Test station - Import export

A scientific test station and laboratory unique in France are directly adjoined to the POITTEMILL and FORPLEX administrative offices. Discussions between the customers and our technical teams begin in the test centre along with the detailed analysis of their raw materials in order to obtain all the necessary information for a successful project outcome. The laboratory and test centre are fully equipped to respond to the requirements of our different customers in the fields of grinding, crushing and micronization of raw materials.

In addition to being able to work on site in an emergency to diagnose an unexpected breakdown and repair your installation, we are equipped with: a comprehensive machine fleet (numerically-controlled machining centres, lathes and milling machines, mortising machine, press, drilling machines, rolling machines, semi-automatic welding station, TIG/Plasma/Oxycutting station) meaning that we can manufacture products to measure and supply all your replacement and wear parts in an emergency an assembly workshop (mechanics, hydraulics, pneumatics, electrics, automation), lifting equipment and testing and programming stations, where mechanical and electrical assemblies and sub-assemblies can be produced urgently and with a high degree of flexibility

Within the frame of quality assurance, the forged pieces of this client have to be checked in an inline inspection with respect to several parameters: Inner and outer diameters, as well as the absence of surface defects have to be verified. Video of inline forgings inspection for dimensional accuracy and surface defects with QuellTech LaserScaner. Particular Challenges Manual inspection carried out until now turned out to be not reliable enough, particularly after an increase in production. The final rejection rate has seriously affected the productivity of the entire manufacturing process. A solution for a contactless inline inspection was needed. The QuellTech Solution A testing station including an index table has been designed. This configuration acts as a support for two QuellTech Q4-60 laser scanners, used for inspection of the parameters mentioned above.

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. Rather than a pressure gauge, the PS 403-US has a vacuum manometer. In the PS 403-US model, the control buttons are replaced by toggle switches. With flow measurement. The test gas is conditioned (humidified)

Test station for revising gas detection devices. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. Rather than a pressure gauge, the PS 403-U has a vacuum manometer. With flow measurement. The test gas is conditioned (humidified)

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

Test station to review the gas detection devices. The control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 is possible. All gases can be connected to 1 liter aluminum compressed gas cans. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

EOL test stand for e-charging columns and their power electronics for the simulation of different electrical loads and mains fluctuations. The test stand has automatic contacting and achieves high test throughputs in end-of-line operation. Different variants of the power electronics of electric charging columns can be tested. On the software side, Merecs Engineering relies on NI-LabVIEW and NI-TestStand.

Test station for foot-activated parking brake

Rotary indexing assembly table for power window mechanism including testing station .

Axial bearing 1000 N press, locking ring assembly and testing station

Design Gear – The customised special gearbox For everyone who expects more: special gearboxes from the specialist. We provide gear solutions for your individual performance requirements, including designs, tooth developments, prototype manufacture, extensive tests and documentation, right up to the delivery of the series. Our customised gears include: Single-stage bevel gears as control or reverse gears Labyrinth-sealed gears with a degree of efficiency of > 98% High temperature gears for ambient temperatures of up to 300°C Saw drive gears Test station gears with output speeds of up to 12000 min -1 Double gears with two transmission ratios Robotic gears Spur gears High precision gears And much more

The RESISTOMAT® model 2329 is particularly suitable for fast measurements of low resistances in automated processes. Up to 50 measurements per second can easily be performed. The device complies with the latest CE guidelines and is designed for laboratory use as well as heavy-duty industrial applications. A 2-fold and 4-fold comparator with switching outputs has been included for classifi cation and selection; this feature is particularly useful for serial tests. One special application involves the measurement of contact resistances (dry-circuit measurement); the load voltage in this case is limited to 20 mV in order to prevent fritting (DIN IEC 512). The RS232 (standard) and IEEE488, USB and Ethernet (option) computer interfaces allow the set-up of fully automatic testing stations. The PLC interface allows easy integration into your production process control.

