMBH & CO. KG
Germany
The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.
Request for a quoteNORELEM FRANCE
France
Body and flange plate EN AW5754. Guide shafts steel Version Body, hardcoated Flange plates, anodised. Guide shaft, hardened. Note Maintenancefree pneumatic linear modules with two precision steel shafts and ball guide bushing with wipers. Double acting cylinder drive. All fastening threads have threaded inserts. The as accessory available shock absorbers and proximity switches can be integrated (no protruding edges). Positive fit construction for hundred per cent reproducibility. Combinations in all sizes and stroke variants are feasible without adapter plates. Repeat accuracies of ±0.01 mm are possible. Specified loads apply by centred carriages. On request Available with locking cartridge as stroke deviation safeguard. Accessory See table for shock absorber, proximitiy switch and plug connector.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SPANSET SECUTEX GMBH
Germany
Again and again, coils with larger internal diameters than expected have to be processed on coilers. Here the secutex coiler sheath offers a simple and flexible solution to the problem. Enlargement of the internal diameter The handy secutex coiler sheath is simply pushed onto the coil mandrel and enlarges the radius to the required size. The timeconsuming assembly of subcomponents is no longer necessary. Prevention of dents Thanks to the high friction of the secutex material, the coil cannot slip and, in some cases, the contact pressure can be significantly reduced. The typical impressions in the initial winding layers are prevented and material wastage is significantly reduced. The secutex material is extremely wearresistant and, unlike standard rubber, is also oilresistant. The insertion tip helps thread the coils.
Request for a quoteNORELEM FRANCE
France
Body carbon steel. Ball, ball bearing steel 1.2067. Form D: Ball with POM insert. Form H: Ball with POM insert. Form K: Ball with carbide insert. Form M has a carbide ball. Version: Body tempered and phosphated. Ball hardened. Form M ball nickel plated. Note: Self-aligning pads serve as stops, supports and thrust pads in fixture constructions. Ball secured against rotation. * Valid only if the minimum bore depth is observed. Drawing reference: Form C: with male thread, flattened ball, smooth. Form D: with male thread, flattened ball, with POM insert. Form F: with male thread, flattened ball, diamond grip. Form M: with male thread, flattened ball, with carbide insert. Form G: press fit, flattened ball, smooth. Form H: press fit, flattened ball, with POM insert. Form J: press fit, flattened ball, diamond grip. Form K: press fit, flattened ball, with carbide insert.
Request for a quoteZIMMER GMBH KUNSTSTOFFTECHNIK
Germany
When it comes to sophisticated plastic injection molding, we are completely in our element. We process all common thermoplastics, from standard to high-performance plastics. A fully automated production with handling systems for part removal and QA tests guarantees an economic production of your parts. We also have experience with the overmolding of various inserts such as threaded bushings, electronic contacts, circuit boards and much more. This and much more are the reasons why we are a reliable partner for almost all industries: Automotive industry aerospace industry Mechanical engineering Medical technology Construction industry Electrical engineering Jewelry and watch industry Furniture industry
Request for a quoteNORELEM FRANCE
France
Case-hardened and black oxidised. Note: Positioning feet are used as supports, stops and thrust pads for fixtures and general machine and appliance construction. Drawing reference: Form A: External thread and flat face Form B: External thread and convex face Form C: External thread and serrated face Form K: External thread and carbide serrated face Form L: External thread and POM insert Form D: External thread and flat face Form E: External thread and convex face Form F: External thread and serrated face
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV Plain to Screwed Thread Conduit Coupling Plain to screwed adaptors is designed with one side to fit rigid conduit and the other has an internal threaded end. Rigid conduit is inserted to the plain end and the threaded end requires a male adapter to be screwed into it.
Request for a quotePIRPED INTERNATIONAL
France
• Screws/Bushing and Inserts for automobile cam covers and other plastic modules • Rivet Nuts and Bolts, Threaded Inserts for fixing sheet metal • Automotive Turned Parts
Request for a quoteVITAL PARTS LTD
United Kingdom
Our range of Threaded Fixings & Threaded Fasteners includes a number of high-quality products that are excellent for fixing and fastening something into position, hence the name 'fixing hardware'.This selection enables threaded components to be inserted into applications such as wooden furniture, before attaching externally threaded products such as Adjustable Feet. Each product inside this range if made from high end metals to support a massive amount of weight per unit, offering the best value for money inside the United Kingdom. We keep a large range of sizes and styles in stock of these fixings, for the full selection please visit our website. You can also request free samples along with finding the bulk pricing for a specific product variation.
Request for a quoteVITAL PARTS LTD
United Kingdom
Our range of Adjustable Feet includes a number of solutions that are perfect for increasing or adding height to your table or furniture. Also known as Threaded Furniture Feet thanks to their recommendations for use with furniture and chairs, these are ready for installation into almost any threaded application, where a thread is already or can be easily installed. Each of these components comes with a thread that allows for them to be screwed into all female threaded applications such as a threaded wood insert or fixing. Our range features a number of standard and bespoke, unique solutions that suit every possible usage including with machinery and industrial equipment. Each of our Adjustable Feet is available for free sampling, so that you can get a proper feel for the product before you use it for a long term fitting. This ensures the weight capabilities and properties of the foot, especially for heavier duty uses where the weight rating is essential.
Request for a quoteFINN-KORKKI OY
Finland
Our LuxTop -luxury aluminium closures have been developed together with our partners to offer you a luxurious and aesthetic closure to your premium beverage. LuxTop closure consists of a fine aluminium cap and a plastic thread insert. Over many years Finn-Korkki has built a strong set of skills in luxury aluminium closure design, development, and manufacture. These skills have allowed us to offer luxury aluminium closure solutions to different beverage manufacturers. Our key skills are in offering design ideas, experience of stamping aluminium of various thicknesses and knowledge of techniques for securing a plastic thread into an aluminium cap. LuxTop -Luxury aluminium closure gives an excellent look and feel to your premium beverage, and it strengthens the brand message from the packaging side. The closure can be branded by combining different colours for the plastic thread insert and the aluminium cap. The top of the aluminium cap can be printed or embossed.
Request for a quoteCONEC ELEKTRONISCHE BAUELEMENTE GMBH
Germany
D-SUB Standard, Solder pin – Angled, .370" 9.4 mm, Precision machined contacts, Metal bracket Mounting styles: — with mounting bracket and 4-40 UNC or M3 threaded insert — with mounting bracket, PCB clip and 4-40 UNC or M3 threaded insert — Quality class 3 (also available in quality class 1) — Shell: Steel tin plated (brass tin plated or stainless steel available on request)
Request for a quoteGEISSEL
Germany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, sealing insert: TPE, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -40 °C to +100 °C, short connection thread with two-piece sealing insert long: M16 - M63 / PG9 - PG48, long connection thread with two-piece sealing insert long: M16 - M63, short connection thread with one-piece sealing insert long: M12 - M63 / PG7 - PG48, long connection thread with one-piece sealing insert long: M12 - M63
Request for a quoteGEISSEL
Germany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, lamellar insert: TPE, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -40 °C to +100 °C, short connection thread with two-piece sealing insert, M16 - M63, short connection thread with one-piece sealing insert, M12 - M63
Request for a quoteResults for
Threaded inserts - Import exportNumber of results
93 ProductsCountries
Company type
Category