Sleeve bearings - Import export

Elastomer sleeves are available on request for Franke LSA slim bearings. They are used for tolerance compensation and for vibration decoupling. The smooth running can be significantly increased by an elastomer sleeve. Elastomer sleeves for the LSA 6/8 also offer additional sealing of the bearing due to the overlapping of the edges. Elastomer sleeves for Franke slim bearings are available from stock. They can be ordered when you buy a slim bearing and are then included in the delivery. For series production, elastomer sleeves are available by the meter for self-cutting. We recommend gluing the ends with cyanoacrylate glue (e.g. Loctite 406). The use of the elastomer sleeve slightly reduces the stiffness and accuracy of the bearing. The basic static load rating of the bearing also decreases slightly. We would be happy to advise you on the design and construction.

Experience superior performance and reliability with our HPV PEEK Sleeve Bearings. Engineered with precision, these PEEK bearings are designed to excel in demanding applications where high temperature, chemical resistance, and wear resistance are essential. The self-lubricating properties of PEEK ensure smooth operation and reduce maintenance requirements. With our PEEK Sleeve Bearings, you can trust in their long-lasting durability and exceptional performance, making them the ideal choice for critical industrial applications.

These flanges sleeve bearings have lubrication fully applied and are appropriate for general-purpose applications like conveyors, machines, and appliances. Ø30mm and above sleeves bearing with flange are manufactured according to your technical drawing dimensions.

Complement of the lubricant-free delivery programs of screw drives small sizes. With spindles made of stainless steel and nuts made of the self-lubricating high-performance plastic iglidur® J. Application areas:small handlings, lab and medical technology, professional model construction, scanner, printer and locking systems Sleeve bearing with flange

"The high voltage motors can be made of cast iron or welded steel (lighter solution). HIGH VOLTAGE MOTORS WITH CAGE: - Three-phase motors with cast iron cage - High voltage motors between 3 and 13.8kV - Power from 160kW to 10MW - IP55 or IP23 protection - Efficiency IE3/IE4 (tomorrow IE5) - Standard or custom sizes are available for sale - 2-4-6 poles stocked motors up to 1,2MW, IC411 cooling - Customized motors according to your specifications or to replace an existing motor will be delivered to you - Cooling mode IC411-IC416-IC511-IC611-IC616-ICW81 - Ball or sleeve bearings"

Bearing PEEK Material Performance Experience the superior performance of composite PEEK plain and sleeve bearings. These high-performance bearings combine the strength and durability of composite materials with the low-friction properties of PEEK, resulting in exceptional wear resistance, self-lubrication, and extended service life. Whether it's in demanding industrial applications or precision machinery, these composite PEEK bearings deliver reliable and smooth motion, ensuring optimal performance and reduced maintenance.

Hydraulic pull-in device for mounting bearings max. pulling force 100 kN, stroke up to 200 mm, horizontal design Application The bearing press is suitable for the simple mounting of bearings, plain bearings or sleeves/bushings by hydraulically pulling them into the bearing seat. Main areas of application - Industrial assembly workstations - Mounting bearings in housings - Maintenance work - Bearing assembly on large/heavy components Description The bearing press is designed for the hydraulic insertion of bearings into housing components and is available in a horizontal design. Guided on a knuckle boom crane with a balancer (not included in the delivery), the bearing press can be used ergonomically anywhere and can also be mounted on a trolley. The pullin cylinder can be used either from the right or left by converting the hydraulic cylinder. The device is operated by means of a twohand control.

Mounting plate steel/plastic. Monitor bracket aluminium. Bearing washers and sleeves plastic. Mounting flange aluminium. Mounting adapter aluminium. Screws steel. Version: Mounting plate painted. Monitor bracket painted. Mounting flange painted. Mounting adapter painted. Screws electro zinc-plated

Kigema manufactures and regenerates used cast-steel and cast-iron sleeves . The company has a long track-record of manufacturing sleeve bodies made of brass and bronze. Covering surfaces of bushing with white metal is also in scope of our work.

Kigema works with producers of large-size machinery, such as industrial gearboxes, worm gears, hydraulic presses, mining equipment, pumps. We supply rings, discs and sleeves made of bearing alloys, as well as other components according to customer documentation. Wide range of copper-based products, Complete manufacturing solutions according to customer drawings, Flexible approach to customer's needs, No minimum order quantity Quality management systems, Short lead times, Patented and efficient technology, Continuous development of the offer.