For everyone who expects more: special gearboxes from the specialist. We provide gear solutions for your individual performance requirements, including designs, tooth developments, prototype manufacture, extensive tests and documentation, right up to the delivery of the series. Our customised gears include: Single-stage bevel gears as control or reverse gears Labyrinth-sealed gears with a degree of efficiency of > 98% High temperature gears for ambient temperatures of up to 300°C Saw drive gears Test station gears with output speeds of up to 12000 min -1 Double gears with two transmission ratios Robotic gears Spur gears High precision gears And much more

New fully automated machine for the production of bags,disposable plastic gloves made of HDPE / LDPE foil. Machine started, tests done. Possibility to check. Station with double unwinding, equipped with clutches for smooth adjustment of HDPE tape tension, double inverters controlling unwinding. The machine uses a central drive that controls all mechanisms responsible for forming production. The feeding of the material is controlled by a stepper motor (servo drive) enabling precise feeding of the HDPE or LDPE tape to the welding position and the final product sorting point. Possibility of changing the welding dies to different sizes of gloves or the production of bags, e.g. for breakfast. Capacity approx. 160 pieces / min Power consumption: 10 Kw Compressed air demand: 8 BAR Weight: 1300 kg

miromatic – Large container / handling stations (tubs) are semi-automatic system components for separating, filling, sealing and capping tubs and canisters and can be used individually or in combination. This enables the precise and modular realisation of your specific tasks on the basis of tried and tested stations. Container separating stations Filling positions with filling valve(s) or manual filling stations Sealing stations with head space gassing or evacuation Capping and screwing systems We would be delighted to integrate these or other handling stations in your production process. A common, unified transport system is only one reason for the reliability of each station and the interaction with the upstream and downstream processes. Buffer sections and synchronisation devices are standard here, and can also be combined with our stockpiling systems.

The VA 40 variable area flowmeters are suitable for measuring liquids and gases The standardized device design is available with various connections that conform to standards. The glass measuring cone, protected by a metal sleeve with a viewing glass, makes it easy to read the flow directly and observe the medium. The suitability for measuring the flow of gases in accordance with the DVGW G260 process sheet has been certified by the DVGW testing station at the Gas-Fired Thermal Institute in Essen.

Reliable Opto-Electronic Characterization for DC and RF Values The opto-electronic test station NanoTest PIC HD complies with all requirements for the testing of high-density photonics integrated circuits, such as silicon photonics structures or active PICs. Probe cards with up to several hundreds of contacts provide the connection for DC and RF measurements.

NanoHybrid provides a large degree of versatility. The active alignment, test and assembly station combines various assembly methods including gluing, laser welding or selective laser soldering. In addition, the station offers opto-electronic testing capability. Therefore, NanoHybrid is ideally suited for the development and small serial production in manufacturing companies or in research institutes. In such a product development area, an active alignment station needs to cope with opto-electronic and other precision devices with varying sizes and characteristics.

Moisture meter Name: Kil-Mo-Trol monitoring system Material: Lumber, Wood, Timber, Hard wood, Soft wood Calibrations: Wood Overview Track wood drying progress - Pinpoint problem areas in the kiln - Determine end-point for shutdown Ideal for dehumidification kilns and small drying operations, KIL-MO-TROL® lets you monitor the moisture content of lumber during the drying process. With testing stations at each lumber package and a rotary switch box in your control room, you can quickly get an overall view of your progress. Proven for both hardwood and softwood drying, the KIL-MO-TROL can be used in any type of dry kiln, pre-dryer, or airdrying operation. Your Benefits: It’s as easy as mounting your rotary station selector switch, running main cables out of the control room, installing pins and load cables at each station, and connecting the main and load cables. Then connect a Delmhorst moisture meter to the station selector and start taking readings! Click here to learn more abou

These test stations are designed for pressure testing of valves with an operating pressure of up to 5,500 bar. Gas compressors and pressure reservoir for testing with nitrogen as well as hydraulic stations for connecting and switching valve drives are available. The complete high-pressure valve test station is controlled with a central control panel. Mobile or fixed pressure testing pump can be used to generate pressures of up to 5,500 bar.

