Stainless steel discs - Import export

Bladed Horizontal surface aerator suitable for circular, racetrack or rectangular channel. Designed to be maximise oxygen and flow. Use of high-quality materials of construction together with mechanical gear driven equipment. Reliable equipment with extremely long service life. COMPONENTS Brush bridge shaft with anti-corrosion paint Galvanised Steel brush blades or stainless steel Side protection discs Bearings Vertical geared motor with high energy class IE3 enclosure and eciencies Horizontal geared motor with energy class IE3 enclosure and eciencies Geared motor support bracket Upstream and/or downstream rotor cover Automatic grease cartridge Operator safety features on and upstream of the brush aerator

SPIROL offers a line of austenitic stainless steel Disc Springs in diameters ranging from Ø8mm to Ø71mm. Austenitic stainless steel is typically used for static and low cycle applications that require a heightened level of corrosion resistance. It withstands fresh water and atmospheric marine conditions very well, and is suitable for many other industrial conditions including acidic environments. This material will continue to work harden with use so cycle life is limited, but creep resistance is good. SPIROL supplies both single Disc Springs as well as Pre-Stacked Disc Springs in custom configurations, packaged in shrink wrap with a perforated tab for easy of assembly.

Shrink disc to connect a hollow hub to a shaft. They are mounted on the OD of the hub and generate pressure on the hub wall by reducing the ID with wedgeformed rings, creating a press fit between the hub and shaft. They are suitable for static, dynamic and shock loads. for extremely high torques no axial shaft/hub offset when assembling selfcentring The version 23380014072 has high tensile ISO 4762 screws. Assembly Remove existing transportation locks. Clean and lightly oil shaft, internal and external hub diameters. Do not use MoS2 or grease. Slide shrink disc onto hub. Then slide unit (shrink disc/hub) onto shaft and position correctly. Gently tighten clamping screws one after the other by hand. Then use a torque wrench to tighten the clamping screws crosswise in several increments to the defined tightening torque MS. 1st increment approx. 33% MS 2nd increment approx. 66% MS

The force to be measured must be introduced axially and perpendicularly to the entire surface of the inner and outer bands of the sensor in the opposite direction. Conversion of the acting force into an electrical output signal is performed by strain gages connected together in a full bridge circuit. To achieve optimal accuracy, the base of the sensor should rest on a smooth level surface, hardened to at least ≥ 58 HRC with sufficient dimensions. The base cover welded to the surface has a stabilizing effect on the sensor element. Lateral forces must be avoided anyway as they distort the measured results. Tension and bending relief for the sensor cable is to be carried out on the machine side. FEATURES: — Measuring ranges from 0 ... 100 N to 0 ... 200 kN — Centric throughout hole — Flat disc design — Made of stainless steel — Completely welded sensor body — Nominal characteristic value standardization possible — burster TEDS optionally available

SIZE 60MM 70MM 80MM 90MM

Body: Ductile Iron / Stem,Springs: Stainless Steel / Disc: Brass or Aluminium or Bronze / Disc gasket or Disc washer : EPDM / ** Connection Type: Flanged or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** The wet alarm valve is designed for applications where the water is unlikely to freeze. The water staying pressurized in the pipes is released over the fire area after the sprinkler is activated due to fire. The pressurized water system is not only feed contionuously, but also fills in the retard chamber. After the chamber is filled, the pressure switch on the chamber is actuated. The pressure switch sends the alarm information to the fire warning system or the automation system. After the pressure switch is actuated, the water is delivered to the water-motor gong and releases a mechanical alarm.

Disco Check Valve / Wafer Type ** Body : MS 58 Brass - From( DN15-DN100) / Ductile Iron (EN GJS 400-15) - From (DN125-DN200) / Spring, Disc, Centering : Stainless Steel / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar / Connection Flanged- Wafer Type *** Applications Area : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids / Liquid Fuel Systems

Stainless steel series – for applications where corrosion resistance and high transmissible torque is required. This new design of Shrink Disc is made from stainless steel forged rings and uses high strength stainless steel screws. These units are available from 14mm to 195mm bore. Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very concentric and well balanced connections that are suited to high speed applications. Traditional shrink fits require complicated calculations, close machining tolerances...

