Supply direct - Import export

Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s

Factory Direct Supply Durable Reusable And Recycled Zippered Non Woven Shopping Tote Bag

"Focquet offers three-phase induction motors in cast iron or aluminum housings. The dimensions and power correspond to the values of a standard motor, but have been modified to allow braking applications. The disc brake is supplied with direct or three-phase alternating current by a rectifier located in the motor terminal block. Our solution is always a parking brake. Standard motor size and power rating, aluminum and cast iron chassis."

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat Connection for external thermostat Chassis for easier movement

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor, whose pressure is displayed on a manometer. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value

The cartridge emptying ViscoMT-C offers the possibility to empty 180 ml cartridges, 310 ml Euro cartridges and 600 ml or 950 ml cartridges in industrial use. Your advantages: - Plunger without direct air supply - Supply of media to the dispenser(s) - Venting option after cartridge change - electrical "empty" and "almost empty" message Controls: - Pressure sensor for inlet pressure control - Pneumatic pressure reducer for pre-pressure adjustment Application: - for low-viscosity media up to viscous media - Media examples: Silicones, adhesives, resins, greases, color pastes, metal-filled pastes Necessary and optional components: Dispenser suitable for dosing (separate article)

Kullen-Koti disc brushes can be supplied with various fill configurations. For example with compressed face, with narrow or large fill collars, with fill array in particular forms, either with normal vertical bristle bundles or with inclined bundles to all directions. We supply core material according to your application purpose, for example cores made of plastic qualities PP, PA, PE, POM or PVC as well as of wood or different steel and metal types. On request of big quantities it is worth to use moulded plastic cores. Almost all fill material qualities can be used, e.g. natural hairs and bristles, plant fibres, synthetic filaments and wires. We can supply disc brushes matched to your requirements with bore hole, thread or shaft for fitting in the machines.

The ViscoMT-XS hobbock emptying system offers a modern way of emptying containers.The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from approx. 5 l to 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers - direct dosing as pulsation-free flow rate

GMN offers a complete range of sizes, types and designs with its spindle ball bearings in standard sizes S, SM and KH. In conventionally oil-lubricated spindle bearings, lubricant is supplied through a lateral oil supply. GMN spindle bearing designs +A, +AB, +L and +LB provide direct oil supplies to the lubrication point through a bore in the outer ring. GMN spindle bearing designs +AG ensure the highest possible machine running times without complex oil supply systems. These feed the lubricant directly into the lubricating point through holes in the outer ring. The developed high-performance, separable BNT and BHT designs ensure fast and uncomplicated handling, especially with regard to assembly and maintenance.

Importer, manufacturer and supplier to the food and catering industries, we offer premium quality cashew nuts. Our nuts are certified ORGANIC and are intended for manufacturers of repackaging and retail resale in bags (for hotels, chain stores, marketplaces, organic stores, restaurants), as well as for flavoring and the production of mixtures of nuts and dried fruits. Our cashew nuts can also be used in the food industry as a quality ingredient in other products such as butter, flour, milk, confectionery, bakery products and chocolate. We offer the opportunity to integrate cashews from Tanzania, which are larger and sweeter than Asian ones, into your dried fruit offer. The benefits of fresh cashews are obvious. We have reduced delivery time to 2 months from Africa to Europe or America, keeping cashews fresh and whole. We believe in direct supply chain. We are happy to provide all the necessary information!

Anin is a Nama word that translates to many birds. The Nama People is a member of the Khoikhoi people of Namibia and live in the Southern parts of the vast Namibia. Heidi von Hase established Anin Embroidery in 1987 by initially supplying materials and providing creative direction to the women. The motifs chosen mostly depicted the many birds of Anin itself and familiar scenes from village life in Hoachanas – set against a backdrop of makeshift houses and dusty yards. Strips of fabric and threads were given to the embroidering ladies to work onto. These strips formed both the functional and aesthetic appeal that is still the core feature of the ‘anin style’ today. Finding this practically creative way to create a functional craft by sewing up tablecloths, cushion covers and later bed linen, Heidi took the women’s skills to another level. Tourists came from far and wide to see the craftsmanship of incredibly gifted hands and purchase a souvenir for friends and family.