Bearings, sliding bearings, half bearings, bushes, worm gears, sealing rings, gears, shaft, screw nuts, rings, sleeves and plain bearing, stator parts, slot wedges, spacers, washers, covers, copper and steel parts, epoxy insulating materials, machining off retaining rings, coils, fans, slipping rings, spacers wedges. APPLICATION SECTORS Our clients are manufacturers of special machines for the processing, paper, automotive, aviation industries, and many others. We have extensive experience in making parts for electrical machines such as electric motors and generators for power plants throughout Europe. For many years we have supplied spare parts for generators renovated by ALSTOM, ETHOS ENERGY and GE Power.

Bearings, sliding bearings, half bearings, bushes, worm gears, sealing rings, gears, shaft, screw nuts, rings, sleeves and plain bearing, stator parts, slot wedges, spacers, washers, covers, copper and steel parts, epoxy insulating materials, machining off retaining rings, coils, fans, slipping rings, spacers wedges. APPLICATION SECTORS Our clients are manufacturers of special machines for the processing, paper, automotive, aviation industries, and many others. We have extensive experience in making parts for electrical machines such as electric motors and generators for power plants throughout Europe. For many years we have supplied spare parts for generators renovated by ALSTOM, ETHOS ENERGY and GE Power.

Bearings, sliding bearings, half bearings, bushes, worm gears, sealing rings, gears, shaft, screw nuts, rings, sleeves and plain bearing, stator parts, slot wedges, spacers, washers, covers, copper and steel parts, epoxy insulating materials, machining off retaining rings, coils, fans, slipping rings, spacers wedges. APPLICATION SECTORS Our clients are manufacturers of special machines for the processing, paper, automotive, aviation industries, and many others. We have extensive experience in making parts for electrical machines such as electric motors and generators for power plants throughout Europe. For many years we have supplied spare parts for generators renovated by ALSTOM, ETHOS ENERGY and GE Power.

Bearings, sliding bearings, half bearings, bushes, worm gears, sealing rings, gears, shaft, screw nuts, rings, sleeves and plain bearing, stator parts, slot wedges, spacers, washers, covers, copper and steel parts, epoxy insulating materials, machining off retaining rings, coils, fans, slipping rings, spacers wedges. APPLICATION SECTORS Our clients are manufacturers of special machines for the processing, paper, automotive, aviation industries and many others. We have extensive experience in making parts for electrical machines such as electric motors and generators for power plants throughout Europe.For many years we have supplied spare parts for generators renovated by ALSTOM, ETHOS ENERGY and GE Power.

Bearings, sliding bearings, half bearings, bushes, worm gears, sealing rings, gears, shaft, screw nuts, rings, sleeves and plain bearing, stator parts, slot wedges, spacers, washers, covers, copper and steel parts, epoxy insulating materials, machining off retaining rings, coils, fans, slipping rings, spacers wedges. APPLICATION SECTORS Our clients are manufacturers of special machines for the processing, paper, automotive, aviation industries, and many others. We have extensive experience in making parts for electrical machines such as electric motors and generators for power plants throughout Europe. For many years we have supplied spare parts for generators renovated by ALSTOM, ETHOS ENERGY, and GE Power.

The FRP is Geppert Ruhrtechnik’s fast running pneumatic air mixer that can be directly mounted on 200 l steel drums with a 2“ bung hole. The FRP is mounted onto the drum with a 2” threaded adapter. The agitator is screwed into the bung hole. We do offer one drive especially adapted for low viscous media and one drive especially adapted for medium viscous media of up to 1,000 mPas. The agitator shaft is connected to a bearing shaft within the drum mixer housing by means of a sleeve coupling. This bearing shaft is connected to the drive shaft. Folding propellers are used as agitator elements, which can be inserted into the drum through the 2” bung hole when being folded. As a mobile mixer, the FRP can be delivered as a turn-key machine with a service kit for the lubrication of the compressed air and a noise muffler.

