Stainless steel tap - Import export

Sorelia white clay stone is made from 100% natural ingredients. It has been manufactured in France for over 20 years. It is certified ecological by Ecocert Greenlife. Ecological, economical and effective, it cleans, degreases and removes limescale from all surfaces, in the kitchen, bathroom and garden. Sorelia white clay stone degreases: ceramic, induction, gas or electric hotplates, oven grills and doors, barbecues, plancha, dishes and pans, microwave ovens. Sorelia white clay stone descales: stainless steel and synthetic resin sinks, taps, washbasins, shower screens, shower trays and bathtubs. Sorelia white clay stone cleans the refrigerator, freezer, garden furniture, car rims and windscreen, white trainers, golf clubs. Sorelia white clay stone can be used everywhere: at home, in the garden, at work, on the boat, in the camper van or caravan.

High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel This is the most popular model of self-tapping inserts with two cutting slots in the conical end part of the insert. Due to the cutting slots, the thread inserts remain anchored in the material even under strong shocks or vibrations. Suitable for most applications. Ensat 302 standard These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.). These self-threading bushes have an internal thread for the screw and an external thread with cutting slots to insert itself into the material Made in the EU.

High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel Long version with three cutting holes, Ensat 308 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Similar to Ensat 307 but longer, so can be applied in thicker materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.). These self-threading bushes have an internal thread for the screw and an external thread with cutting slots to insert itself into the material

High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel Short version with three cutting holes, Ensat 307 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Also Ensat 307 inserts are shorter than Ensat 308 and therefore ideal on thinner materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.).

Thread standard: Metric, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: For stainless steel Material of product: HSSE Surface treatment: VAP For materials: Stainless steel, Wear resistant steel, High alloyed steel Tensile strength up to: 1400 N/mm2 Standard: DIN 352 Tolerance: ISO2/6H The oxide surface (vaporized) improves the adhesion of the cutting oil and provides a stabil lubricant film. Cold welding in the tap flanks is reduced. Set of 3 taps (taper, intermediate, finish). Three-piece hand taps- sets are used for regular threads with coarse pitch, as the thread profile area is larger than for fine threads and the force effects on the taps are greater. The advantage of three-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: For stainless steel Material of product: HSSE Surface treatment: VAP For materials: Stainless steels, Copper alloys and copper-zinc alloys etc* Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry and surface treatment for Stainless steel. The oxide surface (vaporized) improves the adhesion of the cutting oil and provides a stabil lubricant film. Cold welding in the tap flanks is reduced. The conical reduced leading thread improves chip drain and reduces thread friction. Tap for machine use in blind holes. The fast spiral flutes provide good chip removal from the blind hole. Materials: Stainless Steels, Inoxable Steels, V2A (AISI 304), V4A (AISI 316), Steels up to 900 N/mm² Copper alloys and copper-zinc alloys (long-chipping) Our taps and dies are produced to the highest quality standards, to ensure precise quality threads.

High MIG welding robot connection. Specially designed NBR rubber with progressive sealing wafer construction (optional EPDM). Lug construction sealing gasket ensures proper fixation and prevents tension in rubber. Bolts are Teflon coated. Saddle and stirrup are fully passivated. Completely made of stainless steel AISI 304 (optional AISI 316). Branch BSP / Polsafe (optional NPT). Water PN10 Gas 300 mBar Stirrup is protected against contact corrosion by rubber.

The sheet metal is made of stainless steel 304 and powder coated steel in the color black RAL9011. The aluminum heat exchanger is insulated with XPS and equipped with a stainless steel tap spiral with a diameter of Ø8.5 / 9.5mm and connections of 1/2 "male thread. The cooler is equipped with overcurrent and high pressure protections. A signal lamp and a potential-free contact are provided as a fault indication. The control is done by an electronic controller with display.

Stainless Steel Self tapping Screws

VALENTINA - Single-lever sink tap Stainless steel supply hoses Without exhaust

MINIMALIST - SINGLE LEVER SINK TAP Stainless steel supply hoses C3515 cartridge

QUADRO - SINGLE LEVER SINK TAP QUADRO Stainless steel supply hoses C3515 cartridge

MINIMALIST - SINGLE-LEVER ROUND SINK TAP Stainless steel supply hoses C3515 cartridge

SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible in gray PVC 120cm Black shower with mechanical stop

SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible gray PVC 120 cm Black shower with mechanical

SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible gray PVC 120 cm Chromed shower with mechanical stop.

