Supply direct - Import export

Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat Connection for external thermostat Chassis for easier movement

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor, whose pressure is displayed on a manometer. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value

The cartridge emptying ViscoMT-C offers the possibility to empty 180 ml cartridges, 310 ml Euro cartridges and 600 ml or 950 ml cartridges in industrial use. Your advantages: - Plunger without direct air supply - Supply of media to the dispenser(s) - Venting option after cartridge change - electrical "empty" and "almost empty" message Controls: - Pressure sensor for inlet pressure control - Pneumatic pressure reducer for pre-pressure adjustment Application: - for low-viscosity media up to viscous media - Media examples: Silicones, adhesives, resins, greases, color pastes, metal-filled pastes Necessary and optional components: Dispenser suitable for dosing (separate article)

Kullen-Koti disc brushes can be supplied with various fill configurations. For example with compressed face, with narrow or large fill collars, with fill array in particular forms, either with normal vertical bristle bundles or with inclined bundles to all directions. We supply core material according to your application purpose, for example cores made of plastic qualities PP, PA, PE, POM or PVC as well as of wood or different steel and metal types. On request of big quantities it is worth to use moulded plastic cores. Almost all fill material qualities can be used, e.g. natural hairs and bristles, plant fibres, synthetic filaments and wires. We can supply disc brushes matched to your requirements with bore hole, thread or shaft for fitting in the machines.

The ViscoMT-XS hobbock emptying system offers a modern way of emptying containers.The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from approx. 5 l to 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers - direct dosing as pulsation-free flow rate

Ready for world wide use — Full Unicode support: all global languages can be printed for companies with international customers — Support of all True Type Fonts (TTFs): maximum design flexibility for your print — XML-based data structure and communication protocol: globally used standard for data compatibility — Sturdy and high-quality stainless-steel casing designed for daily work in rough industry environments — 24V power supply: for direct integration into machines and systems

The UV-plant PURION 400 is made from electropolished stainless steel 1.4571. The PURION 400 is applied to disinfect drinking water up to a flow rate of 300 l/h and a transmission (or turbidity) of the water of at least 90% per T1 cm. Due to the compact design and the options for power supply with direct current the UV-Plant PURION 400 is perfectly suitable for mobile applications. advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The UV-plant PURION 2500 36 W PRO is made from electropolished stainless steel 1.4571. The PURION 2500 36 W PRO is applied to disinfect industrial water and emulsions up to a flow rate of 1000 l/h with a transmission (or turbidity) of the fluids of 20 - 90% per T1 cm. The PURION 2500 36 W PRO can equipped with an Operating Time Counter (OTC) to monitor the UV lamps service live. It is possible to have the power supply with direct current 24 V DC. advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The UV-plant PURION 500 PRO is made from electropolished stainless steel 1.4571. The PURION 500 PRO is applied to disinfect industrial water up to a flow rate of 200 l/h and fluids up to a flow rate of 200 l/h with a transmission (or turbidity) of the fluids of 20 - 90% per T1 cm. The PURION 500 PRO can equipped with an Operating Time Counter (OTC) to monitor the UV lamps service live. It is possible to have the power supply with direct current. advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The UV-plant PURION 1000 PRO is made from electropolished stainless steel 1.4571. The PURION 1000 PRO is applied to disinfect industrial water and emulsions up to a flow rate of 400 l/h with a transmission (or turbidity) of the fluids of 20 - 90% per T1 cm. The PURION 1000 PRO can equipped with an Operating Time Counter (OTC) to monitor the UV lamps service live. It is possible to have the power supply with direct current. advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

Our absolute classic. Probably the most frequently sold spray head in the world. Universal spray head, very robust and suitable for all applications. Due to the large channel diameters and a direct supply, our HTR spray head can also be used with especially critical and viscous media. The quantity is dosed in the front at the nozzle. Our HTR spray head is available in two variants: The HTRR spray head has an M6 thread for fastening to a customer-side mount. The HTRB spray head has a ball joint. This allows it to be attached flexibly and precisely with the flexible HPM Technologie mounts. All of our spray heads are available individually or as a spray head group. The spray head group contains air and fluid connections (check valve) for the distributor. An optional check valve mounted on the spray head prevents the fluid from dripping out through the spray head in the case of a critical line route or critical positioning

The H2 Core Indoor HydroCab is a plug and play solution for small and medium sized H2 demands. It is the solution to integrate Enapter and other 19” modules to a complete system. Every Enapter Electrolyser is capable to produce up to 0.5 Nm³/h of hydrogen. The output volume of every electrolyser can be set between 60% and 100%. The HydroCab combines up to 5 modules to a single plug and play module. An optional Dryer module can increase the purity from 99.9% to 99.999%. The optional Water Purification System (WPS) can provide the needed water with the quality of < 20 µS/cm. A Water Tank Module (WTM) can be installed and stores 38 l of deionized water. It is equipped with a pump which provides the needed supply pressure or the electrolyser modules. The WTM takes the space of one electrolyser and is needed when no direct water supply can be provided. Also it is recommended when more than one cabinet will be installed parallel.

The outdoor version of the H2 Core Hydro Cab is a plug and play solution for small and medium sized H2 demands. It is the solution to integrate Enapters and other 19” modules to a complete system. Every Enapter Electrolyser is capable to produce up to 0.5 Nm³/h. The output volume of every electrolyser can be set between 60% and 100%. The Hydrocab combines up to 4 modules to a single plug and play module. An optional Dryer module can increase the purity from 99.9% to 99.999%. The optional Water Purification System (WPS) can provide the needed water with the quality of < 20 µS/cm. A Water Tank Module can be installed and stores 38 l of deionized water. It is equipped with a pump which provides the needed supply pressure or the electrolyser modules. The WTM takes the space of one electrolyser and is needed when no direct water supply can be provided. Also it is recommended when more than one cabinet will be installed parallel.

Made of pure aluminum with a perfect surface finish and homogeneous metal structure (anodized quality). Depending on the desired surface (glossy or matt), high-gloss rolled or one-sided brushed (satin) aluminum is used. The printed image appears in transparent, bright colors and lets the metal structure shine through. In its effect, this shade differs from any paint color. The surface is completely smooth. The advantages at a glance: Unrestricted weather black, Bright colors 5-7 years Solvent Resistant Practically against all aggressive chemicals such as nitro, acetone etc. Scratch-proof against mechanical rubbing of switches, keys, coin pieces and much more. Graffiti-proof Paint smears with nitro wipe easily and quickly! temperature independent The anodizing bath. Aluminum is anodized in the supply of direct current in sulfuric acid solutions. This anodizing gives aluminum an artificial “natural” protective layer.