Ready for world wide use — Full Unicode support: all global languages can be printed for companies with international customers — Support of all True Type Fonts (TTFs): maximum design flexibility for your print — XML-based data structure and communication protocol: globally used standard for data compatibility — Sturdy and high-quality stainless-steel casing designed for daily work in rough industry environments — 24V power supply: for direct integration into machines and systems

The UV-plant PURION 400 is made from electropolished stainless steel 1.4571. The PURION 400 is applied to disinfect drinking water up to a flow rate of 300 l/h and a transmission (or turbidity) of the water of at least 90% per T1 cm. Due to the compact design and the options for power supply with direct current the UV-Plant PURION 400 is perfectly suitable for mobile applications. advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The UV-plant PURION 2500 36 W PRO is made from electropolished stainless steel 1.4571. The PURION 2500 36 W PRO is applied to disinfect industrial water and emulsions up to a flow rate of 1000 l/h with a transmission (or turbidity) of the fluids of 20 - 90% per T1 cm. The PURION 2500 36 W PRO can equipped with an Operating Time Counter (OTC) to monitor the UV lamps service live. It is possible to have the power supply with direct current 24 V DC. advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The UV-plant PURION 500 PRO is made from electropolished stainless steel 1.4571. The PURION 500 PRO is applied to disinfect industrial water up to a flow rate of 200 l/h and fluids up to a flow rate of 200 l/h with a transmission (or turbidity) of the fluids of 20 - 90% per T1 cm. The PURION 500 PRO can equipped with an Operating Time Counter (OTC) to monitor the UV lamps service live. It is possible to have the power supply with direct current. advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The UV-plant PURION 1000 PRO is made from electropolished stainless steel 1.4571. The PURION 1000 PRO is applied to disinfect industrial water and emulsions up to a flow rate of 400 l/h with a transmission (or turbidity) of the fluids of 20 - 90% per T1 cm. The PURION 1000 PRO can equipped with an Operating Time Counter (OTC) to monitor the UV lamps service live. It is possible to have the power supply with direct current. advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

Our absolute classic. Probably the most frequently sold spray head in the world. Universal spray head, very robust and suitable for all applications. Due to the large channel diameters and a direct supply, our HTR spray head can also be used with especially critical and viscous media. The quantity is dosed in the front at the nozzle. Our HTR spray head is available in two variants: The HTRR spray head has an M6 thread for fastening to a customer-side mount. The HTRB spray head has a ball joint. This allows it to be attached flexibly and precisely with the flexible HPM Technologie mounts. All of our spray heads are available individually or as a spray head group. The spray head group contains air and fluid connections (check valve) for the distributor. An optional check valve mounted on the spray head prevents the fluid from dripping out through the spray head in the case of a critical line route or critical positioning

The outdoor version of the H2 Core Hydro Cab is a plug and play solution for small and medium sized H2 demands. It is the solution to integrate Enapters and other 19” modules to a complete system. Every Enapter Electrolyser is capable to produce up to 0.5 Nm³/h. The output volume of every electrolyser can be set between 60% and 100%. The Hydrocab combines up to 4 modules to a single plug and play module. An optional Dryer module can increase the purity from 99.9% to 99.999%. The optional Water Purification System (WPS) can provide the needed water with the quality of < 20 µS/cm. A Water Tank Module can be installed and stores 38 l of deionized water. It is equipped with a pump which provides the needed supply pressure or the electrolyser modules. The WTM takes the space of one electrolyser and is needed when no direct water supply can be provided. Also it is recommended when more than one cabinet will be installed parallel.

The H2 Core Indoor HydroCab is a plug and play solution for small and medium sized H2 demands. It is the solution to integrate Enapter and other 19” modules to a complete system. Every Enapter Electrolyser is capable to produce up to 0.5 Nm³/h of hydrogen. The output volume of every electrolyser can be set between 60% and 100%. The HydroCab combines up to 5 modules to a single plug and play module. An optional Dryer module can increase the purity from 99.9% to 99.999%. The optional Water Purification System (WPS) can provide the needed water with the quality of < 20 µS/cm. A Water Tank Module (WTM) can be installed and stores 38 l of deionized water. It is equipped with a pump which provides the needed supply pressure or the electrolyser modules. The WTM takes the space of one electrolyser and is needed when no direct water supply can be provided. Also it is recommended when more than one cabinet will be installed parallel.

Air supply from the outside The insert is equipped with a direct supply of air from the outside to the furnace. The air can be supplied through a 100mm diameter flex pipe or a 150x50mm rectangular duct . The damper knob is located in the upper part of the insert facade. Regulation of the air supplied to the combustion process The amount of air supplied to the combustion process is regulated by means of a knob located in the lower part of the façade. Air is taken from a direct air inlet and delivered under the grate and directly onto the glass, creating an air curtain that prevents excessive soiling of the glass.

Air supply from the outside The insert is equipped with a direct supply of air from the outside to the furnace. The air can be supplied through a 100mm diameter flex pipe or a 150x50mm rectangular duct . The damper knob is located in the upper part of the insert facade. Regulation of the air supplied to the combustion process The amount of air supplied to the combustion process is regulated by means of a knob located in the lower part of the façade. Air is taken from a direct air inlet and delivered under the grate and directly onto the glass, creating an air curtain that prevents excessive soiling of the glass.

