Thread rolling - Import export

Bearing block and carriage aluminium alloy, anodised. Guide columns stainless steel, ground. Spindle stainless steel, rolled thread. Guide bearing maintenancefree. Version Radial play on guide < 0.02 mm. No axial backlash. Spindle selflocking, with additional lock. Note The almost playfree guides and absolutely playfree spindle allow for adjustment without the need to loosen or clamp the spindle. The scale graduation is in 5 or 10 increments; 1 increment corresponds to 0.1 mm of travel. The cross stage can be easily combined with positioning stages, vertical stages and other accessories of respective size by the modular principle.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: Overlengthed (long shank) L=150 Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Using TAPTITE 2000® ensures that in metal-joining applications, you can eliminate work processes such as tapping and the use of additional fastening elements. The fastener is screwed straight into a cast or drilled core hole. The polygonal cross-section geometry of the shaft of the screw ensures that the thread is chiplessly formed, so that if a repair is needed it can accept a conventional threaded screw. This provides some significant quality advantages: easy to position the screw low tapping torque high vibration resistance high vibration resistance high pre-load forces high assembly reliability Your commercial benefits: The overall cost of fastenings is reduced by up to 88%.

PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces

Indulge in ultimate comfort with our Hospitality Floor Cushion Pillowcase. Made from percale cotton, this piece delivers a luxurious and soft feel. With a touch of exceptional elegance and durability, our pillowcase enhances the sleep experience, ensuring a peaceful and rejuvenating rest. DETAILS 65cm x 85cm 100% Percale Cotton 200 threads White roll frame around This product does not include a cushion with filling CARES

Experience exceptional comfort with our Hospitality Floor Cushion Pillowcase, crafted with a blend of percale cotton and polyester. This pillowcase offers the softness of cotton combined with the durability of polyester percale, ensuring peaceful and enjoyable nights of sleep. Elevate the hospitality experience with this piece that combines comfort and resilience. DETAILS 65cm x 85cm 50% Percale Cotton and 50% Polyester 180 threads White roll frame around This product does not include a cushion with filling CARES

Introducing our stylish pillow sham designed for the hospitality industry, crafted with a harmonious blend of cotton and polyester. With a soft touch and exceptional durability, this pillow sham not only adds a comfort element to hospitality spaces but is also easy to maintain. Provide your guests with a sophisticated rest experience with this pillow sham for hotel-grade comfort. DETAILS 65cm x 85cm 50% Cotton and 50% Polyester 150 threads White roll frame around This product does not include a cushion with filling CARES

K-TITE high-performance thread rolling fasteners are specially designed to lower your in-place fastening costs. K-TITE fasteners form internal threads into plain holes in ductile materials upon initial installation, which: • Eliminates the need to pre-tap the nut member • Reduces problems associated with assembling screws and bolts into pre-tapped holes, such as cross-threading

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

With our delivery program “Screws for direct screwing” we deliver a great variety of thread rolling screws in different implementations. In doing so we realize small lot sizes and short-term delivery dates. Upon request we also introduce customer-oriented warehousing also in your company. Apart from the many advantages you can save time and money. We provide: KTG screws for thermoplastic materials: single pass thread or double pass thread (high/low); head shapes with cross or 6-star (similar Torx). Tapping screws: longitudinal slot, cross slot, cross-head-combination slot or 6-star (similar Torx). DIN 7981, 7982, 7983 or to the new ISO standards; special tip-styles, e.g. with with pressed washer. Combination screws with undetachably washers: According to DIN 6901. Self-tapping screws: According to DIN 7500. Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry...

Bent wire parts represent a separate part of our production range. Bent parts differ from springs such as extension springs, compression springs and wave springs in terms of how they are produced. This type of spring is not only processed with automated machinery, but also involves a considerable amount of special handling, which we perform using our range of state-of-the-art equipment. Precision production with our high-tech machinery: Our range of machinery with an in-house toolmaking workshop enables three-dimensional bent parts to be produced with a wide variety of forms and with specialised finishes applied to the ends. Our range of machining processes includes: Bevelling, embossing, thread cutting, thread rolling, turning and milling. For bent wire parts, both CNC bending and mould-based bending are possible as production solutions.We process wire thicknesses of 0.20 to 8.00mm.Tool-based: 0.50 to 8.00 mm. Coating of part surfaces: Oiling, Vibratory finishing, Galvanisation.