FRP - Pneumatic drum mixer The FRP is Geppert Rührtechnik’s fast running pneumatic air mixer that can be directly mounted on 200 l steel drums with a 2“ bung hole. The FRP is mounted onto the drum with a 2” threaded adapter. The agitator is screwed into the bung hole. We do offer one drive especially adapted for low viscous media and one drive especially adapted for medium viscous media of up to 1,000 mPas. The agitator shaft is connected to a bearing shaft within the drum mixer housing by means of a sleeve coupling. This bearing shaft is connected to the drive shaft. Folding propellers are used as agitator elements, which can be inserted into the drum through the 2” bung hole when being folded. As a mobile mixer, the FRP can be delivered as a turn-key machine with a service kit for the lubrication of the compressed air and a noise muffler. Additionally we can provide you with a vessel clamp applicable for open lid drums.

FX-C lifting magnets have a round, multipole clamping surface, designed for lifting rings, sleeves, bearing housings, flange plates and similar workpieces.The load specification is valid for full-surface mounting on workpieces which cover D inside to D outside (see table Dimensions), for workpieces with a smaller mounting surface an approximate maximum workpiece weight of 3.5 kg per cm² clamping surface can be calculated. For serial workpieces, a documented test should confirm the safety factor 3.

PTFE Ultra Universal lubricant with PTFE, suitable for lubricating various components such as sleeve bearings, ball bearings, hinges, chains and wires. Benefits: Clean lubrication. Long tool life. Very low friction coefficient. High penetration capacity. Water-resistant. Anti-corrosive.

Molith EP is a high quality lubricant with graphite and molybdenum sulphide which is ideal for difficult applications subject to heavy loads or shocks (sleeve bearings, ball and socket joints, joints, rollers, copings, ...). Benefits Outstanding multifunctional grease with exceptional friction properties due to the graphite and molybdenum sulphide. Very high resistance to shocks and heavy loads. Easy to pump and inject. Very good water resistance, even to boiling water. High drop point.

Aircraft applications demand bushings and bearings that deliver outstanding durability, to ensure consistent performance despite changes in temperature and air pressure. We have led the industry in the production of Pfinodal® (C72900) with superior bearing properties for aircraft landing gear material. Our production processes and heat treatments combine to ensure the high hardness required in a bearing material for aircraft bearing sleeves, and bushings for landing gear. Products We offer Pfinodal® (UNS C72900) that delivers superior mechanical and physical properties in comparison to conventional high-performance alloys. The material has been in use for more than 20 years under patent numbers 5527113 and 5552106 for rock bit bearing applications before the aerospace industry also moved towards these bushing sleeve materials for their anti-galling, low friction and high hardness characteristics.

AMETEK Specialty Metal Products has built a reputation for first class product quality and reliability, and that’s why so many leading commercial and defense aviation programs use our high performance materials. 50 years Aerospace Expertise We have more than 50 years experience developing precision strip, wire and shaped component products for critical aerospace applications worldwide. Our aerospace portfolio includes: High Tolerance Custom Shaped Wire for Aircraft Push-Pull Controls Pfinodal® (C72900) Bearing Material for Landing Gear Bushings and Bearing Sleeves Specialty Shaped Wire for Lock Collar Tape used in Aerospace Rivets Highly Conductive Nickel Strip for Aerospace Electronic Connectors, Batteries, Heat Exchangers and Bellows. Lighter and Stronger Materials for Aircraft Performance At 35,000 feet, every detail matters. We’re dedicated to manufacturing precision, lightweight and high strength materials to enhance the performance and efficiency of aircraft worldwide.

As the need for fans that are used in applications subject to high temperatures is constantly on the increase, SEPA EUROPE is presenting its latest sleeve bearing fan equipped with MagFix technology that can be used for operating temperatures up to 85 °C. An added advantage is the extraordinary high life expectancy of 210.000 h (MTBF). This fan is not only available in the standard sizes but also as a tailor-made solution. With the high operating temperature of up to 85 °C, this innovative fan generation by SEPA EUROPE opens up a wide range of new applications for the user, not least the automotive sector. The term MagFix stands for magnetic fixation (positioning) of the fan propeller/rotor in sleeve bearing fans.