STANDARD - SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible gray PVC 120 cm Black shower with mechanical stop

SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible gray PVC 120 cm Chromed shower with mechanical stop

SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible gray PVC 120 cm Black shower with mechanical stop

SATIN SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible gray PVC 120 cm Satin shower with mechanical stop

SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible gray PVC 120 cm Chromed shower with mechanical stop

SINGLE-LEVER HAIRDRESSER TAP Flexible stainless steel supply hoses, 70 cm long Flexible gray PVC 120 cm Chromed shower with mechanical stop

Single-lever hairdressing tap Flexible stainless steel supply hoses, 70 cm long Flexible gray PVC 120 cm Chromed shower with mechanical stop

Single-lever hairdressing tap Flexible stainless steel supply hoses, 70 cm long Flexible gray PVC 120 cm Red shower with mechanical stop

Universal urban fountain, suitable for all audiences (children and adults) and their faithful pets and accessible to wheelchairs. Galvanized and thermo-lacquered steel is combined with stainless steel. It has independent taps in upper pools. These adapted urban fountains are ideal for drinking in playgrounds, schools, sports centers, etc. The Universo FHU-03 fountain guarantees durability, aesthetics and functionality. It is manufactured by combining hot-dip galvanized and thermo-lacquered steel, in a tone of your choice from the Ral letter, with AISI 304L stainless steel (basins, and optionally in central decoration).Some of its technical characteristics are: absence of breakdowns, timed taps, and soft pulsation, robustness, adjustable and protected water outlet, hidden shut-off and regulation keys to protect against vandalism.“Urban drinking fountain Model FHU03: REGISTERED DESIGN in the EEC. Title owned by R. Martín Mena S.L."

FM-01 recycled plastic fountain from the Hercules series. A dream came true: Hercules urban fountains legacy for posterity. Made of 100% recycled plastic, providing a solution to a circular economy.Characteristics that define the source of 100% recycled plastic FM-01:Manufactured without impregnation.Reduces landfills by using recycled plastic.100% Recyclable.Neutral to water.Unlike of wood or steel, it is not affected by the weather. It is lighter than concrete and cheaper than stainless steel. Body made of 100% recycled plastic. Drain grate in 100% recycled plastic, with a galvanized steel frame for better fixing (also available in stainless steel). Timed chrome-plated brass faucet. Anchorage by direct embedment Body (100% recycled plastic): Width: 160 mm. Depth: 240 mm. Height: 1000 mm. (on ground)Grid (100% recycled plastic):Measures:500 x 1000 x 80mm Weight:Grid:15.7 kg.Frame: 5 kg.

Features of the double drinking fountain in 100% recycled plastic FDM-01: Manufactured without impregnation. Reduces landfills by using recycled plastic. 100% Recyclable. Neutral to water. Unlike wood or steel, it is not affected by the elements. It is lighter than concrete and cheaper than stainless steel. Body made of 100% recycled plastic. Drain grate made of 100% recycled plastic, with galvanized steel frame for better fixation (also available in stainless steel). Timed chrome-plated brass faucet. Anchoring by embedding Body (100% recycled plastic) Measurements: Width: 160 mm.; Depth: 240 mm.; Height: 1000 mm. (on ground) Grid (100% recycled plastic) Measurements: 500 x 1000 x 80 mm. Grid Weight: 15.7 kg. Metal frame: 5 kg. A dream came true: Urban fountains Hercules legacy for posterity. Made of 100% recycled plastic, providing a solution to a circular economy.

This complete Crete washbasin set provides a fresh and soothing atmosphere in your bathroom. Select the dimensions of the oak table top and choose from different wood color treatments. Oak washbasin: 40-120x40 cm wide Black marble washbasin with a rough exterior: 30x30x15 cm Stainless Steel Faucet + siphon + drain plug Suspension brackets for washbasin Do you also love the atmospheric Greek natural interior style? The Crete washbasin sets made of black raw marble are then completely suitable! When it comes to bathrooms, you naturally want bathroom furniture and washbasin furniture that match your style. Apply a natural and personal style to your own bathroom! This Crete table and sink furniture are ideal for an authentic and attractive bathroom. Make your bathroom super cozy. Create a Greek and rustic atmosphere with the different traditional elements of the complete Crete bathroom washbasin. The Crete set consists of a coarse black marble washbasin

TECHNICAL DETAILS Product Code OC1/60MX-4S Energy Type Gas Gas (Mbar) 21/25-30/50 Power(kW/kcal) 6,5/5590 Capacity (Cooker) 2 Dimensions (cm) 40x60x30 Weight (Kg.) 18