Advantages of the UNIFLAM PRESTIGE fireplace insert Air supply from the outside The insert is equipped with a direct supply of air from the outside to the furnace. Air can be supplied through a 100mm diameter flex pipe or a 150x50mm rectangular duct The damper allows you to adjust the chimney draft and control the rate of combustion. The damper knob is located in the upper part of the insert facade. Regulation of the air supplied to the combustion process The amount of air supplied to the combustion process is regulated by means of a knob located in the lower part of the façade. Air is taken from a direct air inlet and delivered under the grate and directly onto the glass, creating an air curtain that prevents excessive soiling of the glass.

Advantages of the UNIFLAM PRESTIGE fireplace insert Air supply from the outside The insert is equipped with a direct supply of air from the outside to the furnace. The air can be supplied through a 100mm diameter flex pipe or a 150x50mm rectangular duct . The damper knob is located in the upper part of the insert facade. Regulation of the air supplied to the combustion process The amount of air supplied to the combustion process is regulated by means of a knob located in the lower part of the façade. Air is taken from a direct air inlet and delivered under the grate and directly onto the glass, creating an air curtain that prevents excessive soiling of the glass.

Made of pure aluminum with a perfect surface finish and homogeneous metal structure (anodized quality). Depending on the desired surface (glossy or matt), high-gloss rolled or one-sided brushed (satin) aluminum is used. The printed image appears in transparent, bright colors and lets the metal structure shine through. In its effect, this shade differs from any paint color. The surface is completely smooth. The advantages at a glance: Unrestricted weather black, Bright colors 5-7 years Solvent Resistant Practically against all aggressive chemicals such as nitro, acetone etc. Scratch-proof against mechanical rubbing of switches, keys, coin pieces and much more. Graffiti-proof Paint smears with nitro wipe easily and quickly! temperature independent The anodizing bath. Aluminum is anodized in the supply of direct current in sulfuric acid solutions. This anodizing gives aluminum an artificial “natural” protective layer.

Connection Types, 1 – BOTTOM OPEN END CONNECTION It can be applied to all models. The “Direction Plug” supplied with the radiator free of charge is placed between 3-4 slices in radiators from the direction of hot water inlet to the 10th slice, and between 4-5 slices in radiators larger than 10 slices. The air vent valve should be installed across the direction plug. 2 – CROSS-CONNECTION It can be applied to all models. Hot water inlet and air vent valve must be at the top. 3 – PARALLEL CONNECTION It can be applied to all models. Hot water inlet and air vent valve must be at the top. 4 – BOTTOM ENTRANCE OUTLET (HB) CONNECTION It can be applied to all models. Direction plug is installed during factory manufacturing. Hot water inlet should be made from the outside and cold water outlet should be made from the inside. If hot water is input from the opposite side, only the 4th slice will be heated. 5 – COMPACT INTEGRATED THERMOSTATIC VALVE CONNECTION It can be applied to all models.

Connection Types 1 – BOTTOM OPEN END CONNECTION It can be applied to all models. The “Direction Plug” supplied with the radiator free of charge is placed between 3-4 slices in radiators from the direction of hot water inlet to the 10th slice, and between 4-5 slices in radiators larger than 10 slices. The air vent valve should be installed across the direction plug. 2 – CROSS-CONNECTION It can be applied to all models. Hot water inlet and air vent valve must be at the top. 3 – PARALLEL CONNECTION It can be applied to all models. Hot water inlet and air vent valve must be at the top. 4 – BOTTOM ENTRANCE OUTLET (HB) CONNECTION It can be applied to all models. Direction plug is installed during factory manufacturing. Hot water inlet should be made from the outside and cold water outlet should be made from the inside. If hot water is input from the opposite side, only the 4th slice will be heated. 5 – COMPACT INTEGRATED THERMOSTATIC VALVE CONNECTION It can be applied to all models.

USE : For night and into tunnels Works. ADVANTAGES : Wide beam of light on all the Working Zone. The PA-2 Projector is a Self-Contained Unit for 11 Hours of Portable Lighting. Battery : 24 Volts - 28 Ah. Power : 55 Watt - Life 11 hours Dimensions : 550 x 400 x 270 mm - Maxi Height = 2.50 m. Weight : 28 Kg The PA-2 Projector comprises : 1 - Projector Bulb 55 W (Protection Index IP-66) Compact Box bi-component : Shockproof and Waterproof. Supply Voltage 24 V direct current. Spiraled Cable Electronic Ballast Assembly of bulbs without tool. 2 - Telescopic Tripod in aluminium alloy Adjusting from 1.1 to 2.5 m. Pneumatic Cushioning Device With an adjustable Foot in height to balance the gradients. 3 - Supply Unit (Protection Index IP-54) Transport Box in polythene (black). with aluminium lateral Frame 2 Transport Handles 2 x 12 V /28 Ah Dry Batteries 230 V Automatic Charger Function Lights, 3 Steps Load Indicator Integrated Protection Sheet with cover, with Feeder Cable. 4 - Transpo