The model TNZ ZCAK is a TNZ ZCA coupling with limited end float. The limitation of the end float serves to axially locate a shaft that is mounted on sleeve bearings. The rotor of an electric motor with sleeve bearings can thus be aligned within a desired tolerance range via the coupling to the bearing of the driven machine so that the rotor remains at its magnetic centre during acceleration of the driving machine. The limitation of the end float constrains the ability to compensate for angular and radial shaft misalignments. TNZ ZCBK: Double engagement design with a bolt-on O-ring carrier and limited end float The model TNZ ZCBK is a TNZ ZCB coupling with limited end float. The limitation of the end float serves to axially locate a shaft that is mounted on sleeve bearings. The rotor of an electric motor with sleeve bearings can thus be aligned within a desired tolerance range via the coupling to the bearing of the driven machine, so that the rotor remains at its magnetic centre during

One of the most popular SEPA EUROPE fans is the axial fan with the dimensions 40x40x10 mm and the popular Magfix® sleeve bearing. This year it underwent complete revision and further development. The new fan generation is known as the LF40P and with the same external dimensions is installed in the same way as the previous model. The new and currently unique rotor geometry is obvious at first sight. It is completely different from the previous shape and layout. Thanks to the distinctive rotor blade with a cut, either a clear noise reduction can be achieved at the same speed or the same noise level as previous generations with 25% more air performance. The current model is equipped with the SEPA MagFix® bearing and PWM input with which the speed can be set to meet the necessary requirements. The LF40P is an excellent example for the permanent further development of products at SEPA EUROPE.

The fan and cooling specialist SEPA EUROPE has now added three further models to its slimline radial fan series. The latest additions impress with their compact dimensions of 38 x 40 x 5 mm, 54 x 52 x 6 mm and 45 x 45 x 4 mm and have more than deserved the name „slimline“. All fans are equipped with the reliable Magfix sleeve bearings and have a service life of 210 000 h (MTBF) and 40 000 h /L10) at 40 °C. The PWM input in combination with the tacho output enables the speed to be controlled and monitored. It is not obvious at first glance, but the Model HY45AB05PNK00A tops with a pressure of 143 Pa. The new models will be included in the standard range and will therefore be available shortly from stock. SEPA EUROPE specializes in customized cooling solutions. Thanks to over 25 years of experience, SEPA EUROPE can offer you the appropriate solution for virtually every task.

Chip cooling with the aid of heat sinks usually requires a lot of space and is not only heavy but also expensive. The specialists at SEPA EUROPE have developed a chip cooler with minimum space requirements for compact designs. The core component of the compact cooler is the ultra-flat blower HY40H that is combined with a Kühligel® of pure aluminium. The special feature of the new cooling solution is its variability which means that the size and shape of the heat sink can be freely chosen. Users can thus assemble the cooler to optimally fulfil their requirements. With a thermal resistance of a mere 2.5 K/W, the new chip cooler withstands a power dissipation of up to 15 W and in doing so guarantees the operational safety of the entire embedded system. The blower is equipped with the highly durable Magfix® sleeve bearing and has an impressive service life expectancy of von 210 000 h (MTBF) at 40 °C.

The new super flat active chip cooler of the cooling specialist SEPA EUROPE is a convincing solution for applications in the embedded computing sector, in particular for single board computers. The HZ25B05 with its dimensions of 25x25x6.5 mm can be installed even in flat applications and ensures highly effective heat dissipation. The size of this super flat design is not its only advantage, but also its exceptionally low noise level. The heat sink is made of high-purity aluminium and has low thermal resistance. The integrated micro fan is also equipped with a special, highly durable MagFix® sleeve bearing designed for operating temperatures of up to 80°C. Particularly noteworthy is the fact that the micro fan which is operated with a voltage of 5VDC, has a power input of only 0.3 W and a life expectancy of 400000 hours. The fan can also be equipped, if necessary, with a tacho output for monitoring the function. Both and the fan and the heat sink are available separately.

The significance of air quality measurements whether in industry, households or in vehicles is constantly increasing. Manufacturers therefore, should equip their applications with the optimal sensor fan and in this respect SEPA EUROPE is exactly the right partner! SEPA EUROPE has complemented its range of microfans with the radial fan HY20A with the dimensions of 20 x 20 x 6.3 mm. The air intake of the radial fan which is on one side is 2 l/min and with a sound pressure level of 5dB(A) at a distance of 1m, it is virtually inaudible. As is the case with all microfans, the HY20A is equipped with the reliable Magfix sleeve bearing and has a service life of 400 000 h (MTBF) or 50 000 h (L10) at 40°C. The tachometer output constantly monitors the speed at which the fan is running. The HY20A is also an interesting solution for the cooling of hot spots in embedded applications. This compact blower ensures that optimal use is made of limited installation space.