Bolt with head (according to EN 22340) Bolt without head (according to EN 22341) Stud bolts (stress bolts) (according to DIN 2510) Blocking pins Fox bolts (according to DIN 1434 etc.) Spacer bolts Threaded bolts, threaded pins, stud bolts, threaded rods (according to DIN 913-916, 939, 976, 2510) Double-threaded bolts with rolled-on thread on one or both sides

Lubrication of open toothing, friction and rolling bearings, threaded spindles, hinges, guides on windlasses, ship´s cranes, underwater devices, offshore components or in wet areas of the textile industry Corrosion protection of moving parts subject to seawater in coastal and marine areas or constant influence of water Advantages and benefits Excellently suited as a waterproof special grease above and under water Highly effective due to optimum wear and outstanding corrosion protection Economical due to combined protective effect Lubrication of open toothing, friction and rolling bearings, threaded spindles, hinges, guides on windlasses, ship´s cranes, underwater devices, offshore components or in wet areas of the textile industry Corrosion protection of moving parts subject to seawater in coastal and marine areas or constant influence of water Advantages and benefits Excellently suited as a waterproof special grease above and under water

Dimensions Wire diameter: 0,3 – 4,5 mm spring-hardened Wire diameter: 0,3 – 7,0 mm soft Part length: customer specific after consultation Profiles other than round wire after consultation Material All spring materials and quality steels with lower strengths Coating All commonly coated spring steels Additional coatings available after consultation Meeting the closest tolerances Specialities Partial machining Stamping Thread cutting or rolling Fully automated mating with other parts Mounting and component manufacturing Processing of painted wires Rapid prototyping

Threaded bolts DIN 976-1, type A M3 to M6 x 96 mm Double threaded bolts wth a rolled-on unilateral or bilateral thread M2.6 to M10 mm Length of up to 1.000 mm Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

High feeding accuracy, quick cycles and simple operation Servo feeding in compact design with maintenancefree AC servo motor Fits just about any press +/ 0,025 mm feeding accuracy through incremental servo encoder Lightweight rollers with special hard chrome layer Mechanical pilot release Sturdy steel plate bolton design Height adjustment via threaded spindle Catenary rolls and edge guides at machine entrance Stock guides at exit Highperformance control with good functionality; with remote control for setup on 3,5 m cablel 24 V DC proximity switch adjustable piloting lever to be mounted to press pneumatic pilot release

Parts are made to custom design from drawings, from very small quantities to industrial mass application, pursuant to standards, in a wide range. We supply components in accordance with customer requirements, with a special or knurled surface, and with a range of head forms, such as ring, eyelet, hook, triangle or ligature. Screws, bolts and axles from 1.5 mm to 12 mm can be made with lengths of up to 397 mm; customer lengths available on request (also on request with lock serrations). Knurled axles (knurling either DIN or to customer requirements), threads of M2 to M12 made of plastic or wood or with rolled thread, thick or thin shafts. Ligatures with threads of M2 to M8, or wooden thread with or without weld warts. Rivets and pins with diameters of 1.2 mm to 10 mm, with or without bevelling. Also knurled (knurling either DIN or to customer requirements).

Bearing block and carriage aluminium alloy, anodised. Guide columns stainless steel, ground. Spindle stainless steel, rolled thread. Guide bearing maintenancefree. Position indicator plastic. Version Radial play on guide < 0.02 mm. No axial backlash. Spindle selflocking, with additional lock. Note Due to the practically playfree guides and absolutely playfree spindle, loosening or clamping of the spindle is not required during adjustments. Digital position indicators with 0.1 mm display accuracy, digits increase with right rotation. The display value of the position indicator can be adjusted by turning the carrier ring. The mounted position of the position indicator can be set in 4 positions with a screw. Within the respective sizes, the positioning stages can be easily combined using the modular principle. Drawing reference Assembly position of position indicator a) top (standard) b) right c) bottom d) left

ECOROLL multi-roller tools are usually used for roller burnishing. Types G, R and RA machine cylindrical through and blind bores, stepped bores and cylindrical external surfaces including similar non-cylindrical surfaces. . RP, RK, RKA and RKAK tools are designed for plane surfaces, cones and spherical surfaces. RH/RHA tools deep roll fillets and chamfers. FA tools deep roll large thread root radii. All ECOROLL multi-roller tools can be used on CNC turning, drilling or milling machines and machining centers or on conventional machine tools. They can be characterised by reliable functioning and high precision. Adjustment of diameters is very convenient, and only nominal lubrication is required. Futhermore, replacement of wear parts is very simple. This uncomplicated maintenance and short primary processing times enable significant time savings.