Quality made by Siempelkamp Based on decades of experience and using state-of-the-art technology, we oer individual, comprehensive testing of your components. Key features Advantages highly-qualied sta numerous certications (see download area) individual pressure and leakage tests non-destructive testing methods (VT, PT, MT, UT and test station for RT) Innovative 3D laser and video scan measurement techniques decades of experience mobile hardness testing greatest accuracy state-of-the-art technology

ZwickRoell`s HDT/ Vicat all round instruments have been designed in a manner that enables them to be convenient for testing in research and development, inwards checks of goods, monitoring of production and also in education and training. Versions with up to 6 testing stations can be made available. The instruments include measuring stations which can be lowered in an automatic manner and then there is the optional test-weight lowering. The optional re-cooling device is able to reduce the oil re-cooling time as a result of which high test-rates are a possibility. The advantages included here are that the tests possible to the standards of ISO 306, ASTM D 1525, ISO 75 and ASTM D 648. Key Advantages and Features: - Measuring station lowered automatically - Optionally available automatic test-weight lowering - Optional internal re-cooling device for rapid attainment of starting temperature - Testing to ISO 306, ASTM D1525, ISO 75 and ASTM D648.

Coaxial highpressure valves are valves with two connections and two switching positions. The pressure range extends from vacuum up to 400 bar. The wall thicknesses for the valve housing and head tube as well as the selection of the seals and the retaining screws are specially designed for high pressure applications. This series is typically used in gas filling stations and test benches, in compressor and hydraulic systems and in washing machines. The KB valve types have a special feature They do not require dynamic plastic seals and can be used in cryogenic application.

Gas-Pro of the company Crowcon is developed for protection in tight, dangerous areas. Gas-Pro offers display up to 5 gases in a compact, robust solution, which Resist tough areas and everyday use! Features of Gas-Pro Measurement up to 5 gases at the same time Clear dispay on top of the device, with two-coloured back lightening Internal pump (optional) Automatic, fail-safe detection of suction adapter Special mode for use before access Three-coloured safety- display Obvious alarm display: vibration alarm, signal tone >95dB and clearly visible red/blue LEDs Integrated, shock-proof casing with protection class IP65 & IP 67 against penetration of water and dust Suitable for use with newest gas test stations, for portable use, wall- or table assembly. Following gases can be measured (max. 5/device): Combustible gases (Ch4; 0-100%LEL) Chlorine (0-5 ppm) Carbon dioxide (0-5 vol.%) Carbon monoxide (0-500 ppm) Ozone (0-1 ppm) Oxygen (5-25 vol.%) Sulphur dioxide (0-10 ppm) Hydrogen...

With the simple, robust and maintenance-free single gas monitor GasAlertClip Extreme of BW-Technologies a reliable monitoring and detection is secured (e.g. personal security) of all threats by single gases, whereby the measured value is displayed in real-time. The operating time is limited to 2 years and absolutely maintenance-free, batteries neither need to be charged nor to be exchanged. Thanks to simple operation time exposure reduces considerably, therefore this device is excellently suitable for industrial applications. Features of GasAlertClip Extreme: Large LCD-display indicates remaining operation lifetime in months, days, and hours Impact- and water-resistant Self-test of all functions of sensor, battery, electronic and acoustic/ optical alarm Compatible with the automatic testing station “BW-MicroDock II” Bright, wide-angles blinking alarm display With integrated vibration alarm for surroundings with higher noise level Daily self-test activated by user Recording and...

The PS200 Series combines quality, ruggedness and advanced technology in a user friendly, portable gas monitor. It is compact, lightweight, water resistant, extremely robust, and is certified to multiple international and regional standards. The PS200 can measure any combination of LEL, O2, CO and H2S making it suitable for a wide range of personal monitoring and confined space applications. PS200 Auto Bump/Calibration Station The multifunctional Auto Bump/Calibration station provides simple but intelligent testing and calibration of the PS200 portable gas detector. Easy to use, with a durable, user friendly design, this automated test station offers high performance from a PC or stand-alone unit. The Auto Bump/Calibration station dramatically improves compliance record-keeping, efficiency, and accuracy. Once the PS200 is placed in the dock it can be tested, calibrated, and charged. Extremely cost effective, the station requires no testing and minimal effort by users.

BORRIES built-in impact units are suitable amongst others for marking applications on transfer lines, rotary tables or testing stations. Because of the big usable stroke workpieces with different heights can be marked without any adjusting.