• 3 blade discs from stainless steel • the appliance can be fold away space savingly • three rubber feet ensure secure hold on the work- surface

Grinding disc for stainless steel. Grit A30P. Type 27 depressed centre. Main features and benefits: Top quality and long life are the main features of this product specially designed for removing any metal material rapidly and efficiently. Recommended applications: Deburring, removing welding seams, working sharp edges. Work surfaces: Stainless steel.

Thin cut-off disc for stainless steel. Grit A36N. Type 41 flat shape. Main features and benefits: Top-quality product specially designed for cutting stainless steel. It ensures long life as well as fast, thin and accurate cutting operations whilst minimizing waste and burrs. Recommended applications: Cutting sheet metals, pipes, box beams, sections and solid metal structures. Work surfaces: Stainless steel.

Cut-off disc for stainless steel. Grit A36N. Type 42 depressed centre. Main features and benefits: This product ensures fast and accurate cutting operations. Maximum life. Excellent lateral stability. Its depressed centre makes the structure more rigid. Recommended applications: Cutting sheet metals, pipes, box beams, sections and solid metal structures. Work surfaces: Stainless steel.

The LogTag ST100T-15 external sensor is a strong and safe external sensor specifically designed for use with food. This external sensor is suitable for measuring the core temperature of a product. Place the sensor in the food and measure the temperature accurately.

Stainless steel operations need a well-experienced team and new technologies to process. We have been operating precious metals for more than 20 years.

It is the quality with the best malleability feature among the austenitics. Its malleability capability is around 78% and it is named as the automat of stainless steel. Although the sulfur (S) addition improves its malleability, it also reduces corrosion resistance (lower than 304) and weakens its formability, it is especially not suitable for straight bending. Despite sulfur, its toughness degree is the same as 304.

Standard: ASTM, AISI, DIN, EN, GB, JIS, SUS Length: as your request Width: 1000-1280mm Place of Origin: China Type: CoilCircle,Sheet Application: Construction., Bending, Shaping, Drawing Certification: ISO Processing Service: Cutting Technical Treatment: Cold Rolled Surface: BA, 2B, 2D, HL, #4, SB Edge: Mill-Edge or Slit-Edge Tolerance: ±0.02mm Supply Ability: 10000 Metric Ton/Metric Tons per Month 410 stainless steel Packaging Details: Standard export packing Lead time: 15-30days Payment term: T/T,L/C etc. Port of shippment: Xiamen,China

CNC Turning stainless steel pipe

Stainless steel is a very common material to use in fabrication projects, thanks to its versatility and durability, among others. Stainless steel possesses high good corrosion resistance which makes it the primary option for industries such as pharmaceuticals, food, petrochemicals and machinery.The versatility of stainless steel requires different fabricating techniques. Stainless steel is a sensitive material which requires delicate weld preparation practices such as thorough surface preparation prior to commencement of welding. Shoddy surface cleaning may compromise the material features such as corrosion resistance. Stainless steel has definite advantages over other metals and, it’s one of the most expensive metal. This high cost puts additional pressure on fabricators to be more careful in fabrication processes. Stainless steel should be fabricated in a specialized clean workshop to prevent contamination. Also it required specialist steel contractors

CNC Turning stainless steel part

Stainless Steel Investment Casting Graphite iron castings Gray iron casting Huan-Tai specialize in investment castings, sand castings, die castings, gravity castings in material of carbon steel, alloy steel, cast iron, ductile iron, aluminum, bronze and custom material. Typical products include custom casting parts, trailer parts, agricultural gearbox, gear, gear shaft, CNC machining parts, train parts, wear resistant parts, crusher parts like liner plates, bowl liner, jaw plate, mantle, heavy castings, coal mining machinery parts and aluminum castings & bronze castings etc. We strive to provide the high quality castings with tight tolerance and try to avoid defects delivered to our customers. Our inspection: 1.Metal testing and analysis, mechanical properties, microstructure, spectrometer and furnace chemical composition analysis. 2.Non-destruction inspection: MPE, LPE, UE and RE 3.Dimension inspection: well experienced inspector team 4.Quality control 5.

Laser cutting welding sheet metal parts

Etched stainless steel 304 plate

Etched stainless steel 304 gasket

CNC Turning stainless steel 304 gear part