Wireway Fastener material: aluminum alloy 6061-T4 thread grade: rolled/cut 3/8-18 NPSM thread x 0.39 +/-0.04 inch size: cap outer diameter 0.995-0.997 inch, height 2.50±0.03 inch cap slot - width 0.062±0.010 inch, depth 0.093±0.010 inch Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Lens Frame Fastener material: stainless steel 303 chamfer - both ends 0.09±0.03 inch thread grade: rolled 3/8-18 NPSM thread x 0.82±0.03 inch size: cap outer diameter 1.00±0.03 inch, height 1.38±0.03 inch cap groove - width 0.062±0.015 inch, depth 0.093±0.015 inch through hole diameter 0.39±0.03 inch, for wireway Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

China Metal Parts Factory Custom Threaded Rod, Threaded Jointed Parts, Threaded Connecting Parts according to customers’ design or sample. Name: Threaded Rods, Threaded Connecting Parts Material: Carbon Steel, Stainless Steel Finished: Zinc Plated, Chrome plated, Chemical Cleaning Machined type: Lathe Turning, Chipping, Drilling Hole,Thread Rolling / Cutting Our customized threaded rods are mainly used for connection and fastening, not for transmission purposes.The thread rods mainly produced by Rolling or Lathe cutting. We can produce threads base on ISO Metric Screw Threads & UN Threads. Ming Xiao Mfg provide Quality OEM custom services for metal machine parts, has various machining processes, can meet the processing requirements of different types of metal parts, welcome send inquiry to us.

We can custom all kinds metal lathe turning parts such as Tube coupling, hose coupling, turning parts, shaft, pipe joint parts, hose connectors & transition connectors, copper machined tube, flange,bushing, knighthead, pedestal, Piston Rod, insert long pin, Dowel Pin, Drive Pin & Rod,ball head bolt, long rod machined parts, long thread tube parts, nonstandard thread bolt & nut,Extension Rod, etc The technics & capabilities for mechanical parts : manual lathe turning,automatic lathe turning, numerical control lathe turning, Drilling, Grinding, Thread rolling, knurs rolling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc. The telorance can reach to +/- 0.02mm, and the surface roughness can reach N6 standard after milling. Lead time for custom metal machining samples is 10days. COC, Test Report, Rohs, plating report, coating reports, is available !.

adjustable sheet length mains and battery operation sensor version and much more attractive design, user-friendliness, flexibility and technical sophistication Highest yield and low consumption due to single sheet output and automatic sheet replenishment Battery or mains operation (1 set of batteries included, mains adapter must be ordered separately if required) initial supply of batteries = service life approx. 70 rolls easy paper tear-off lockable, secure and theft-proof easy handling and best accessibility for every user (lock on the bottom) easy assembly and disassembly due to mounting rail use of existing drill holes possible dispenser removable by wall bracket automatic paper feed extremely fast start-up very easy threading of the paper rolls sheet length regulation in short, medium and long modern, elegant design hard plastic - robust and extremely stable all parts can be replaced separately, e.g.

• Fully engaged rolled bonnet threads provide protection from process media by a metal body / bonnet seal. • Swaged self centering non rotating Duplex stem point ensures positive seat closure under all conditions. • Rolled stem threads protected from process media by fully adjustable sandwich’ packed gland. • Fully back seating - bonnet with anti blowout stem. • Totally encapsulated dust seal gives greater stem thread protection. • Vibration proof handle with positive location and excess torque break feature. • NACE MR-01-75 standard. • Fully developed field mounting system for all products. • All options available. Full range of materials, thread types and sizes. • Conformance to ASME B31.1 • Pressure - Temperature ratings as listed in ASME/ ANSI B 16.34 Class 2500. • All Pressure wetted parts fully traceable and certified in accordance with EN10204 31B. • Material of construction as listed in ASME/ANSI B 16.34. • Guaranteed 4 time factors of safety at Class 2500.

LMT Fette rolling heads generate the thread or required form and then open automatically after rolling. Before the next thread can be rolled the head has to be put back into working position, means the head must be closed. The completely new designed closing clip, delivered as standard, already allows an flexible and user friendly layout of the process for closing the rolling head. Another significant optimization of the closing process can be realized with the new closing device (CCD) for EVOline. Adapted between rolling head and shank and connected with the coolant supply, closing of the rolling head can be transferred from process time to the non-productive time of the machine. Closing by coolant (or even compressed air) can be integrated in the machine program by a simple function.

Threaded stems (spindles) from our serial production are used for example in the actuator technology for medical engineering and for the furniture industry. The fabrication steps used for the serial stems (spindles) usually consist of thread rolling or whirling with a subsequent turning process.